aaa authentication login error-enable

To configure that the authentication, authorization, and accounting (AAA) authentication failure message displays on the console, use the aaa authentication login error-enable command. To revert to the default, use the no form of this command.

aaa authentication login error-enable

no aaa authentication login error-enable

Syntax Description

This command has no arguments or keywords.

Command Default

Disabled

Command Modes

Global configuration mode

Command History

Release
Modification

4.0(0)N1(1a)

This command was introduced.


Usage Guidelines

When you log in, the login is processed by rolling over to the local user database if the remote AAA servers do not respond. In this situation, the following message is displayed if you have enabled the displaying of login failure messages:

Remote AAA servers unreachable; local authentication done. Remote AAA servers unreachable; local authentication failed. 

Examples

This example shows how to enable the display of AAA authentication failure messages to the console:

switch(config)# aaa authentication login error-enable 

This example shows how to disable the display of AAA authentication failure messages to the console:

switch(config)# no aaa authentication login error-enable 

Related Commands

Command
Description

show aaa authentication

Displays the status of the AAA authentication failure message display.