The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
VTEP1# show nve peers
Interface VNI Type Peer-IP RMAC/Num_RTs eVNI state flags UP time
nve10 5000 L3CP 10.2.2.20 380e.4d9b.6a4a 5000 UP A/M/4 00:38:37
nve10 5000 L3CP 10.2.2.20 380e.4d9b.6a4a 5000 UP A/-/6 00:03:16
VTEP 2
次に、VTEP 2 での show nve peers コマンドの出力例を示します。
VTEP2# show nve peers
Interface VNI Type Peer-IP RMAC/Num_RTs eVNI state flags UP time
nve10 5000 L3CP 10.1.1.10 a0f8.4910.bce2 5000 UP A/-/4 00:38:53
nve10 5000 L3CP 10.1.1.10 a0f8.4910.bce2 5000 UP A/M/6 00:38:53
show bgp l2vpn evpn all
VTEP 1
次に、VTEP 1 での show bgp l2vpn evpn all all コマンドの出力例を示します。
VTEP1# show bgp l2vpn evpn all
BGP table version is 26, local router ID is 10.1.1.10
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,
x best-external, a additional-path, c RIB-compressed,
t secondary path, L long-lived-stale,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
Route Distinguisher: 103:2 (default for vrf green)
*> [5][103:2][0][24][10.1.13.0]/17
0.0.0.0 0 32768 ?
*> [5][103:2][0][24][192.168.1.0]/17
0.0.0.0 0 32768 ?
*> [5][103:2][0][64][2001:DB8:201::]/29
:: 0 32768 ?
Route Distinguisher: 104:2
*>i [5][104:2][0][24][10.1.14.0]/17
10.2.2.20 0 100 0 ?
*>i [5][104:2][0][24][192.168.2.0]/17
10.2.2.20 0 100 0 ?
*>i [5][104:2][0][64][2001:DB8:202::]/29
10.2.2.20 0 100 0 ?
VTEP 2
次に、VTEP 2 での show bgp l2vpn evpn all コマンドの出力例を示します。
VTEP2# show bgp l2vpn evpn all
BGP table version is 12, local router ID is 10.2.2.20
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,
x best-external, a additional-path, c RIB-compressed,
t secondary path, L long-lived-stale,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
Route Distinguisher: 103:2
*>i [5][103:2][0][24][10.1.13.0]/17
10.1.1.10 0 100 0 ?
*>i [5][103:2][0][24][192.168.1.0]/17
10.1.1.10 0 100 0 ?
*>i [5][103:2][0][64][2001:DB8:201::]/29
10.1.1.10 0 100 0 ?
Route Distinguisher: 104:2 (default for vrf green)
*> [5][104:2][0][24][10.1.14.0]/17
0.0.0.0 0 32768 ?
*> [5][104:2][0][24][192.168.2.0]/17
0.0.0.0 0 32768 ?
*> [5][104:2][0][64][2001:DB8:202::]/29
Network Next Hop Metric LocPrf Weight Path
:: 0 32768 ?
show ip route vrf
VTEP 1
次に、VTEP 1 での show ip route vrf コマンドの出力例を示します。
VTEP1# show ip route vrf green
Routing Table: green
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, m - OMP
n - NAT, Ni - NAT inside, No - NAT outside, Nd - NAT DIA
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
H - NHRP, G - NHRP registered, g - NHRP registration summary
o - ODR, P - periodic downloaded static route, l - LISP
a - application route
+ - replicated route, % - next hop override, p - overrides from PfR
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 3 subnets, 2 masks
C 10.1.13.0/24 is directly connected, Loopback13
L 10.1.13.13/32 is directly connected, Loopback13
B 10.1.14.0/24 [200/0] via 10.2.2.20, 00:42:01, Vlan200
192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.1.0/24 is directly connected, Vlan201
L 192.168.1.201/32 is directly connected, Vlan201
B 192.168.2.0/24 [200/0] via 10.2.2.20, 00:06:00, Vlan200
VTEP 2
次に、VTEP 2 での show ip route vrf コマンドの出力例を示します。
VTEP2# show ip route vrf green
Routing Table: green
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, m - OMP
n - NAT, Ni - NAT inside, No - NAT outside, Nd - NAT DIA
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
H - NHRP, G - NHRP registered, g - NHRP registration summary
o - ODR, P - periodic downloaded static route, l - LISP
a - application route
+ - replicated route, % - next hop override, p - overrides from PfR
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 3 subnets, 2 masks
B 10.1.13.0/24 [200/0] via 10.1.1.10, 00:42:38, Vlan200
C 10.1.14.0/24 is directly connected, Loopback14
L 10.1.14.14/32 is directly connected, Loopback14
B 192.168.1.0/24 [200/0] via 10.1.1.10, 00:42:38, Vlan200
192.168.2.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.2.0/24 is directly connected, Vlan202
L 192.168.2.202/32 is directly connected, Vlan202
show platform software fed switch active matm mactable vlan
VTEP 1
次に、VTEP 1 での show platform software fed switch active matm mactable vlan 200 コマンドの出力例を示します。
(注)
ピアのコア SVI インターフェイスの MAC アドレスがコア VLAN に存在する必要があります。
VTEP1# show platform software fed switch active matm macTable vlan 200
VLAN MAC Type Seq# EC_Bi Flags machandle siHandle riHandle diHandle *a_time *e_time ports
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
200 a0f8.4910.bce2 0x8002 0 19880 64 0x7f5d8503fd48 0x7f5d852b6d28 0x0 0x5234 0 0 Vlan200
200 380e.4d9b.6a4a 0x1000001 0 0 64 0x7f5d85117598 0x7f5d85110f78 0x7f5d851b9648 0x0 0 0 RLOC 10.2.2.20 adj_id 22
Total Mac number of addresses:: 2
VTEP 2
次に、VTEP 2 での show platform software fed switch active matm mactable vlan 200 コマンドの出力例を示します。
(注)
ピアのコア SVI インターフェイスの MAC アドレスがコア VLAN に存在する必要があります。
VTEP2# show platform software fed switch active matm macTable vlan 200
VLAN MAC Type Seq# EC_Bi Flags machandle siHandle riHandle diHandle *a_time *e_time ports
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
200 380e.4d9b.6a4a 0x8002 0 42949 64 0x7f40e15fd308 0x7f40e15f49d8 0x0 0x0 0 0 Vlan200
200 a0f8.4910.bce2 0x1000001 0 0 64 0x7f40e193c478 0x7f40e1938168 0x7f40e1937bf8 0x0 0 0 RLOC 10.1.1.10 adj_id 86
Total Mac number of addresses:: 2
EVPN VXLAN レイヤ 3 オーバーレイネットワークの確認
次の表に、レイヤ 3 VXLAN オーバーレイネットワークの確認に使用する show コマンドを示します。