SMF CNDP "network-receive-error" 문제 해결 eno6/bd0 인터페이스
소개
이 문서에서는 특정 SMF(Session Management Function) CNDP(Cloud Native Deployment Platform)에 대한 컴퓨팅 및 리프 스위치를 식별하고 CEE(Common Execution Environment)에서 보고된 "network-receive-error" 알림을 해결하는 방법에 대해 설명합니다.
문제
"network-receive-error" 알림은 CEE Opcenter Rack2에서 보고됩니다.
[lab0200-smf/labceed22] cee# show alerts active summary
NAME UID SEVERITY STARTS AT SOURCE SUMMARY
-----------------------------------------------------------------------------------------------------------------------------------------------------
network-receive-error 998c77d6a6a0 major 10-26T00:10:31 lab0200-smf-mas Network interface "bd0" showing receive errors on hostname lab0200-s...
network-receive-error ea4217bf9d9e major 10-26T00:10:31 lab0200-smf-mas Network interface "bd0" showing receive errors on hostname lab0200-s...
network-receive-error 97fad40d2a58 major 10-26T00:10:31 lab0200-smf-mas Network interface "eno6" showing receive errors on hostname lab0200-...
network-receive-error b79540eb4e78 major 10-26T00:10:31 lab0200-smf-mas Network interface "eno6" showing receive errors on hostname lab0200-...
network-receive-error e3d163ff4012 major 10-26T00:10:01 lab0200-smf-mas Network interface "bd0" showing receive errors on hostname lab0200-s...
network-receive-error 12a7b5a5c5d5 major 10-26T00:10:01 lab0200-smf-mas Network interface "eno6" showing receive errors on hostname lab0200-...경고에 대한 설명은 Ultra Cloud Core Subscriber Microservices Infrastructure Operations Guide를 참조하십시오.
Alert: network-receive-errors
Annotations:
Type: Communications Alarm
Summary: Network interface "{{ $labels.device }}" showing receive errors on hostname {{ $labels.hostname }}"
Expression:
|
rate(node_network_receive_errs_total{device!~"veth.+"}[2m]) > 0
For: 2m
Labels:
Severity: major
경고문의 출처 확인
CEE labeed22에 로그인하고, bd0 및 eno6 인터페이스에 보고된 "network-receive-error" 알림 세부사항을 확인하여 노드 및 포드를 식별합니다.
[lab0200-smf/labceed22] cee# show alerts active summary
NAME UID SEVERITY STARTS AT SOURCE SUMMARY
---------------------------------------------------------------------------------------------------------------------------------------------------------
network-receive-error 3b6a0a7ce1a8 major 10-26T21:17:01 lab0200-smf-mas Network interface "bd0" showing receive errors on hostname tpc...
network-receive-error 15abab75c8fc major 10-26T21:17:01 lab0200-smf-mas Network interface "eno6" showing receive errors on hostname tp... show alerts active detail network-receive-error <UID>를 실행하여 알림의 세부 정보를 가져옵니다.
이 예에서 두 알림의 소스는 node lab0200-smf-primary-1 pod node-exporter-47xmm입니다.
[lab0200-smf/labceed22] cee# show alerts active detail network-receive-error 3b6a0a7ce1a8
alerts active detail network-receive-error 3b6a0a7ce1a8
severity major
type "Communications Alarm"
startsAt 2021-10-26T21:17:01.913Z
source lab0200-smf-primary-1
summary "Network interface \"bd0\" showing receive errors on hostname lab0200-smf-primary-1\""
labels [ "alertname: network-receive-errors" "cluster: lab0200-smf_cee-labceed22" "component: node-exporter" "controller_revision_hash: 75c4cb979f" "device: bd0" "hostname: lab0200-smf-primary-1" "instance: 10.192.1.42:9100" "job: kubernetes-pods" "monitor: prometheus" "namespace: cee-labceed22" "pod: node-exporter-47xmm" "pod_template_generation: 1" "replica: lab0200-smf_cee-labceed22" "severity: major" ]
annotations [ "summary: Network interface \"bd0\" showing receive errors on hostname lab0200-smf-primary-1\"" "type: Communications Alarm" ]
[lab0200-smf/labceed22] cee# show alerts active detail network-receive-error 15abab75c8fc
alerts active detail network-receive-error 15abab75c8fc
severity major
type "Communications Alarm"
startsAt 2021-10-26T21:17:01.913Z
source lab0200-smf-primary-1
summary "Network interface \"eno6\" showing receive errors on hostname lab0200-smf-primary-1\""
labels [ "alertname: network-receive-errors" "cluster: lab0200-smf_cee-labceed22" "component: node-exporter" "controller_revision_hash: 75c4cb979f" "device: eno6" "hostname: lab0200-smf-primary-1" "instance: 10.192.1.42:9100" "job: kubernetes-pods" "monitor: prometheus" "namespace: cee-labceed22" "pod: node-exporter-47xmm" "pod_template_generation: 1" "replica: lab0200-smf_cee-labceed22" "severity: major" ]
annotations [ "summary: Network interface \"eno6\" showing receive errors on hostname lab0200-smf-primary-1\"" "type: Communications Alarm" ]노드, 포드, 포트 상태 확인
기본 VIP의 노드 및 포드 검증
K8s Rack2의 Primary VIP에 로그인하여 소스 노드 및 Pod의 상태를 확인합니다.
이 예에서는 둘 다 상태가 양호합니다. 준비 및 실행.
cloud-user@lab0200-smf-primary-1:~$ kubectl get nodes
NAME STATUS ROLES AGE VERSION
lab0200-smf-primary-1 Ready control-plane 105d v1.21.0
lab0200-smf-primary-2 Ready control-plane 105d v1.21.0
lab0200-smf-primary-3 Ready control-plane 105d v1.21.0
lab0200-smf-worker-1 Ready <none> 105d v1.21.0
lab0200-smf-worker-2 Ready <none> 105d v1.21.0
lab0200-smf-worker-3 Ready <none> 105d v1.21.0
lab0200-smf-worker-4 Ready <none> 105d v1.21.0
lab0200-smf-worker-5 Ready <none> 105d v1.21.0
cloud-user@lab0200-smf-primary-1:~$ kubectl get pods -A -o wide | grep node-exporter--47xmm
cee-labceed22 node-exporter-47xmm 1/1 Running 0 18d 10.192.1.44 lab0200-smf-primary-1 <none> <none>
K8s 기본 VIP의 포트 검증
bd0 및 eno6 인터페이스가 ip 주소를 사용하여 작동되는지 확인 | grep eno6 및 ip 주소 | grep bd0.
cloud-user@lab0200-smf-primary-1:~$ ip addr | grep eno6
3: eno6: <BROADCAST,MULTICAST,SECONDARY,UP,LOWER_UP> mtu 1500 qdisc mq primary bd0 state UP group default qlen 1000
cloud-user@lab0200-smf-primary-1:~$ ip addr | grep bd0
2: eno5: <BROADCAST,MULTICAST,SECONDARY,UP,LOWER_UP> mtu 1500 qdisc mq primary bd0 state UP group default qlen 1000
3: eno6: <BROADCAST,MULTICAST,SECONDARY,UP,LOWER_UP> mtu 1500 qdisc mq primary bd0 state UP group default qlen 1000
12: bd0: <BROADCAST,MULTICAST,PRIMARY,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
13: vlan111@bd0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
14: vlan112@bd0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
182: cali7a166bd093d@if4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1440 qdisc noqueue state UP group default
SMI Cluster Deployer의 포트 검증
Cluster Manager VIP에 로그인한 다음 Operations (Ops) Center ops-center-smi-cluster-deployer에 대한 ssh 액세스를 제공합니다.
cloud-user@lab-deployer-cm-primary:~$ kubectl get svc -n smi-cm
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
cluster-files-offline-smi-cluster-deployer ClusterIP 10.102.53.184 <none> 8080/TCP 110d
iso-host-cluster-files-smi-cluster-deployer ClusterIP 10.102.38.70 172.16.1.102 80/TCP 110d
iso-host-ops-center-smi-cluster-deployer ClusterIP 10.102.83.54 172.16.1.102 3001/TCP 110d
netconf-ops-center-smi-cluster-deployer ClusterIP 10.102.196.125 10.241.206.65 3022/TCP,22/TCP 110d
ops-center-smi-cluster-deployer ClusterIP 10.102.12.170 <none> 8008/TCP,2024/TCP,2022/TCP,7681/TCP,3000/TCP,3001/TCP 110d
squid-proxy-node-port NodePort 10.102.72.168 <none> 3128:32572/TCP 110d
cloud-user@lab-deployer-cm-primary:~$ ssh -p 2024 admin@10.102.12.170
admin@10.102.12.170's password:
Welcome to the Cisco SMI Cluster Deployer on lab-deployer-cm-primary
Copyright © 2016-2020, Cisco Systems, Inc.
All rights reserved.
admin connected from 172.16.1.100 using ssh on ops-center-smi-cluster-deployer-5cdc5f94db-bnxqt
[lab-deployer-cm-primary] SMI Cluster Deployer#
노드의 클러스터, 노드 기본값, 인터페이스 및 매개변수 모드를 확인합니다. 이 예에서는 lab0200-smf
[lab-deployer-cm-primary] SMI Cluster Deployer# show running-config clusters
clusters lab0200-smf
environment lab0200-smf-deployer_1
…
node-defaults initial-boot netplan ethernets eno5
dhcp4 false
dhcp6 false
exit
node-defaults initial-boot netplan ethernets eno6
dhcp4 false
dhcp6 false
exit
node-defaults initial-boot netplan ethernets enp216s0f0
dhcp4 false
dhcp6 false
exit
node-defaults initial-boot netplan ethernets enp216s0f1
dhcp4 false
dhcp6 false
exit
node-defaults initial-boot netplan ethernets enp94s0f0
dhcp4 false
dhcp6 false
exit
node-defaults initial-boot netplan ethernets enp94s0f1
dhcp4 false
dhcp6 false
exit
node-defaults initial-boot netplan bonds bd0
dhcp4 false
dhcp6 false
optional true
interfaces [ eno5 eno6 ]
parameters mode active-backup
parameters mii-monitor-interval 100
parameters fail-over-mac-policy active
exit
기본 VIP에서 인터페이스 bd0 및 eno6의 오류 및/또는 삭제를 검증합니다.
두 인터페이스가 모두 삭제된 경우 UCS 또는 리프 스위치 하드웨어에 하드웨어 문제가 있는지 확인해야 합니다.
cloud-user@lab0200-smf-primary-1:~$ ifconfig bd0
bd0: flags=5187<UP,BROADCAST,RUNNING,PRIMARY,MULTICAST> mtu 1500
inet6 fe80::8e94:1fff:fef6:53cd prefixlen 64 scopeid 0x20<link>
ether 8c:94:1f:f6:53:cd txqueuelen 1000 (Ethernet)
RX packets 47035763777 bytes 19038286946282 (19.0 TB)
RX errors 49541 dropped 845484 overruns 0 frame 49541
TX packets 53797663096 bytes 32320571418654 (32.3 TB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
cloud-user@lab0200-smf-primary-1:~$ ifconfig eno6
eno6: flags=6211<UP,BROADCAST,RUNNING,SECONDARY,MULTICAST> mtu 1500
ether 8c:94:1f:f6:53:cd txqueuelen 1000 (Ethernet)
RX packets 47035402290 bytes 19038274391478 (19.0 TB)
RX errors 49541 dropped 845484 overruns 0 frame 49541
TX packets 53797735337 bytes 32320609021235 (32.3 TB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
UCS 서버 식별
SMI Cluster Deployer에서 UCS Server 검증
SMI Cluster Deployer에서 show running-config clusters <cluster name> nodes <node name>을 실행하여 UCS 서버의 CIMC IP 주소를 확인합니다.
[lab-deployer-cm-primary] SMI Cluster Deployer# show running-config clusters lab0200-smf nodes primary-1
clusters lab0200-smf
nodes primary-1
maintenance false
host-profile cp-data-r2-sysctl
k8s node-type primary
k8s ssh-ip 10.192.1.42
k8s sshd-bind-to-ssh-ip true
k8s node-ip 10.192.1.42
k8s node-labels smi.cisco.com/node-type oam
exit
k8s node-labels smi.cisco.com/node-type-1 proto
exit
ucs-server cimc user admin
...
ucs-server cimc ip-address 172.16.1.62
...
exit
Active CM을 통해 CIMC IP 주소 172.16.1.62에 SSH를 적용하고 서버 이름을 확인합니다.
이 예에서 서버 이름은 LAB0200-Server8-02입니다.
cloud-user@lab-deployer-cm-primary:~$ ssh admin@172.16.1.62
Warning: Permanently added '172.16.1.62' (RSA) to the list of known hosts.
admin@172.16.1.62's password:
LAB0200-Server8-02#
기본 VIP 포트 및 UCS 네트워크 인터페이스 매핑
기본 VIP에서 ls -la /sys/class/net 명령으로 eno6의 물리적 인터페이스 이름을 확인합니다. 이 예에서 lscpi를 사용하여 eno6 디바이스를 식별하면 포트 1d:00.1을 사용하여 eno6을 식별해야 합니다.
cloud-user@lab0200-smf-primary-1:~$ ls -la /sys/class/net
total 0
drwxr-xr-x 2 root root 0 Oct 12 06:18 .
drwxr-xr-x 87 root root 0 Oct 12 06:18 ..
lrwxrwxrwx 1 root root 0 Oct 12 06:18 bd0 -> ../../devices/virtual/net/bd0
lrwxrwxrwx 1 root root 0 Oct 12 06:18 bd1 -> ../../devices/virtual/net/bd1
…
lrwxrwxrwx 1 root root 0 Oct 12 06:18 eno5 -> ../../devices/pci0000:17/0000:17:00.0/0000:18:00.0/0000:19:01.0/0000:1b:00.0/0000:1c:00.0/0000:1d:00.0/net/eno5
lrwxrwxrwx 1 root root 0 Oct 12 06:18 eno6 -> ../../devices/pci0000:17/0000:17:00.0/0000:18:00.0/0000:19:01.0/0000:1b:00.0/0000:1c:00.0/0000:1d:00.1/net/eno6
이 예에서 포트 1d:00.1은 MLOM 및 eno6 인터페이스에 속합니다. eno5는 1d:00.0 MLOM 포트입니다.
cloud-user@lab0200-smf-primary-1:~$ lspci
……
1d:00.0 Ethernet controller: Cisco Systems Inc VIC Ethernet NIC (rev a2)
1d:00.1 Ethernet controller: Cisco Systems Inc VIC Ethernet NIC (rev a2)
3b:00.0 Ethernet controller: Intel Corporation Ethernet Controller 10G X550T (rev 01)
3b:00.1 Ethernet controller: Intel Corporation Ethernet Controller 10G X550T (rev 01)
5e:00.0 Ethernet controller: Intel Corporation Ethernet Controller XL710 for 40GbE QSFP+ (rev 02)
5e:00.1 Ethernet controller: Intel Corporation Ethernet Controller XL710 for 40GbE QSFP+ (rev 02)
d8:00.0 Ethernet controller: Intel Corporation Ethernet Controller XL710 for 40GbE QSFP+ (rev 02)
d8:00.1 Ethernet controller: Intel Corporation Ethernet Controller XL710 for 40GbE QSFP+ (rev 02)
CIMC GUI에서 Primary VIP의 ifconfig 출력에 표시된 MLOM MAC 주소와 일치합니다.
cloud-user@lab0200-smf-primary-1:~$ ifconfig bd0
bd0: flags=5187<UP,BROADCAST,RUNNING,PRIMARY,MULTICAST> mtu 1500
inet6 fe80::8e94:1fff:fef6:53cd prefixlen 64 scopeid 0x20<link>
ether 8c:94:1f:f6:53:cd txqueuelen 1000 (Ethernet)
RX packets 47035763777 bytes 19038286946282 (19.0 TB)
RX errors 49541 dropped 845484 overruns 0 frame 49541
TX packets 53797663096 bytes 32320571418654 (32.3 TB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
cloud-user@lab0200-smf-primary-1:~$ ifconfig eno6
eno6: flags=6211<UP,BROADCAST,RUNNING,SECONDARY,MULTICAST> mtu 1500
ether 8c:94:1f:f6:53:cd txqueuelen 1000 (Ethernet)
RX packets 47035402290 bytes 19038274391478 (19.0 TB)
RX errors 49541 dropped 845484 overruns 0 frame 49541
TX packets 53797735337 bytes 32320609021235 (32.3 TB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Leaf 스위치 식별
클러스터 관리자 네트워크에서 이미지에 표시된 것처럼 MLOM(eno5/eno6)은 Leaf 1과 2에 연결됩니다.
Leaves에 로그인하고 서버 이름을 grep합니다.
이 예에서 LAB0200-Server8-02 MLOM 및 MLOM 인터페이스는 Leaf1 및 Leaf2의 인터페이스 Eth1/49에 연결됩니다.
Leaf1# sh int description | inc LAB0200-Server8-02
Eth1/10 eth 40G PCIE-01-2-LAB0200-Server8-02
Eth1/30 eth 40G PCIE-02-2-LAB0200-Server8-02
Eth1/49 eth 40G LAB0200-Server8-02 MLOM-P2
Leaf2# sh int description | inc LAB0200-Server8-02
Eth1/10 eth 40G PCIE-01-1-LAB0200-Server8-02
Eth1/30 eth 40G PCIE-02-1-LAB0200-Server8-02
Eth1/49 eth 40G LAB0200-Server8-02 MLOM-P1
솔루션
시나리오에서 문제는 LAB0200-Server8-02 MLOM eno6에 연결된 Leaf1 int eth1/49의 링크 실패와 관련된 것입니다.
UCS 서버의 유효성을 검사했지만 하드웨어 문제를 찾지 못했습니다. MLOM 및 포트의 상태가 양호합니다.
Leaf1에서 TX 출력 오류가 발생했습니다.
Leaf1# sh int Eth1/49
Ethernet1/49 is up
admin state is up, Dedicated Interface
Hardware: 10000/40000/100000 Ethernet, address: e8eb.3437.48ca (bia e8eb.3437.48ca)
Description: LAB0200-Server8-02 MLOM-P2
MTU 9216 bytes, BW 40000000 Kbit , DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, medium is broadcast
Port mode is trunk
full-duplex, 40 Gb/s, media type is 40G
Beacon is turned off
Auto-Negotiation is turned on FEC mode is Auto
Input flow-control is off, output flow-control is off
Auto-mdix is turned off
Rate mode is dedicated
Switchport monitor is off
EtherType is 0x8100
EEE (efficient-ethernet) : n/a
admin fec state is auto, oper fec state is off
Last link flapped 5week(s) 6day(s)
Last clearing of "show interface" counters never
12 interface resets
Load-Interval #1: 30 seconds
30 seconds input rate 162942488 bits/sec, 26648 packets/sec
30 seconds output rate 35757024 bits/sec, 16477 packets/sec
input rate 162.94 Mbps, 26.65 Kpps; output rate 35.76 Mbps, 16.48 Kpps
Load-Interval #2: 5 minute (300 seconds)
300 seconds input rate 120872496 bits/sec, 22926 packets/sec
300 seconds output rate 54245920 bits/sec, 17880 packets/sec
input rate 120.87 Mbps, 22.93 Kpps; output rate 54.24 Mbps, 17.88 Kpps
RX
85973263325 unicast packets 6318912 multicast packets 55152 broadcast packets
85979637389 input packets 50020924423841 bytes
230406880 jumbo packets 0 storm suppression bytes
0 runts 0 giants 0 CRC 0 no buffer
0 input error 0 short frame 0 overrun 0 underrun 0 ignored
0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
0 input with dribble 0 input discard
0 Rx pause
TX
76542979816 unicast packets 88726302 multicast packets 789768 broadcast packets
76632574981 output packets 29932747104403 bytes
3089287610 jumbo packets
79095 output error 0 collision 0 deferred 0 late collision
0 lost carrier 0 no carrier 0 babble 0 output discard
0 Tx pause
"network-receive-error" 알림이 int eth1/49 Leaf1에서 케이블 교체와 함께 해결되었습니다.
마지막 인터페이스 링크 실패가 케이블 교체 직전에 보고되었습니다.
2021 Nov 17 07:36:48 TPLF0201 %BFD-5-SESSION_STATE_DOWN: BFD session 1090519112 to neighbor 10.22.101.1 on interface Vlan2201 has gone down. Reason: Control
Detection Time Expired.
2021 Nov 17 07:37:30 TPLF0201 %BFD-5-SESSION_STATE_DOWN: BFD session 1090519107 to neighbor 10.22.101.2 on interface Vlan2201 has gone down. Reason: Control
Detection Time Expired.
2021 Nov 18 05:09:12 TPLF0201 %ETHPORT-5-IF_DOWN_LINK_FAILURE: Interface Ethernet1/48 is down (Link failure)
케이블 교체 후 알림은 Labeed22의 eno6/bd0에서 지워집니다.
[lab0200-smf/labceed22] cee# show alerts active summary
NAME UID SEVERITY STARTS AT SOURCE SUMMARY
---------------------------------------------------------------------------------------------------------------------------------------------------------
watchdog a62f59201ba8 minor 11-02T05:57:18 System This is an alert meant to ensure that the entire alerting pipeline is functional. This ale...
개정 이력
| 개정 | 게시 날짜 | 의견 |
|---|---|---|
1.0 |
28-Mar-2022
|
최초 릴리스 |
피드백