clear ip msdp sa-cache

To clear routes that match group entries in the Multicast Source Discovery Protocol (MSDP) Source-Active (SA) cache, use the clear ip msdp sa-cache command.

clear ip msdp sa-cache {* | group | group-prefix} [vrf {vrf-name | all | default | management}]

Syntax Description

*

Specifies all sources for the group from the SA cache..

group

Group address in the format A.B.C.D.

group-prefix

Group prefix in the format A.B.C.D/length.

vrf

(Optional) Clears the virtual routing and forwarding (VRF) instance information.

vrf-name

VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive.

all

Specifies that all VRF entries be cleared from the SA-cache.

default

Specifies that the default VRF entry be cleared from the SA-cache.

management

Specifies that the management VRF entry be cleared from the SA-cache.


Command Default

None

Command Modes

Any command mode

Command History

Release
Modification

5.0(3)N1(1)

This command was introduced.


Usage Guidelines

You can also use the clear ip msdp route command for the same function.

This command requires the LAN Base Services license.

Examples

This example shows how to clear the MSDP SA cache:

switch# clear ip msdp sa-cache
switch# 

Related Commands

Command
Description

clear ip msdp route

Clears the MSDP SA cache.

show ip msdp sa-cache

Displays route information in the MSDP Source-Active cache.