fcinterop fcid-allocation

To allocate FCIDs on the switch, use the fcinterop fcid-allocation command. To disable FCIDs on the switch, use the no form of this command.

fcinterop fcid-allocation {auto | flat | none}

no fcinterop fcid-allocation {auto | flat | none}

Syntax Description

auto

Assigns a single FCID to compatible HBAs.

flat

Assign a single FCID.

none

Assigns an FCID range.


Command Default

The default is automatic allocation of FCIDs.

Command Modes

Global configuration mode

Command History

Release
Modification

4.0(0)N1(1a)

This command was introduced.


Usage Guidelines

This command defines how the switch assigns FCIDs.

Examples

This example shows how to set the FCID allocation to flat:

switch(config)# fcinterop fcid-allocation flat 

Related Commands

Command
Description

show flogi database

Displays the fabric login (FLOGI) table.