ip bandwidth eigrp

To configure the bandwidth metric on an Enhanced Interior Gateway Routing Protocol (EIGRP) interface, use the ip bandwidth eigrp command. To restore the default, use the no form of this command.

ip bandwidth eigrp instance-tag bandwidth

no ip bandwidth eigrp

Syntax Description

instance-tag

Name of the EIGRP instance. The instance-tag can be any case-sensitive, alphanumeric string up to 20 characters.

bandwidth

Bandwidth value. The range is from 1 to 2,560,000,000 kilobits.


Command Default

None

Command Modes

Interface configuration mode

Command History

Release
Modification

5.0(3)N1(1)

This command was introduced.


Usage Guidelines

This command requires the LAN Base Services license.

Examples

This example shows how to configure EIGRP to use a bandwidth metric of 10000 in autonomous system 209:

switch(config)# router eigrp 209
switch(config-router)# interface ethernet 2/1
switch(config-if)# no switchport
switch(config-if)# ip bandwidth eigrp 209 10000

Related Commands

Command
Description

ip bandwidth-percent eigrp

Sets the percent of the interface bandwidth that EIGRP can use.

show ip eigrp

Displays EIGRP information.