show ip eigrp route

To display the Enhanced Interior Gateway Routing Protocol (EIGRP) routes, use the show ip eigrp route-map statistics command in any mode.

show ip eigrp [instance-tag] route [ip-prefix/length] [active] [all-links] [detail-links] [pending] [summary] [zero-successors] [vrf {vrf-name | all | default | management}]

Syntax Description

instance-tag

(Optional) Name of the EIGRP instance. The instance tag can be any case-sensitive, alphanumeric string up to 20 characters.

ip-prefix/length

(Optional) IP address in four-part, dotted-decimal notation with a network mask indicated as a slash (/) and number. For example, /8 indicates that the first 8 bits of the mask are 1s, and the corresponding bits of the address are the network address.

active

(Optional) Displays only active entries in the EIGRP topology table.

all-links

(Optional) Displays all entries in the EIGRP topology table.

detail-links

(Optional) Displays detailed information for all entries in the EIGRP topology table.

pending

(Optional) Displays all entries in the EIGRP topology table that are waiting for an update from a neighbor or are waiting to reply to a neighbor.

summary

(Optional) Displays a summary of theEIGRP topology table.

zero-successors

(Optional) Displays available routes in the EIGRP topology table.

vrf vrf-name

(Optional) Specifies the name of the virtual routing and forwarding (VRF) instance. The vrf-name argument can be specified as any case-sensitive, alphanumeric string up to 32 characters.

all

(Optional) Specifies all VRF instances.

default

(Optional) Specifies the default VRF.

management

(Optional) Specifies the management VRF.


Command Default

None

Command Modes

Any command mode

Command History

Release
Modification

5.0(3)N1(1)

This command was introduced.


Usage Guidelines

This command requires a LAN Base Services license.

Examples

This example shows how to display the EIGRP routes:

switch# show ip eigrp route 
IP-EIGRP Topology Table for AS(65535)/ID(3.1.1.1) VRF default

Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
       r - reply Status, s - sia Status

P 192.0.2.0/24, 7 successors, FD is 13056
        via 192.0.2.1 (13056/12800), Ethernet2/7
        via 192.0.2.5 (13056/12800), Ethernet1/26
        via 192.0.2.3 (13056/12800), Ethernet3/12
        via 192.0.2.6 (13056/12800), Ethernet3/11
        via 192.0.2.4 (13056/12800), port-channel2000
        via 192.0.2.2 (13056/12800), Ethernet2/6
        via 192.0.2.7 (13056/12800), Ethernet2/5
P 192.0.2.1/24, 7 successors, FD is 13056
        via 192.0.2.1 (13056/12800), Ethernet2/7
        via 192.0.2.2 (13056/12800), Ethernet2/6
        via 192.0.2.3 (13056/12800), Ethernet3/12
        via 192.0.2.4 (13056/12800), port-channel2000
        via 192.0.2.6 (13056/12800), Ethernet3/11
        via 192.0.2.5 (13056/12800), Ethernet1/26
        via 192.0.2.7 (13056/12800), Ethernet2/5
P 192.0.2.5/24, 7 successors, FD is 13056
        via 192.0.2.1 (13056/12800), Ethernet2/7
<--Output truncated-->
switch#

Related Commands

Command
Description

clear ip eigrp route-map statistics

Clears route-map statistics for EIGRP.

show ip eigrp traffic

Displays EIGRP traffic statistics.

show running-config eigrp

Displays EIGRP running configuration information.