ip igmp snooping v3-report-suppression (VLAN)

To configure IGMPv3 report suppression and proxy reporting for VLANs, use the ip igmp snooping v3-report-suppression command. To remove IGMPv3 report suppression, use the no form of this command.

ip igmp snooping v3-report-suppression

no ip igmp snooping v3-report-suppression

Syntax Description

This command has no arguments or keywords.

Command Default

Enabled

Command Modes

VLAN configuration mode

Command History

Release
Modification

5.0(3)N1(1)

This command was introduced.


Usage Guidelines

If this setting is disabled for the device, which is the default value, then it is disabled for all VLANs, irrespective of how you set this value for an individual VLAN. However, once you set the global setting to enabled, the settings for all the VLANs are enabled by default.

This command does not require a license.

Examples

This example shows how to configure IGMPv3 report suppression and proxy reporting for specified VLANs:

switch(config)# vlan 10-20
switch(config-vlan)# ip igmp snooping v3-report-suppression

This example shows how to remove IGMPv3 report suppression on specified VLANs:

switch(config)# vlan 10-20
switch(config-vlan)# no ip igmp snooping v3-report-suppression

Related Commands

Command
Description

show ip igmp snooping

Displays IGMP snooping information.