ip msdp flush-routes

To flush routes when the Multicast Source Discovery Protocol (MSDP) process is restarted, use the ip msdp flush-routes command. To leave routes in place, use the no form of this command.

ip msdp flush-routes

no ip msdp flush-routes

Syntax Description

This command has no arguments or keywords.

Command Default

The routes are not flushed.

Command Modes

Global configuration mode

Command History

Release
Modification

5.0(3)N1(1)

This command was introduced.


Usage Guidelines

To display whether flush routes is configured, use this command line:

switch(config)# show running-config | include flush-routes

This command requires the LAN Base Services license.

Examples

This example shows how to configure flushing routes when the MSDP process is restarted:

switch(config)# ip msdp flush-routes

This example shows how to configure leaving routes when the MSDP process is restarted:

switch(config)# no ip msdp flush-routes

Related Commands

Command
Description

show running-config

Displays information about the running-system configuration.