show checkpoint

To display the configuration at the time a checkpoint was implemented, use the show checkpoint command.

show checkpoint [checkpoint-name] [all [system | user]]

Syntax Description

checkpoint-name

(Optional) Checkpoint name. The name can be a maximum of 32 characters.

all

(Optional) Displays user-configured and system-configured checkpoints.

system

(Optional) Displays all system-configured checkpoints.

user

(Optional) Displays all user-configured checkpoints.


Command Default

None

Command Modes

EXEC mode

Command History

Release
Modification

5.0(2)N1(1)

This command was introduced.


Usage Guidelines

The command output displays a history of the most recent (up to ten) checkpoint IDs. The checkpoint IDs represent the rollback points that allow the user to restore the system to a checkpoint configuration.

Examples

This example shows how to display the rollback checkpoints configured in the local switch:

switch# show checkpoint 
--------------------------------------------------------------------------------
Name: chkpnt-1

!Command: Checkpoint cmd vdc 1
!Time: Mon Sep  6 09:40:47 2010

version 5.0(2)N1(1)
feature telnet
feature tacacs+
cfs eth distribute
feature private-vlan
feature udld
feature interface-vlan
feature lacp
feature vpc
feature lldp
feature fex

username adminbackup password 5 !  role network-operator
username admin password 5 $1$KIPRDtFF$7eUMjCAd7Nkhktzebsg5/0  role network-admin
no password strength-check
ip domain-lookup
ip domain-lookup
hostname switch
ip access-list ip1
class-map type qos class-fcoe
  match cos 4
class-map type qos match-all cq1
  match cos 4
  match precedence 7
class-map type qos match-all cq2
  match cos 5
  match dscp 10
class-map type qos match-any cq3
  match precedence 7

<--output truncated-->
switch#

This example shows how to display information about a specific checkpoint:

switch# show checkpoint chkpnt-1 
--------------------------------------------------------------------------------
Name: chkpnt-1

!Command: Checkpoint cmd vdc 1
!Time: Mon Sep  6 09:40:47 2010

version 5.0(2)N1(1)
feature telnet
feature tacacs+
cfs eth distribute
feature private-vlan
feature udld
feature interface-vlan
feature lacp
feature vpc
feature lldp
feature fex

username adminbackup password 5 !  role network-operator
username admin password 5 $1$KIPRDtFF$7eUMjCAd7Nkhktzebsg5/0  role network-admin
no password strength-check
ip domain-lookup
ip domain-lookup
hostname switch
ip access-list ip1
class-map type qos class-fcoe
  match cos 4
class-map type qos match-all cq1
  match cos 4
  match precedence 7
--More--
switch#

This example shows how to display all configured rollback checkpoints:

switch# show checkpoint all 

Related Commands

Command
Description

checkpoint

Creates a checkpoint.

rollback

Rolls back the configuration to any of the saved checkpoints.

show checkpoint summary

Displays configuration rollback checkpoints summary.

show checkpoint system

Displays system-defined rollback checkpoints.

show checkpoint user

Displays user-configured rollback checkpoints.