To display the Dynamic ARP Inspection (DAI) configuration status, use the show ip arp inspection command.
show ip arp inspection
This command has no arguments or keywords.
None
Any command mode
|
Release |
Modification |
|
5.0(3)N1(1) |
This command was introduced. |
This example shows how to display the status of the DAI configuration:
switch# show ip arp inspection
|
Command |
Description |
|---|---|
|
ip arp inspection vlan |
Enables DAI for a specified list of VLANs. |
|
show ip arp inspection interface |
Displays the trust state and the ARP packet rate for a specified interface. |
|
show ip arp inspection log |
Displays the DAI log configuration. |
|
show ip arp inspection statistics |
Displays the DAI statistics. |
|
show ip arp inspection vlan |
Displays DAI status for a specified list of VLANs. |
|
show running-config dhcp |
Displays DHCP snooping configuration, including the DAI configuration. |