show feature

To display the status of features on a switch, use the show feature command.

show feature

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

EXEC mode

Command History

Release
Modification

4.0(0)N1(1a)

This command was introduced.


Examples

This example shows how to display the state of all features on a switch:

switch# show feature 
Feature Name          Instance  State
--------------------  --------  --------
cimserver             1         disabled
fabric-binding        1         disabled
fc-port-security      1         disabled
fcoe                  1         enabled
fcsp                  1         disabled
fex                   1         enabled
fport-channel-trunk   1         disabled
http-server           1         enabled
interface-vlan        1         enabled
lacp                  1         enabled
lldp                  1         enabled
npiv                  1         enabled
npv                   1         disabled
port_track            1         disabled
private-vlan          1         disabled
sshServer             1         enabled
tacacs                1         enabled
telnetServer          1         enabled
udld                  1         enabled
vpc                   1         enabled
vtp                   1         disabled
switch#

Related Commands

Command
Description

feature

Enables or disables a feature on the switch.