show fctimer

To display the Fibre Channel timers (fctimer), use the show fctimer command.

show fctimer [d_s_tov [vsan vsan-id] | e_d_tov [vsan vsan-id] | f_s_tov [vsan vsan-id] | r_a_tov [vsan vsan-id] | last action status | pending | pending-diff | session status | status | vsan vsan-id]

Syntax Description

d_s_tov

(Optional) Displays the distributed services time out value (D_S_TOV) in milliseconds.

vsan vsan-id

(Optional) Displays information for a Virtual SAN (VSAN). The range is from 1 to 4093.

e_d_tov

(Optional) Displays the error detection timeout value (E_D_TOV) in milliseconds.

f_s_tov

(Optional) Displays the fabric stability timeout value (F_S_TOV) in milliseconds.

r_a_tov

(Optional) Displays the resource allocation time out value (R_A_TOV) in milliseconds.

last action status

(Optional) Displays the status of the last Cisco Fabric Services (CFS) commit or discard operation.

pending

(Optional) Displays the status of pending fctimer commands.

pending-diff

(Optional) Displays the difference between the pending database and running configuration.

session status

(Optional) Displays the state of the fctimer CFS session.

status

(Optional) Displays the Fibre Channel timer status.


Command Default

None

Command Modes

EXEC mode

Command History

Release
Modification

4.0(0)N1(1a)

This command was introduced.


Examples

This example shows how to display the configured global TOVs:

switch# show fctimer 

This example shows how to display the configured TOVs for a specified VSAN:

switch# show fctimer vsan 10 

Related Commands

Command
Description

fctimer

Configures fctimer parameters.