show ip arp inspection log

To display the Dynamic ARP Inspection (DAI) log configuration, use the show ip arp inspection log command.

show ip arp inspection log

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Any command mode

Command History

Release
Modification

5.0(3)N1(1)

This command was introduced.


Examples

This example shows how to display the DAI log configuration:

switch# show ip arp inspection log 

Syslog Buffer Size : 12
Syslog Rate        : 5 entries per 1 seconds
switch# 

Related Commands

Command
Description

clear ip arp inspection log

Clears the DAI logging buffer.

ip arp inspection log-buffer

Configures the DAI logging buffer size.

show ip arp inspection

Displays the DAI configuration status.

show running-config dhcp

Displays DHCP snooping configuration, including the DAI configuration.