この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
この章の内容は、次のとおりです。
vCenter 拡張キーは、次のような場合に修正できます。
Cisco UCS Manager から vCenter 拡張ファイルをエクスポートします。
使用している VMware vCenter のバージョンによって、1 つの拡張ファイルまたは 9 つの拡張ファイルの集合を生成できます。
VMware vCenter に vCenter 拡張ファイルを登録します。
コマンドまたはアクション | 目的 | |
---|---|---|
ステップ 1 | UCS-A# connect local-mgmt | ローカル管理モードを開始します。 |
ステップ 2 | UCS-A(local-mgmt)# copy from-filesystem: from-path filename to-filesystem: to-path filename | コピー元からコピー先まで証明書をコピーします。 from-filesystem: 引数には、次のいずれかの構文を使用します。
to-filesystem: 引数には、次のいずれかの構文を使用します。 |
次に、FTP を使用して証明書(certificate.txt)をワークスペースの temp フォルダにコピーする方法を示します。
UCS-A # connect local-mgmt Cisco UCS 6100 Series Fabric Interconnect TAC support: http://www.cisco.com/tac Copyright (c) 2009, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained herein are owned by other third parties and are used and distributed under license. Some parts of this software may be covered under the GNU Public License or the GNU Lesser General Public License. A copy of each such license is available at http://www.gnu.org/licenses/gpl.html and http://www.gnu.org/licenses/lgpl.html UCS-A(local-mgmt)# copy ftp://192.168.10.10/certs/certificate.txt workspace:/temp/certificate.txt UCS-A(local-mgmt)#
VM-FEX の証明書を作成します。
VMware vCenter では、vCenter 拡張ファイルはプラグインと呼ばれます。
Cisco UCS Manager から vCenter 拡張ファイルをエクスポートします。 エクスポートされた vCenter 拡張ファイルは、VMware vCenter からアクセス可能な場所に保存されるようにしてください。
ステップ 1 | VMware vCenter で、 を選択します。 |
ステップ 2 | [Plug-in Manager] ダイアログボックスで、[Available Plug-ins] セクションの下の空いているスペースを右クリックし、[New Plug-in] をクリックします。 |
ステップ 3 | [Browse] をクリックし、vCenter 拡張ファイルが保存されている場所に移動します。 |
ステップ 4 | vCenter 拡張ファイルをクリックし、[Open] をクリックします。 |
ステップ 5 | [Register Plug-in] をクリックします。 |
ステップ 6 | [Security Warning] ダイアログボックスが表示されたら、[Ignore] をクリックします。 |
ステップ 7 |
[OK] をクリックします。 vCenter 拡張ファイルが、使用可能な VMware vCenter プラグインとして登録されます。 プラグインをインストールする必要はありません。代わりに、使用可能な状態のままにしておきます。 複数の vCenter 拡張ファイルを登録している場合は、すべてのファイルが登録されるまでこの手順を繰り返します。 |
コマンドまたはアクション | 目的 | |
---|---|---|
ステップ 1 | UCS-A# scope system | システム モードを開始します。 |
ステップ 2 | UCS-A /system # scope vm-mgmt | システム Virtual Machine(VM; 仮想マシン)管理モードを開始します。 |
ステップ 3 | UCS-A /system/vm-mgmt # scope vmware | システム VM 管理 VMware モードを開始します。 |
ステップ 4 | UCS-A /system/vm-mgmt /vmware # scope cert-store | システム VM 管理 VMware 証明書ストア モードを開始します。 |
ステップ 5 | UCS-A /system/vm-mgmt /vmware/cert-store # create certificate certificate-name | VM-FEX for VMware に指定された証明書を作成し、システム VM 管理 VMware 証明書ストア証明書モードを開始します。 |
ステップ 6 | UCS-A /system/vm-mgmt /vmware/cert-store/certificate # set location {volatile | workspace} path path certfile file-name | VM-FEX for VMware の証明書として使用する既存の証明書の場所とファイル名を指定します。 |
ステップ 7 | UCS-A /system/vm-mgmt /vmware/cert-store/certificate # commit-buffer | トランザクションをシステムの設定にコミットします。 |
次に、VM-FEX for VMware の証明書を作成して、トランザクションをコミットする例を示します。
UCS-A# scope system UCS-A /system # scope vm-mgmt UCS-A /system/vm-mgmt # scope vmware UCS-A /system/vm-mgmt/vmware # scope cert-store UCS-A /system/vm-mgmt/vmware/cert-store # create certificate VnLinkCertificate UCS-A /system/vm-mgmt/vmware/cert-store/certificate* # set location workspace path /temp certfile certificate.txt UCS-A /system/vm-mgmt/vmware/cert-store/certificate* # commit-buffer UCS-A /system/vm-mgmt/vmware/cert-store/certificate #
コマンドまたはアクション | 目的 | |
---|---|---|
ステップ 1 | UCS-A# scope system | システム モードを開始します。 |
ステップ 2 | UCS-A /system # scope vm-mgmt | システム Virtual Machine(VM; 仮想マシン)管理モードを開始します。 |
ステップ 3 | UCS-A /system/vm-mgmt # scope vmware | システム VM 管理 VMware モードを開始します。 |
ステップ 4 | UCS-A /system/vm-mgmt /vmware # scope cert-store | システム VM 管理 VMware 証明書ストア モードを開始します。 |
ステップ 5 | UCS-A /system/vm-mgmt /vmware/cert-store # delete certificate certificate-name | VM-FEX for VMware の指定した証明書を削除します。 |
ステップ 6 | UCS-A /system/vm-mgmt /vmware/cert-store # commit-buffer | トランザクションをシステムの設定にコミットします。 |
次に、VM-FEX for VMware の証明書を削除して、トランザクションをコミットする例を示します。
UCS-A# scope system UCS-A /system # scope vm-mgmt UCS-A /system/vm-mgmt # scope vmware UCS-A /system/vm-mgmt/vmware # scope cert-store UCS-A /system/vm-mgmt/vmware/cert-store # delete certificate VnLinkCertificate UCS-A /system/vm-mgmt/vmware/cert-store* # commit-buffer UCS-A /system/vm-mgmt/vmware/cert-store #