|
|
Router(config)# card slot/subslot/bay 24rfchannel-spa-1 |
Wideband SPA が物理的に存在しなくても設定できるように、Wideband SPA を事前プロビジョニングします。 |
Router(config)# hw-module bay slot/subslot/bay shutdown unpowered |
指定したスロット、サブスロット、およびベイにある SPA の電源を切断します。 |
Router(config)# no hw-module bay slot/subslot/bay shutdown |
指定したスロット、サブスロット、およびベイにある SPA の電源をオンにします。 |
Router(config-controller)# rf-channel rf-port frequency freq [ annex { A | B } modulation { 64 | 256 } [ interleave-depth { 8 | 12 | 16 | 32 | 64 | 128 }]] |
Wideband SPA の周波数、Annex(MPEG フレーミング フォーマット)、変調、およびインターリーブ深度を設定します。 |
Router(config)# cable fiber-node fiber-node-id |
ファイバ ノードを設定するためのケーブル ファイバノード コンフィギュレーション モードを開始します。 |
Router(config)# cable rf-bandwidth-percent percent_value |
モジュラ ケーブル インターフェイスの帯域幅を割り当てます。 |
Router(config-if)# cable rf-channel rf_port [ bandwidth-percent bw-percent ] |
Wideband SPA の RF チャネルをワイドバンド チャネルに関連付けます。 |
Router(config)# cable wideband auto-reset |
CMTS のワイドバンド自動リセット モードをイネーブルにします。 |
Router(config)# controller modular-cable slot/subslot/bay |
コントローラ コンフィギュレーション モードを開始して、Wideband SPA コントローラを設定します。 |
Router(config-fiber-node)# description description |
ファイバ ノードの説明を指定します。 |
Router(config-fiber-node)# downstream cable slot / subslot / port |
ファイバ ノードのプライマリ ダウンストリーム チャネルを割り当てます。 |
Router(config-fiber-node)# upstream cable slot / subslot connector list-of-ports |
ファイバ ノードのアップストリーム チャネル ポートを指定します。 |
Router(config)# downstream modular-cable slot / subslot / bay rf-channel < list_of_channels > [ upstream < list_of_upstreams >] |
所定のケーブル MAC ドメインに uBR10-MC5X20 アップストリーム セットと SPA からの個別のモジュラ ダウンストリーム チャネルとの関連付けを指定します。 |
Router(config-fiber-node)# downstream modular-cable slot / subslot / bay rf-channel { rf-port | low - high } |
ファイバ ノードのワイドバンド チャネルで使用できる RF チャネルを指定します。 |
Router(config-controller)# ip-address ip-address |
Wideband SPA の FPGA の IP アドレスを設定します。 |
Router(config-controller)# modular-host subslot slot/subslot |
Wideband プロトコル オペレーションに使用されるモジュラホスト ラインカードを指定します。 |
Router(config-controller)# rf-channel rf-port [ description description ] [ frequency freq ] [ ip-address ip-address mac-address mac-address udp-port portnum ] |
Wideband SPA の RF チャネルを設定します。 |
Router(config-controller)# rf-channel rf-port cable downstream channel-id channel-id |
ダウンストリーム チャネル ID を RF チャネルに割り当てます。 |
Router# show cable mac-domain cable slot/subslot/port downstream-service-group |
プライマリ ダウンストリーム チャネルの media access control(MAC; メディア アクセス制御)Domain Downstream Service Group 情報を表示します。 |
Router# show controllers modular-cable slot/subslot/bay { brief | fpga_registers | { all | sfp [ port port_num ] | ge_phy [ port port_num ] }} |
Wideband SPA の内部状態の情報を表示します。 |
Router# show hw-module bay [ slot / subslot / bay | all] show-type { wideband-channel | rf-channel } [ device-index ] [ verbose ] |
Wideband SPA のワイドバンド チャネルまたは RF チャネルに関する情報を表示します。 |
Router# show hw-module bay { slot/subslot/bay | all } oir [ internal ] |
Wideband SPA の運用ステータスを表示します。 |
Router# show interface wideband-cable slot/subslot/bay : wb-channel |
ワイドバンド チャネル ケーブル インターフェイスに関する情報を表示します。 |