flush-routes (EIGRP)

To flush all EIGRP routes in the unicast RIB when an EIGRP instance restarts, use the flush-routes command. To disable this feature, use the no form of this command.

flush-routes

no flush-routes

Syntax Description

This command has no arguments or keywords.

Command Default

Disabled

Command Modes

Router configuration mode

Command History

Release
Modification

5.0(3)N1(1)

This command was introduced.


Usage Guidelines

This command requires the LAN Base Services license.

Examples

This example shows how to flush routes when an EIGRP instance restarts:

switch(config)# router eigrp Test1
switch(config-router)# flush-routes
switch(config-router)#

Related Commands

Command
Description

show ip eigrp interfaces

Displays information about EIGRP interfaces.