hardware multicast disable-slow-port-pruning

To disable slow port pruning on multicast packets, use the hardware multicast disable-slow-port-pruning command. To enable show port pruning, use the no form of this command.

hardware multicast disable-slow-port-pruning

no hardware multicast disable-slow-port-pruning

Syntax Description

This command has no arguments or keywords.

Command Default

Enabled

Command Modes

Global configuration mode

Command History

Release
Modification

5.0(2)N1(1)

This command was introduced.


Usage Guidelines


Note This command is applicable to only Cisco Nexus 5548 switches.


Examples

This example shows how to disable slow port pruning for multicast packets on a switch:

switch(config)# hardware multicast disable-slow-port-pruning 
switch(config)#

Related Commands

Command
Description

hardware unicast voq-limit

Enables the VOQ limit.

show running-config

Displays the running configuration on a switch.