san-port-channel persistent

To convert an autocreated SAN port channel to a persistent SAN port channel, use the san-port-channel persistent command.

san-port-channel port-channel-id persistent

Syntax Description

port-channel-id

Port channel ID. The range is from 1 to 128.

persistent

Converts the autocreated SAN port channel to a persistent SAN port channel


Command Default

None

Command Modes

EXEC mode

Command History

Release
Modification

4.0(0)N1(1a)

This command was introduced.


Usage Guidelines

This command is not reversible. A user-created channel group cannot be converted to an autocreated channel group.When the san-port-channel persistent command is applied to an autocreated channel group, the channel group number does not change and the properties of the member ports change to those of a user-created channel group. The channel mode remains active.

Examples

This example shows how to change the properties of an autocreated channel group to a persistent channel group:

switch# san-port-channel 10 persistent 

Related Commands

Command
Description

san-port-channel protocol

Enables the SAN port channel protocol.

show interface port-channel

Displays SAN port channel interface information.

show port-channel

Displays SAN port channel information.