未使用の物理ドライブからの仮想ドライブの作成
始める前に
このタスクを実行するには、admin 権限を持つユーザとしてログインする必要があります。
手順
コマンドまたはアクション | 目的 | |
---|---|---|
ステップ 1 |
Server # scope chassis |
シャーシ コマンド モードを開始します。 |
ステップ 2 |
Server /chassis # scope server {1 | 2} |
サーバ 1 または 2 のサーバ コマンド モードを開始します。 |
ステップ 3 |
Server /chassis/server # scope storageadapter Slot-ID |
ストレージ アダプタ コマンド モードを開始します。 |
ステップ 4 |
Server /chassis/server/storageadapter # create virtual-drive |
この時点で、RAID レベル、使用する物理ドライブ、新しい仮想ドライブのサイズと書き込みポリシーに関する情報の入力を求めるプロンプトが表示されます。プロンプトごとに適切な情報を入力します。 仮想ドライブの情報の指定が完了したら、情報が正しいことの確認を求めるプロンプトが表示されます。確認をする場合は y (yes) を入力し、操作をキャンセルする場合は n (no) を入力します。 |
ステップ 5 |
Server /chassis/storageadapter # show virtual-drive |
既存の仮想ドライブが表示されます。 |
例
次に、2 台の未使用の物理ドライブにまたがる新しい仮想ドライブの作成方法を示します。
Server # scope chassis
Server /chassis # scope server 1
Server /chassis/server # scope storageadapter SLOT-3
Server /chassis/server/storageadapter # create-virtual-drive
Please enter RAID level
0, 1, 5, 10, 50 --> 1
Please choose from the following 10 unused physical drives:
ID Size(MB) Model Interface Type
1 571776 SEAGATE SAS HDD
2 571776 SEAGATE SAS HDD
4 571776 SEAGATE SAS HDD
5 428672 SEAGATE SAS HDD
6 571776 SEAGATE SAS HDD
7 571776 SEAGATE SAS HDD
8 571776 SEAGATE SAS HDD
9 428672 SEAGATE SAS HDD
10 571776 SEAGATE SAS HDD
11 953344 SEAGATE SAS HDD
Specify physical disks for span 0:
Enter comma-separated PDs from above list--> 1,2
Please enter Virtual Drive name (15 characters maximum)--> test_v_drive
Please enter Virtual Drive size in MB, GB, or TB
Example format: '400 GB' --> 10 GB
Optional attribute:
stripsize: defaults to 64K Bytes
0: 8K Bytes
1: 16K Bytes
2: 32K Bytes
3: 64K Bytes
4: 128K Bytes
5: 256K Bytes
6: 512K Bytes
7: 1024K Bytes
Choose number from above options or hit return to pick default--> 2
stripsize will be set to 32K Bytes (6 and 'strip-size\:32k')
Disk Cache Policy: defaults to Unchanged
0: Unchanged
1: Enabled
2: Disabled
Choose number from above options or hit return to pick default--> 0
Disk Cache Policy will be set to Unchanged (0 and 'disk-cache-policy\:unchanged' )
Read Policy: defaults to No Read Ahead
0: No Read Ahead
1: Always
Choose number from above options or hit return to pick default--> 0
Read Policy will be set to No Read Ahead (0 and 'read-policy\:no-read-ahead')
Write Policy: defaults to Write Through
0: Write Through
1: Write Back Good BBU
2: Always Write Back
Choose number from above options or hit return to pick default--> 0
Write Policy will be set to Write Through (0 and 'write-policy\:write-through')
IO Policy: defaults to Direct I/O
0: Direct I/O
1: Cached I/O
Choose number from above options or hit return to pick default--> 0
IO Policy will be set to Direct I/O (0 and 'io-policy\:direct-io')
Access Policy: defaults to Read Write
0: Read Write
1: Read Only
2: Blocked
Choose number from above options or hit return to pick default--> 0
Access Policy will be set to Read Write (0 and 'access-policy\:read-write')
New virtual drive will have the following characteristics:
- Spans: '[1.2]'
- RAID level: '1'
- Name: 'test_v_drive'
- Size: 10 GB
- stripsize: 32K Bytes
- Disk Cache Policy: Unchanged
- Read Policy: No Read Ahead
- Write Policy: Write Through
- IO Policy: Direct I/O
- Access Policy: Read Write
OK? (y or n)--> y
Server /chassis/server/storageadapter # show virtual-drive
Virtual Drive Health Status Name Size RAID Level Boot Drive
------------- -------------- -------------------- ---------------- ---------- ---------- ----------
0 Good Optimal 150528 MB RAID 0 false
1 Good Optimal 20480 MB RAID 0 true
2 Good Optimal 114140 MB RAID 0 false
3 Good Optimal test_v_drive 10000 MB RAID 1 false
4 Good Optimal new_from_test 500 MB RAID 1 false
Server /chassis/storageadapter #