ip arp event-history errors

To log Address Resolution Protocol (ARP) debug events into the event history buffer, use the ip arp event-history errors command.

ip arp event-history errors size {disabled | large | medium | small}

no ip arp event-history errors size {disabled | large | medium | small}

Syntax Description

size

Specifies the event history buffer size to configure.

disabled

Specifies that the event history buffer size is disabled.

large

Specifies that the event history buffer size is large.

medium

Specifies that the event history buffer size is medium.

small

Specifies that the event history buffer size is small. This is the default buffer size.


Command Default

By default, the event history buffer is small.

Command Modes

Global configuration mode

Command History

Release
Modification

5.0(2)N1(1)

This command was introduced.


Examples

This example shows how to configure a medium ARP event history buffer:

switch(config)# ip arp event-history errors size medium 
switch(config)#

This example shows how to set the ARP event history buffer to the default:

switch(config)# no ip arp event-history errors size medium 
switch(config)#

Related Commands

Command
Description

show running-config arp all

Displays the ARP configuration, including the default configurations.