locator-led fex

To turn on the locator LED of a Fabric Extender, use the locator-led command. To turn off the locator LED, use the no form of this command.

locator-led fex chassis_ID

no locator-led fex chassis_ID

Syntax Description

chassis_ID

Fabric Extender chassis ID. The range is from 100 to 199.


Command Default

None

Command Modes

EXEC mode

Command History

Release
Modification

4.1(3)N1(1)

This command was introduced.

Note On a Cisco Nexus 5000 Series switch that runs a Cisco NX-OS release prior to 4.1(3)N1(1), the locator beacon LED was toggled with the beacon command.


Usage Guidelines

Use the locator-led command to toggle the locator LED of a Fabric Extender, which allows you to easily identify the machine in a busy data center.

Examples

This example shows how to turn on the locator LED for a specific Fabric Extender chassis:

switch# locator-led fex 100 
switch# 

This example shows how to turn off the locator beacon LED for a specific Fabric Extender chassis:

switch# no locator-led fex 100 
switch# 

Related Commands

Command
Description

show fex

Displays all configured Fabric Extender chassis connected to the switch.

show locator-led

Displays the status of the locator LED in Fabric Extender modules.