ip igmp flush-routes

To remove routes when the IGMP process is restarted, use the ip igmp flush-routes command. To leave routes in place, use the no form of this command.

ip igmp flush-routes

no ip igmp flush-routes

Syntax Description

This command has no arguments or keywords.

Command Default

The routes are not flushed.

Command Modes

Global configuration mode

Command History

Release
Modification

5.0(3)N1(1)

This command was introduced.


Usage Guidelines

To display whether flush routes are configured, use this command line:

switch(config)# show running-config | include flush-routes

This command does not require a license.

Examples

This example shows how to remove routes when the IGMP process is restarted:

switch(config)# ip igmp flush-routes

This example shows how to leave routes in place when the IGMP process is restarted:

switch(config)# no ip igmp flush-routes

Related Commands

Command
Description

show running-config

Displays information about the running-system configuration.