show environment fex

To display the environmental sensor status, use the show environment fex command.

show environment fex {all | chassis_ID} [temperature | power | fan]

Syntax Description

all

Displays information for all Fabric Extender chassis.

chassis_ID

Fabric Extender chassis ID. The chassis ID range is from 100 to 199.

temperature

(Optional) Displays temperature sensor information.

power

(Optional) Displays power capacity and power distribution information.

fan

(Optional) Displays fan information.


Command Default

None

Command Modes

EXEC mode

Command History

Release
Modification

4.0(1a)N2(1)

This command was introduced.


Examples

This example shows how to display the environmental sensor status for a Fabric Extender:

switch# show environment fex 100 

Temperature Fex 100:
-----------------------------------------------------------------
Module   Sensor     MajorThresh   MinorThres   CurTemp     Status
                    (Celsius)     (Celsius)    (Celsius)
-----------------------------------------------------------------
1        Outlet-1   85            75           50          ok
1        Inlet-1    100           90           37          ok

Fan Fex: 100:
------------------------------------------------------
Fan             Model                Hw         Status
------------------------------------------------------
Chassis         N2K-C2148-FAN        --         ok
PS-1            N5K-PAC-200W         --         ok
PS-2            --                   --         absent

Power Supply Fex 100:
---------------------------------------------------------------------------
Voltage: 12 Volts
-----------------------------------------------------
PS  Model                Power       Power     Status
                         (Watts)     (Amp)
-----------------------------------------------------
1   N5K-PAC-200W            0.00      0.00     ok
2   --                        --        --     --

Mod Model                Power     Power       Power     Power       Status
                         Requested Requested   Allocated Allocated
                         (Watts)   (Amp)       (Watts)   (Amp)
--- -------------------  -------   ----------  --------- ----------  ----------
1    N5K-C5110T-BF-1GE   24.00     2.00        24.00     2.00        powered-up

Power Usage Summary:
--------------------
Power Supply redundancy mode:                 redundant

Total Power Capacity                                0.00 W

Power reserved for Supervisor(s)                   24.00 W
Power currently used by Modules                     0.00 W

                                                -------------
Total Power Available                             -24.00 W
                                                -------------
switch#

Related Commands

Command
Description

show fex

Displays all configured Fabric Extender chassis connected to the switch.