この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
この章は、次の内容で構成されています。
アップグレード前のリリース | 次のセクションの手順を実行 |
---|---|
Cisco VSG リリース 5.2(1)VSG1(4.1) からリリース 5.2(1)VSG2(1.1b) および Cisco VNMC リリース 2.1 から Cisco Prime NSCリリース 3.2 |
Cisco VSG リリース 5.2(1)VSG1(4.1) からリリース 5.2(1)VSG2(1.1b) および Cisco VNMC 2.1 から Cisco Prime NSCリリース 3.2 へのアップグレード手順。 これには、Cisco Nexus 1000V リリース 5.2(1)SM1(5.1) からリリース 5.2(1)SM1(5.2b) へのアップグレード手順も含まれます。 |
Cisco VSG リリース 5.2(1)VSG2(1.1a) からリリース 5.2(1)VSG2(1.1b) |
リリース 5.2(1)VSG2(1.1a) からリリース 5.2(1)VSG2(1.1b) へのCisco VSGアップグレード手順 これには、Cisco Nexux 1000V リリース 5.2(1)SM1(5.2) または 5.2(1)SM1(5.2a) からリリース 5.2(1)SM1(5.2b) へのアップグレード手順が含まれます。 |
![]() (注) |
Cisco VSG と Cisco Prime NSC は、指定の順序でアップグレードすることを強くお勧めします。 指定の順序に従わなければ、接続とデータ通信に障害が起こるおそれがあります。 Cisco Prime NSC は、正しいポリシー エージェント(PA)を使用してアップグレードする必要があります。 |
Cisco Prime NSC ソフトウェアをアップグレードすると、すべての現行の CLI(コマンドライン インターフェイス)および GUI(グラフィカル ユーザ インターフェイス)セッションは中断されます。そのため、CLI または GUI セッションを再起動する必要があります。
スタンドアロンの Cisco VSG のアップグレード手順は hitful なので、新しいイメージを有効にするには Cisco VSG を手動でリロードする必要があります。 HA モードではアップグレードは hitless なので、スタンバイの Cisco VSG が先にアップグレードされ、スイッチオーバーの後に、以前にアクティブだった Cisco VSG がアップグレードされます。
ライセンス情報は Cisco VSG に保存されず、Virtual Supervisor Module(VSM; 仮想スーパーバイザ モジュール)と Virtual Ethernet Module(VEM; 仮想イーサネット モジュール)間に保持されるため、Cisco VSG でパケットが受理されるとライセンスは有効であることを意味し、パケットが処理されます。
アップグレードにより、2 つのバイナリ ファイル(キックスタート ファイルとシステム ファイル)が影響を受けます。
アップグレードを行い、Cisco VSG がオンラインになっても既存の情報は消去されません。 Cisco VSG はステートレスなので、すべての情報はブートアップ時に Cisco Prime NSC から取得されます。
Cisco VSG と Cisco Prime NSC は、指定の順序でアップグレードすることを強くお勧めします。 指定の順序に従わなければ、接続とデータ通信に障害が起こるおそれがあります。 Cisco Prime NSC は、正しいポリシー エージェント(PA)を使用してアップグレードする必要があります。
VSG ユニバーサル ライセンス(UL)を使用して新しい VSG バージョンにアップグレードする前に、VSM モードを拡張モードに変更し、設定を保存したことを確認します。 VSM モードを拡張モードに変更しないで UL を使用して VSG をインストールすると、VSG サービスに障害を発生させることがあります。
アップグレード手順を行う前に、元の Cisco Prime NSC および VSM のスナップショットまたはバックアップ(クローン)を作成してから、VSM および Cisco VSG で ISSU アップグレードを実行することをお勧めします。 手動アップグレードはお勧めしません。
EXEC モードで CLI にログインしていること。
新しいソフトウェア ファイルをリモート サーバにバックアップし、そのソフトウェア ファイルがリモート サーバに作成されたことを確認していること。
Cisco Prime NSC リリース 3.0.2 をダウンロードしていること。
VNMC VM に 2 台のハード ディスクを追加していること。 Cisco Prime NSC 要件の詳細については、システム要件 を参照してください。
1. nsc# connect local-mgmt
2. (任意) nsc (local-mgmt)# show version
3. (任意) nsc (local-mgmt)# copy scp://user@example-server-ip/example-dir/filename bootflash:/
4. nsc (local-mgmt)# dir bootflash:/
5. nsc (local-mgmt)# update bootflash:/filename
6. (任意) nsc (local-mgmt)# service status
7. (任意) nsc (local-mgmt)# show version
次の例は、ローカル管理モードに接続する方法を示しています。
nsc# connect local-mgmt Cisco Prime Network Services Controller TAC support: http://www.cisco.com/tac Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained in this software are owned by other third parties and used and distributed under license. Certain components of this software are licensed under the GNU General Public License (GPL) version 2.0 or the GNU Lesser General Public License (LGPL) Version 2.1. A copy of each such license is available at http://www.opensource.org/licenses/gpl-2.0.php and http://www.opensource.org/licenses/lgpl-2.1.php
次の例は、Cisco VNMC のバージョン情報を表示する方法を示しています。
nsc(local-mgmt)# show version Name Package Version GUI ---- ------- ------- ---- core Base System 2.1 2.1 service-reg Service Registry 2.1 2.1 policy-mgr Policy Manager 2.1 2.1 resource-mgr Resource Manager 2.1 2.1 vm-mgr VM manager 2.1 none
次の例は、Cisco Prime NSC ソフトウェアを VM にコピーする方法を示しています。
nsc(local-mgmt)# copy scp://<user@example-server-ip>/example1-dir/nsc.3.0.2e.bin bootflash:/ Enter password: 100% 143MB 11.9MB/s 00:12
次の例は、Cisco Prime NSC のディレクトリ情報を表示する方法を示しています。
nsc(local-mgmt)# dir bootflash:/ 1.1G Oct 14 00:57 nsc.3.0.2e.bin Usage for bootflash:// 6359716 KB used 10889320 KB free 18187836 KB total
次の例は、Cisco Prime NSC の更新を開始する方法を示しています。
nsc(local-mgmt)# update bootflash:/nsc.3.0.2e.bin It is recommended that you perform a full-state backup before updating any VNMC component. Press enter to continue or Ctrl-c to exit.
次の例は、Cisco Prime NSC の更新後のバージョンを表示する方法を示しています。
nsc(local-mgmt)# show version Name Package Version GUI ---- ------- ------- ---- core Base System 3.0(2e) 3.0(2e) service-reg Service Registry 3.0(2e) 3.0(2e) policy-mgr Policy Manager 3.0(2e) 3.0(2e) resource-mgr Resource Manager 3.0(2e) 3.0(2e) vm-mgr VM manager 3.0(2e) none cloudprovider-mgr Cloud Provider Mgr 3.0(2e) none
EXEC モードで CLI にログインしていること。
新しいソフトウェア ファイルをリモート サーバにバックアップし、そのソフトウェア ファイルがリモート サーバに作成されたことを確認していること。
Cisco Prime NSC リリース 3.2 がダウンロードされていること。
2 台のハード ディスクを Cisco Prime NSC VM に追加していること。 Cisco Prime NSC の要件の詳細については、システム要件 を参照してください。
1. nsc# connect local-mgmt
2. (任意) nsc (local-mgmt)# show version
3. (任意) nsc (local-mgmt)# copy scp://user@example-server-ip/example-dir/filename bootflash:/
4. nsc (local-mgmt)# dir bootflash:/
5. nsc (local-mgmt)# update bootflash:/filename
6. (任意) nsc (local-mgmt)# service status
7. (任意) nsc (local-mgmt)# show version
コマンドまたはアクション | 目的 | |||
---|---|---|---|---|
ステップ 1 | nsc# connect local-mgmt | ローカル管理モードを開始します。 |
||
ステップ 2 | nsc (local-mgmt)# show version | (任意) Cisco Prime NSC ソフトウェアのバージョン情報を表示します。 |
||
ステップ 3 | nsc (local-mgmt)# copy scp://user@example-server-ip/example-dir/filename bootflash:/ | (任意) Cisco Prime NSC ソフトウェア ファイルを VM にコピーします。 |
||
ステップ 4 | nsc (local-mgmt)# dir bootflash:/ | 目的のファイルがディレクトリにコピーされたことを確認します。 |
||
ステップ 5 | nsc (local-mgmt)# update bootflash:/filename | Cisco Prime NSC ソフトウェアの更新を開始します。 |
||
ステップ 6 | nsc (local-mgmt)# service status | (任意) サーバが予期したとおりに動作していることを確認できます。 |
||
ステップ 7 | nsc (local-mgmt)# show version | (任意) Cisco Prime NSC ソフトウェア バージョンが更新されていることを確認できます。
|
次の例は、ローカル管理モードに接続する方法を示しています。
nsc# connect local-mgmt Cisco Prime Network Services Controller TAC support: http://www.cisco.com/tac Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained in this software are owned by other third parties and used and distributed under license. Certain components of this software are licensed under the GNU General Public License (GPL) version 2.0 or the GNU Lesser General Public License (LGPL) Version 2.1. A copy of each such license is available at http://www.opensource.org/licenses/gpl-2.0.php and http://www.opensource.org/licenses/lgpl-2.1.php
次の例は、Cisco Prime NSC のバージョン情報を表示する方法を示しています。
nsc(local-mgmt)# show version Name Package Version GUI ---- ------- ------- ---- core Base System 3.0(2e) 3.0(2e) service-reg Service Registry 3.0(2e) 3.0(2e) policy-mgr Policy Manager 3.0(2e) 3.0(2e) resource-mgr Resource Manager 3.0(2e) 3.0(2e) vm-mgr VM manager 3.0(2e) none cloudprovider-mgr Cloud Provider Mgr 3.0(2e) none
次の例は、Cisco Prime NSC ソフトウェアを VM にコピーする方法を示しています。
nsc(local-mgmt)# copy scp://<user@example-server-ip>/example1-dir/nsc.3.2.bin bootflash:/ Enter password: 100% 143MB 11.9MB/s 00:12
次の例は、Cisco Prime NSC のディレクトリ情報を表示する方法を示しています。
nsc(local-mgmt)# dir bootflash:/ 1.1G Oct 14 00:57 nsc.3.2.bin Usage for bootflash:// 6359716 KB used 10889320 KB free 18187836 KB total
次の例は、Cisco Prime NSC の更新を開始する方法を示しています。
nsc(local-mgmt)# update bootflash:/nsc.3.2.bin It is recommended that you perform a full-state backup before updating any VNMC component. Press enter to continue or Ctrl-c to exit.
次の例は、Cisco Prime NSC の更新後のバージョンを表示する方法を示しています。
nsc(local-mgmt)# show version Name Package Version GUI ---- ------- ------- ---- core Base System 3.2 3.2 service-reg Service Registry 3.2 3.2 policy-mgr Policy Manager 3.2 3.2 resource-mgr Resource Manager 3.2 3.2 vm-mgr VM manager 3.2 none cloudprovider-mgr Cloud Provider Mgr 3.2 none
VSG をアップグレードする際は、VSG のアップグレードの注意事項に従ってください。
ネットワークが安定しているときに、アップグレードをスケジュールします。 アップグレード中はスイッチの設定を行わないでください。
アップグレード イメージのコピーに利用できる十分な容量を確保してください。 アクティブ VSG とスタンバイ VSG の両方に、最小 200 MB のブートフラッシュの空き領域が必要です。
インストール手順の実行中に VSG を稼働しているホストへの電力供給が中断されることがないようにします。
VSG の管理(mgmt0)インターフェイスが動作しており、アクセス可能であることを確認します。
指定したシステム イメージとキックスタート イメージに互いに互換性があることを確認します。
ping コマンドを使用して、リモート サーバへの接続を確認します。
ハイ アベイラビリティ(HA)モードで VSG ペアをアップグレードできます。
1. アクティブ VSG にログインします。
2. 現在のブート変数を表示します。
3. イメージ ファイルをコピーするのに十分な空き容量があるかを確認します。 新しい VSG イメージをコピーするために十分な空き容量を増やす必要がある場合は、不要なファイルを削除します。
4. スタンバイ VSG に利用可能な必要容量があることを確認します。 新しい VSG イメージをコピーするために十分な空き容量を増やす必要がある場合は、不要なファイルを削除します。
5. Cisco Nexus 1000V キックスタート ファイル、およびシステム ソフトウェア ファイルをサーバにコピーします。
6. 現在のブート変数を削除します。
7. 現在のブート変数を表示します。
8. 新しいブート変数をロードし、実行中のコンフィギュレーションをスタートアップ コンフィギュレーションにコピーします。
9. 手動でシステムを再起動します。
10. インストール処理が完了したらログインし、スイッチがアップグレードされたソフトウェア バージョンを実行していることを確認します。
ステップ 1 | アクティブ VSG にログインします。 | ||
ステップ 2 |
現在のブート変数を表示します。 vsg# show boot Current Boot Variables: sup-1 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin sup-2 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin No module boot variable set Boot Variables on next reload: sup-1 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin sup-2 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin No module boot variable set |
||
ステップ 3 |
イメージ ファイルをコピーするのに十分な空き容量があるかを確認します。 新しい VSG イメージをコピーするために十分な空き容量を増やす必要がある場合は、不要なファイルを削除します。 vsg(config)# dir . . . Usage for bootflash:// 692117504 bytes used 5711851520 bytes free 6403969024 bytes total |
||
ステップ 4 |
スタンバイ VSG に利用可能な必要容量があることを確認します。 新しい VSG イメージをコピーするために十分な空き容量を増やす必要がある場合は、不要なファイルを削除します。 vsg(config)# dir bootflash://sup-standby/ . . . Usage for bootflash://sup-standby 577372160 bytes used 5826600960 bytes free 6403973120 bytes total |
||
ステップ 5 |
Cisco Nexus 1000V キックスタート ファイル、およびシステム ソフトウェア ファイルをサーバにコピーします。 vsg(config)# copy scp://user@scpserver.cisco.com/downloads/nexus-1000v-kickstart.5.2.1.VSG2.1.1b.bin ./ vsg(config)#copy scp://user@scpserver.cisco.com/downloads/nexus-1000v.5.2.1.VSG2.1.1b.bin ./ |
||
ステップ 6 |
現在のブート変数を削除します。 vsg(config)# no boot system vsg(config)# no boot kickstart |
||
ステップ 7 |
現在のブート変数を表示します。 vsg(config)# show boot Current Boot Variables: sup-1 kickstart variable not set system variable not set sup-2 kickstart variable not set system variable not set No module boot variable set Boot Variables on next reload: sup-1 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin sup-2 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin No module boot variable set |
||
ステップ 8 |
新しいブート変数をロードし、実行中のコンフィギュレーションをスタートアップ コンフィギュレーションにコピーします。 vsg# configure terminal vsg(config)# boot system bootflash:///nexus-1000v.5.2.1.VSG2.1.1b.bin vsg(config)# boot kickstart bootflash:///nexus-1000v-kickstart.5.2.1.VSG2.1.1b.bin vsg(config)# copy running-config startup-config |
||
ステップ 9 |
手動でシステムを再起動します。 vsg(config)# reload This command will reboot the system. (y/n)? [n] If you want to continue with the reboot, press Y.
|
||
ステップ 10 |
インストール処理が完了したらログインし、スイッチがアップグレードされたソフトウェア バージョンを実行していることを確認します。
switch# show version Cisco Nexus Operating System (NX-OS) Software TAC support: http://www.cisco.com/tac Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained herein are owned by other third parties and are used and distributed under license. Some parts of this software are covered under the GNU Public License. A copy of the license is available at http://www.gnu.org/licenses/gpl.html. Software loader: version unavailable [last: image booted through mgmt0] kickstart: version 5.2(1)VSG2(1.1b) system: version 5.2(1)VSG2(1.1b) system image file is: bootflash:///nexus-1000v.5.2.1.VSG2.1.1b.bin system compile time: 12/6/2013 16:00:00 [12/06/2013 21:10:51] Hardware cisco Nexus 1000V Chassis ("Virtual Supervisor Module") Intel(R) Xeon(R) CPU E5-2609 with 1933768 kB of memory. Processor Board ID T155D4BC001 Device name: VSG_Fire bootflash: 1451180 kB Kernel uptime is 1 day(s), 16 hour(s), 30 minute(s), 38 second(s) plugin Core Plugin, Ethernet Plugin, Virtualization Plugin vsg # |
1. アクティブ VSG にログインします。
2. show boot コマンドを使用して、現在のブート変数を表示します。
3. イメージ ファイルをコピーするのに十分な空き容量があるかを確認します。 新しい VSG イメージをコピーするために十分な空き容量を増やす必要がある場合は、不要なファイルを削除します。
4. Cisco Nexus 1000V キックスタート ファイル、およびシステム ソフトウェア ファイルをサーバにコピーします。
5. 現在のブート変数を削除します。
6. 現在のブート変数を表示します。
7. 新しいブート変数をロードし、実行中のコンフィギュレーションをスタートアップ コンフィギュレーションにコピーします。
8. 手動でシステムを再起動します。
9. インストール処理が完了したらログインし、スイッチがアップグレードされたソフトウェア バージョンを実行していることを確認します。
ステップ 1 | アクティブ VSG にログインします。 | ||
ステップ 2 |
show boot コマンドを使用して、現在のブート変数を表示します。 vsg# show boot Current Boot Variables: sup-1 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin sup-2 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin No module boot variable set Boot Variables on next reload: sup-1 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin sup-2 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin No module boot variable set |
||
ステップ 3 |
イメージ ファイルをコピーするのに十分な空き容量があるかを確認します。 新しい VSG イメージをコピーするために十分な空き容量を増やす必要がある場合は、不要なファイルを削除します。 vsg(config)# dir . . . Usage for bootflash:// 692117504 bytes used 5711851520 bytes free 6403969024 bytes total |
||
ステップ 4 |
Cisco Nexus 1000V キックスタート ファイル、およびシステム ソフトウェア ファイルをサーバにコピーします。 vsg(config)# copy scp://user@scpserver.cisco.com/downloads/nexus-1000v-kickstart.5.2.1.VSG2.1.1b.bin ./ |
||
ステップ 5 |
現在のブート変数を削除します。 vsg(config)# no boot system vsg(config)# no boot kickstart |
||
ステップ 6 |
現在のブート変数を表示します。 vsg(config)# show boot Current Boot Variables: sup-1 kickstart variable not set system variable not set sup-2 kickstart variable not set system variable not set No module boot variable set Boot Variables on next reload: sup-1 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin sup-2 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin No module boot variable set |
||
ステップ 7 |
新しいブート変数をロードし、実行中のコンフィギュレーションをスタートアップ コンフィギュレーションにコピーします。 vsg# configure terminal vsg(config)# boot system bootflash:///nexus-1000v.5.2.1.VSG2.1.1b.bin vsg(config)# boot kickstart bootflash:///nexus-1000v-kickstart.5.2.1.VSG2.1.1b.bin vsg(config)# copy running-config startup-config |
||
ステップ 8 |
手動でシステムを再起動します。 vsg(config)# reload This command will reboot the system. (y/n)? [n] If you want to continue with the reboot, press Y.
|
||
ステップ 9 |
インストール処理が完了したらログインし、スイッチがアップグレードされたソフトウェア バージョンを実行していることを確認します。
switch# show version Cisco Nexus Operating System (NX-OS) Software TAC support: http://www.cisco.com/tac Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained herein are owned by other third parties and are used and distributed under license. Some parts of this software are covered under the GNU Public License. A copy of the license is available at http://www.gnu.org/licenses/gpl.html. Software loader: version unavailable [last: image booted through mgmt0] kickstart: version 5.2(1)VSG2(1.1b) system: version 5.2(1)VSG2(1.1b) system image file is: bootflash:///nexus-1000v.5.2.1.VSG2.1.1b.bin system compile time: 12/6/2013 16:00:00 [12/06/2013 21:10:51] Hardware cisco Nexus 1000V Chassis ("Virtual Supervisor Module") Intel(R) Xeon(R) CPU E5-2609 with 1933768 kB of memory. Processor Board ID T155D4BC001 Device name: VSG_Fire bootflash: 1451180 kB Kernel uptime is 1 day(s), 16 hour(s), 30 minute(s), 38 second(s) plugin Core Plugin, Ethernet Plugin, Virtualization Plugin vsg # |
Cisco VSG をアップグレードした後に、ポリシー エージェントを再登録する必要があります。
1. アクティブ VSG にログインします。
2. 現在のポリシー エージェントのバージョンを確認します。
3. コンフィギュレーション モードを開始します。
4. VSG から古いポリシー エージェントの登録を解除します。
5. VSG を使用して、新しいポリシー エージェントを登録します。
6. 現在の実行中のコンフィギュレーションをスタートアップ コンフィギュレーションにコピーします。
7. 更新されたポリシー エージェントのバージョンを確認します。
ステップ 1 | アクティブ VSG にログインします。 |
ステップ 2 |
現在のポリシー エージェントのバージョンを確認します。 vsg# show nsc-pa status NSC Policy-Agent status is - Installed Successfully. Version 2.1(1b)-vsg VSG# |
ステップ 3 |
コンフィギュレーション モードを開始します。 vsg# configure terminal Enter configuration commands, one per line. End with CNTL/Z. VSG(config)# |
ステップ 4 |
VSG から古いポリシー エージェントの登録を解除します。 VSG(config)# nsc-policy-agent VSG(config-nsc-policy-agent)# no policy-agent-image |
ステップ 5 |
VSG を使用して、新しいポリシー エージェントを登録します。 VSG(config-nsc-policy-agent)# policy-agent-image bootflash:vnmc-vsgpa.2.1.1e.bin VSG(config-nsc-policy-agent)# exit VSG(config)# |
ステップ 6 |
現在の実行中のコンフィギュレーションをスタートアップ コンフィギュレーションにコピーします。 VSG(config)# copy running startup [########################################] 100% |
ステップ 7 |
更新されたポリシー エージェントのバージョンを確認します。 VSG(config)# show nsc-pa status NSC Policy-Agent status is - Installed Successfully. Version 2.1(1e)-vsg VSG(config)# |
Cisco Nexus 1000V for Microsoft Hyper-V のアップグレードには、次が含まれます。
Cisco Nexus 1000V for Microsoft Hyper-V のアップグレードの詳細については、http://www.cisco.com/en/US/partner/products/ps13056/prod_installation_guides_list.html にある『Cisco Nexus 1000V for Microsoft Hyper-V Installation and Upgrade Guide(Cisco Nexus 1000V for Microsoft Hyper-V インストールおよびアップグレード ガイド)』の「Cisco Nexus 1000V for Microsoft Hyper-V のアップグレード」の章を参照してください。
仮想アプライアンス |
元の状態 |
ステージ 1:Cisco Prime NSC のアップグレードのみ(PA のアップグレードなし) |
ステージ 2:Cisco VSG のアップグレード |
ステージ 3:VSM/VEM のアップグレード |
---|---|---|---|---|
Cisco VSG | 旧 5.2(1)VSG2(1.1a) |
旧 5.2(1)VSG2(1.1a) |
新 5.2(1)VSG2(1.1b) |
新 5.2(1)VSG2(1.1b) |
VSG PA |
旧 2.0 |
旧 2.0 |
新 2.1 |
新 2.1 |
VSM |
旧 5.2(1)SM1(5.2) または 5.2(1)SM1(5.2a) |
旧 5.2(1)SM1(5.2) または 5.2(1)SM1(5.2a) |
旧 5.2(1)SM1(5.2) または 5.2(1)SM1(5.2a) |
新 5.2(1)SM1(5.2b) |
VEM |
旧 5.2(1)SM1(5.2) または 5.2(1)SM1(5.2a) |
旧 5.2(1)SM1(5.2) または 5.2(1)SM1(5.2a) |
旧 5.2(1)SM1(5.2) または 5.2(1)SM1(5.2a) |
新 5.2(1)SM1(5.2b) |
VSM PA |
旧 2.0 |
旧 2.0 |
旧 2.0 |
新 3.2 |
各ステージにアップグレード後にサポートされる操作 |
すべての操作をサポート可 |
|
|
|
各ステージにアップグレード後に制限が課される操作 |
なし |
|
|
|
VSG をアップグレードする際は、VSG のアップグレードの注意事項に従ってください。
ネットワークが安定しているときに、アップグレードをスケジュールします。 アップグレード中はスイッチの設定を行わないでください。
アップグレード イメージのコピーに利用できる十分な容量を確保してください。 アクティブ VSG とスタンバイ VSG の両方に、最小 200 MB のブートフラッシュの空き領域が必要です。
インストール手順の実行中に VSG を稼働しているホストへの電力供給が中断されることがないようにします。
VSG の管理(mgmt0)インターフェイスが動作しており、アクセス可能であることを確認します。
指定したシステム イメージとキックスタート イメージに互いに互換性があることを確認します。
ping コマンドを使用して、リモート サーバへの接続を確認します。
ネットワーク上のすべての Cisco VSG ノードでコマンドを入力します。
EXEC モードで CLI にログインしていること。
switch# copy scp://user@scpserver.cisco.com/downloads/nexus-1000v-kickstart-mz.VSG2.1.1b.bin bootflash:nexus-1000v-kickstart-mz.VSG2.1.1b.bin switch# copy scp://user@scpserver.cisco.com/downloads/nexus-1000v-mz.VSG2.1.1b.bin bootflash:nexus-1000v-mz.VSG2.1.1b.bin switch# copy scp://user@scpserver.cisco.com/downloads/vnmc-vsgpa.2.1(1b).bin bootflash:vnmc-vsgpa.2.1(1b).bin
システムがハイ アベイラビリティ(HA)アップグレード用に HA モードになっていることを、show system redundancy status コマンドを使用して確認済みであること。
1. configure terminal
2. install all kickstart bootflash:nexus-1000v-kickstart-mz.VSG2.1.1b.bin system bootflash:nexus-1000v-mz.VSG2.1.1b.bin
3. show nsc-pa status
4. copy running-config startup-config
コマンドまたはアクション | 目的 | |||
---|---|---|---|---|
ステップ 1 | configure terminal |
グローバル コンフィギュレーション モードを開始します。 |
||
ステップ 2 | install all kickstart bootflash:nexus-1000v-kickstart-mz.VSG2.1.1b.bin system bootflash:nexus-1000v-mz.VSG2.1.1b.bin |
キックスタート イメージ、システム イメージ、およびポリシー エージェント(PA)イメージをインストールします。
|
||
ステップ 3 | show nsc-pa status |
アップグレード後に PA ステータスを確認します。 |
||
ステップ 4 | copy running-config startup-config |
リブートおよびリスタート時に実行コンフィギュレーションをスタートアップ コンフィギュレーションにコピーして、変更を永続的に保存します。 |
次の例は、Cisco VSG リリース 4.2(1)VSG2(1.1a) をリリース 4.2(1)VSG2(1.1b) にアップグレードする方法を示しています。
vsg # configure terminal vsg (config)# install all kickstart bootflash:nexus-1000v-kickstart-mz.VSG2.1.1b.bin system bootflash:nexus-1000v-mz.VSG2.1.1b.bin vsg (config)# show vnm-pa status VNM Policy-Agent status is - Installed Successfully. Version 2.1(1b)-vsg vsg(config)# copy running-config startup-config
Cisco Nexus 1000V for Microsoft Hyper-V のアップグレードには、次が含まれます。
Cisco Nexus 1000V for Microsoft Hyper-V のアップグレードの詳細については、http://www.cisco.com/en/US/partner/products/ps13056/prod_installation_guides_list.html にある『Cisco Nexus 1000V for Microsoft Hyper-V Installation and Upgrade Guide(Cisco Nexus 1000V for Microsoft Hyper-V インストールおよびアップグレード ガイド)』の「Cisco Nexus 1000V for Microsoft Hyper-V のアップグレード」の章を参照してください。
目次
この章は、次の内容で構成されています。
アップグレード前のリリース | 次のセクションの手順を実行 |
---|---|
Cisco VSG リリース 5.2(1)VSG1(4.1) からリリース 5.2(1)VSG2(1.1b) および Cisco VNMC リリース 2.1 から Cisco Prime NSCリリース 3.2 |
Cisco VSG リリース 5.2(1)VSG1(4.1) からリリース 5.2(1)VSG2(1.1b) および Cisco VNMC 2.1 から Cisco Prime NSCリリース 3.2 へのアップグレード手順。 これには、Cisco Nexus 1000V リリース 5.2(1)SM1(5.1) からリリース 5.2(1)SM1(5.2b) へのアップグレード手順も含まれます。 |
Cisco VSG リリース 5.2(1)VSG2(1.1a) からリリース 5.2(1)VSG2(1.1b) |
リリース 5.2(1)VSG2(1.1a) からリリース 5.2(1)VSG2(1.1b) へのCisco VSGアップグレード手順 これには、Cisco Nexux 1000V リリース 5.2(1)SM1(5.2) または 5.2(1)SM1(5.2a) からリリース 5.2(1)SM1(5.2b) へのアップグレード手順が含まれます。 |
![]() (注) |
Cisco VSG と Cisco Prime NSC は、指定の順序でアップグレードすることを強くお勧めします。 指定の順序に従わなければ、接続とデータ通信に障害が起こるおそれがあります。 Cisco Prime NSC は、正しいポリシー エージェント(PA)を使用してアップグレードする必要があります。 |
Cisco Prime NSC ソフトウェアをアップグレードすると、すべての現行の CLI(コマンドライン インターフェイス)および GUI(グラフィカル ユーザ インターフェイス)セッションは中断されます。そのため、CLI または GUI セッションを再起動する必要があります。
スタンドアロンの Cisco VSG のアップグレード手順は hitful なので、新しいイメージを有効にするには Cisco VSG を手動でリロードする必要があります。 HA モードではアップグレードは hitless なので、スタンバイの Cisco VSG が先にアップグレードされ、スイッチオーバーの後に、以前にアクティブだった Cisco VSG がアップグレードされます。
ライセンス情報は Cisco VSG に保存されず、Virtual Supervisor Module(VSM; 仮想スーパーバイザ モジュール)と Virtual Ethernet Module(VEM; 仮想イーサネット モジュール)間に保持されるため、Cisco VSG でパケットが受理されるとライセンスは有効であることを意味し、パケットが処理されます。
アップグレードにより、2 つのバイナリ ファイル(キックスタート ファイルとシステム ファイル)が影響を受けます。
アップグレードを行い、Cisco VSG がオンラインになっても既存の情報は消去されません。 Cisco VSG はステートレスなので、すべての情報はブートアップ時に Cisco Prime NSC から取得されます。
Cisco VSG と Cisco Prime NSC は、指定の順序でアップグレードすることを強くお勧めします。 指定の順序に従わなければ、接続とデータ通信に障害が起こるおそれがあります。 Cisco Prime NSC は、正しいポリシー エージェント(PA)を使用してアップグレードする必要があります。
VSG ユニバーサル ライセンス(UL)を使用して新しい VSG バージョンにアップグレードする前に、VSM モードを拡張モードに変更し、設定を保存したことを確認します。 VSM モードを拡張モードに変更しないで UL を使用して VSG をインストールすると、VSG サービスに障害を発生させることがあります。
アップグレード手順を行う前に、元の Cisco Prime NSC および VSM のスナップショットまたはバックアップ(クローン)を作成してから、VSM および Cisco VSG で ISSU アップグレードを実行することをお勧めします。 手動アップグレードはお勧めしません。
仮想アプライアンス |
元の状態 |
ステージ 1:Cisco Prime NSC のアップグレードのみ(PA のアップグレードなし) |
ステージ 2:Cisco VSG のアップグレード |
ステージ 3:VSM/VEM のアップグレード |
---|---|---|---|---|
Cisco Prime NSC | 旧 Cisco VNMC 2.1 |
新 Cisco Prime NSC 3.0.2 |
新 Cisco Prime NSC 3.0.2 |
新 Cisco Prime NSC 3.0.2 |
新 Cisco Prime NSC 3.0.2 |
新 Cisco Prime NSC 3.2 |
新 Cisco Prime NSC 3.2 |
新 Cisco Prime NSC 3.2 |
|
Cisco VSG | 旧 5.2(1)VSG1(4.1) |
旧 5.2(1)VSG1(4.1) |
新 5.2(1)VSG2(1.1b) |
新 5.2(1)VSG2(1.1b) |
VSG PA |
旧 2.0 |
旧 2.0 |
新 2.1 |
新 2.1 |
VSM |
旧 5.2(1)SM1(5.1) |
旧 5.2(1)SM1(5.1) |
旧 5.2(1)SM1(5.1) |
新 5.2(1)SM1(5.2b) |
VEM |
旧 5.2(1)SM1(5.1) |
旧 5.2(1)SM1(5.1) |
旧 5.2(1)SM1(5.1) |
新 5.2(1)SM1(5.2b) |
VSM PA |
旧 2.0 |
旧 2.0 |
旧 2.0 |
新 3.2 |
各ステージにアップグレード後にサポートされる操作 |
すべての操作をサポート可 |
|||
各ステージにアップグレード後に制限が課される操作 |
なし |
|
|
次に示す制限付き操作は、すべての VEM がアップグレードされていない場合にのみ該当:
|
EXEC モードで CLI にログインしていること。
新しいソフトウェア ファイルをリモート サーバにバックアップし、そのソフトウェア ファイルがリモート サーバに作成されたことを確認していること。
Cisco Prime NSC リリース 3.0.2 をダウンロードしていること。
VNMC VM に 2 台のハード ディスクを追加していること。 Cisco Prime NSC 要件の詳細については、システム要件 を参照してください。
1. nsc# connect local-mgmt
2. (任意) nsc (local-mgmt)# show version
3. (任意) nsc (local-mgmt)# copy scp://user@example-server-ip/example-dir/filename bootflash:/
4. nsc (local-mgmt)# dir bootflash:/
5. nsc (local-mgmt)# update bootflash:/filename
6. (任意) nsc (local-mgmt)# service status
7. (任意) nsc (local-mgmt)# show version
コマンドまたはアクション | 目的 | |||
---|---|---|---|---|
ステップ 1 | nsc# connect local-mgmt | ローカル管理モードを開始します。 |
||
ステップ 2 | nsc (local-mgmt)# show version | (任意) Cisco Prime NSC ソフトウェアのバージョン情報を表示します。 |
||
ステップ 3 | nsc (local-mgmt)# copy scp://user@example-server-ip/example-dir/filename bootflash:/ | (任意) Cisco Prime NSC ソフトウェア ファイルを VM にコピーします。 |
||
ステップ 4 | nsc (local-mgmt)# dir bootflash:/ | 目的のファイルがディレクトリにコピーされたことを確認します。 |
||
ステップ 5 | nsc (local-mgmt)# update bootflash:/filename | Cisco Prime NSC ソフトウェアの更新を開始します。 |
||
ステップ 6 | nsc (local-mgmt)# service status | (任意) サーバが予期したとおりに動作していることを確認できます。 |
||
ステップ 7 | nsc (local-mgmt)# show version | (任意) Cisco Prime NSC ソフトウェア バージョンが更新されていることを確認できます。
|
次の例は、ローカル管理モードに接続する方法を示しています。
nsc# connect local-mgmt Cisco Prime Network Services Controller TAC support: http://www.cisco.com/tac Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained in this software are owned by other third parties and used and distributed under license. Certain components of this software are licensed under the GNU General Public License (GPL) version 2.0 or the GNU Lesser General Public License (LGPL) Version 2.1. A copy of each such license is available at http://www.opensource.org/licenses/gpl-2.0.php and http://www.opensource.org/licenses/lgpl-2.1.php
次の例は、Cisco VNMC のバージョン情報を表示する方法を示しています。
nsc(local-mgmt)# show version Name Package Version GUI ---- ------- ------- ---- core Base System 2.1 2.1 service-reg Service Registry 2.1 2.1 policy-mgr Policy Manager 2.1 2.1 resource-mgr Resource Manager 2.1 2.1 vm-mgr VM manager 2.1 none
次の例は、Cisco Prime NSC ソフトウェアを VM にコピーする方法を示しています。
nsc(local-mgmt)# copy scp://<user@example-server-ip>/example1-dir/nsc.3.0.2e.bin bootflash:/ Enter password: 100% 143MB 11.9MB/s 00:12
次の例は、Cisco Prime NSC のディレクトリ情報を表示する方法を示しています。
nsc(local-mgmt)# dir bootflash:/ 1.1G Oct 14 00:57 nsc.3.0.2e.bin Usage for bootflash:// 6359716 KB used 10889320 KB free 18187836 KB total
次の例は、Cisco Prime NSC の更新を開始する方法を示しています。
nsc(local-mgmt)# update bootflash:/nsc.3.0.2e.bin It is recommended that you perform a full-state backup before updating any VNMC component. Press enter to continue or Ctrl-c to exit.
次の例は、Cisco Prime NSC の更新後のバージョンを表示する方法を示しています。
nsc(local-mgmt)# show version Name Package Version GUI ---- ------- ------- ---- core Base System 3.0(2e) 3.0(2e) service-reg Service Registry 3.0(2e) 3.0(2e) policy-mgr Policy Manager 3.0(2e) 3.0(2e) resource-mgr Resource Manager 3.0(2e) 3.0(2e) vm-mgr VM manager 3.0(2e) none cloudprovider-mgr Cloud Provider Mgr 3.0(2e) none
EXEC モードで CLI にログインしていること。
新しいソフトウェア ファイルをリモート サーバにバックアップし、そのソフトウェア ファイルがリモート サーバに作成されたことを確認していること。
Cisco Prime NSC リリース 3.2 がダウンロードされていること。
2 台のハード ディスクを Cisco Prime NSC VM に追加していること。 Cisco Prime NSC の要件の詳細については、システム要件 を参照してください。
1. nsc# connect local-mgmt
2. (任意) nsc (local-mgmt)# show version
3. (任意) nsc (local-mgmt)# copy scp://user@example-server-ip/example-dir/filename bootflash:/
4. nsc (local-mgmt)# dir bootflash:/
5. nsc (local-mgmt)# update bootflash:/filename
6. (任意) nsc (local-mgmt)# service status
7. (任意) nsc (local-mgmt)# show version
コマンドまたはアクション | 目的 | |||
---|---|---|---|---|
ステップ 1 | nsc# connect local-mgmt | ローカル管理モードを開始します。 |
||
ステップ 2 | nsc (local-mgmt)# show version | (任意) Cisco Prime NSC ソフトウェアのバージョン情報を表示します。 |
||
ステップ 3 | nsc (local-mgmt)# copy scp://user@example-server-ip/example-dir/filename bootflash:/ | (任意) Cisco Prime NSC ソフトウェア ファイルを VM にコピーします。 |
||
ステップ 4 | nsc (local-mgmt)# dir bootflash:/ | 目的のファイルがディレクトリにコピーされたことを確認します。 |
||
ステップ 5 | nsc (local-mgmt)# update bootflash:/filename | Cisco Prime NSC ソフトウェアの更新を開始します。 |
||
ステップ 6 | nsc (local-mgmt)# service status | (任意) サーバが予期したとおりに動作していることを確認できます。 |
||
ステップ 7 | nsc (local-mgmt)# show version | (任意) Cisco Prime NSC ソフトウェア バージョンが更新されていることを確認できます。
|
次の例は、ローカル管理モードに接続する方法を示しています。
nsc# connect local-mgmt Cisco Prime Network Services Controller TAC support: http://www.cisco.com/tac Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained in this software are owned by other third parties and used and distributed under license. Certain components of this software are licensed under the GNU General Public License (GPL) version 2.0 or the GNU Lesser General Public License (LGPL) Version 2.1. A copy of each such license is available at http://www.opensource.org/licenses/gpl-2.0.php and http://www.opensource.org/licenses/lgpl-2.1.php
次の例は、Cisco Prime NSC のバージョン情報を表示する方法を示しています。
nsc(local-mgmt)# show version Name Package Version GUI ---- ------- ------- ---- core Base System 3.0(2e) 3.0(2e) service-reg Service Registry 3.0(2e) 3.0(2e) policy-mgr Policy Manager 3.0(2e) 3.0(2e) resource-mgr Resource Manager 3.0(2e) 3.0(2e) vm-mgr VM manager 3.0(2e) none cloudprovider-mgr Cloud Provider Mgr 3.0(2e) none
次の例は、Cisco Prime NSC ソフトウェアを VM にコピーする方法を示しています。
nsc(local-mgmt)# copy scp://<user@example-server-ip>/example1-dir/nsc.3.2.bin bootflash:/ Enter password: 100% 143MB 11.9MB/s 00:12
次の例は、Cisco Prime NSC のディレクトリ情報を表示する方法を示しています。
nsc(local-mgmt)# dir bootflash:/ 1.1G Oct 14 00:57 nsc.3.2.bin Usage for bootflash:// 6359716 KB used 10889320 KB free 18187836 KB total
次の例は、Cisco Prime NSC の更新を開始する方法を示しています。
nsc(local-mgmt)# update bootflash:/nsc.3.2.bin It is recommended that you perform a full-state backup before updating any VNMC component. Press enter to continue or Ctrl-c to exit.
次の例は、Cisco Prime NSC の更新後のバージョンを表示する方法を示しています。
nsc(local-mgmt)# show version Name Package Version GUI ---- ------- ------- ---- core Base System 3.2 3.2 service-reg Service Registry 3.2 3.2 policy-mgr Policy Manager 3.2 3.2 resource-mgr Resource Manager 3.2 3.2 vm-mgr VM manager 3.2 none cloudprovider-mgr Cloud Provider Mgr 3.2 none
VSG をアップグレードする際は、VSG のアップグレードの注意事項に従ってください。
ネットワークが安定しているときに、アップグレードをスケジュールします。 アップグレード中はスイッチの設定を行わないでください。
アップグレード イメージのコピーに利用できる十分な容量を確保してください。 アクティブ VSG とスタンバイ VSG の両方に、最小 200 MB のブートフラッシュの空き領域が必要です。
インストール手順の実行中に VSG を稼働しているホストへの電力供給が中断されることがないようにします。
VSG の管理(mgmt0)インターフェイスが動作しており、アクセス可能であることを確認します。
指定したシステム イメージとキックスタート イメージに互いに互換性があることを確認します。
ping コマンドを使用して、リモート サーバへの接続を確認します。
1. アクティブ VSG にログインします。
2. 現在のブート変数を表示します。
3. イメージ ファイルをコピーするのに十分な空き容量があるかを確認します。 新しい VSG イメージをコピーするために十分な空き容量を増やす必要がある場合は、不要なファイルを削除します。
4. スタンバイ VSG に利用可能な必要容量があることを確認します。 新しい VSG イメージをコピーするために十分な空き容量を増やす必要がある場合は、不要なファイルを削除します。
5. Cisco Nexus 1000V キックスタート ファイル、およびシステム ソフトウェア ファイルをサーバにコピーします。
6. 現在のブート変数を削除します。
7. 現在のブート変数を表示します。
8. 新しいブート変数をロードし、実行中のコンフィギュレーションをスタートアップ コンフィギュレーションにコピーします。
9. 手動でシステムを再起動します。
10. インストール処理が完了したらログインし、スイッチがアップグレードされたソフトウェア バージョンを実行していることを確認します。
ステップ 1 | アクティブ VSG にログインします。 | ||
ステップ 2 |
現在のブート変数を表示します。 vsg# show boot Current Boot Variables: sup-1 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin sup-2 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin No module boot variable set Boot Variables on next reload: sup-1 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin sup-2 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin No module boot variable set |
||
ステップ 3 |
イメージ ファイルをコピーするのに十分な空き容量があるかを確認します。 新しい VSG イメージをコピーするために十分な空き容量を増やす必要がある場合は、不要なファイルを削除します。 vsg(config)# dir . . . Usage for bootflash:// 692117504 bytes used 5711851520 bytes free 6403969024 bytes total |
||
ステップ 4 |
スタンバイ VSG に利用可能な必要容量があることを確認します。 新しい VSG イメージをコピーするために十分な空き容量を増やす必要がある場合は、不要なファイルを削除します。 vsg(config)# dir bootflash://sup-standby/ . . . Usage for bootflash://sup-standby 577372160 bytes used 5826600960 bytes free 6403973120 bytes total |
||
ステップ 5 |
Cisco Nexus 1000V キックスタート ファイル、およびシステム ソフトウェア ファイルをサーバにコピーします。 vsg(config)# copy scp://user@scpserver.cisco.com/downloads/nexus-1000v-kickstart.5.2.1.VSG2.1.1b.bin ./ vsg(config)#copy scp://user@scpserver.cisco.com/downloads/nexus-1000v.5.2.1.VSG2.1.1b.bin ./ |
||
ステップ 6 |
現在のブート変数を削除します。 vsg(config)# no boot system vsg(config)# no boot kickstart |
||
ステップ 7 |
現在のブート変数を表示します。 vsg(config)# show boot Current Boot Variables: sup-1 kickstart variable not set system variable not set sup-2 kickstart variable not set system variable not set No module boot variable set Boot Variables on next reload: sup-1 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin sup-2 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin No module boot variable set |
||
ステップ 8 |
新しいブート変数をロードし、実行中のコンフィギュレーションをスタートアップ コンフィギュレーションにコピーします。 vsg# configure terminal vsg(config)# boot system bootflash:///nexus-1000v.5.2.1.VSG2.1.1b.bin vsg(config)# boot kickstart bootflash:///nexus-1000v-kickstart.5.2.1.VSG2.1.1b.bin vsg(config)# copy running-config startup-config |
||
ステップ 9 |
手動でシステムを再起動します。 vsg(config)# reload This command will reboot the system. (y/n)? [n] If you want to continue with the reboot, press Y.
|
||
ステップ 10 |
インストール処理が完了したらログインし、スイッチがアップグレードされたソフトウェア バージョンを実行していることを確認します。
switch# show version Cisco Nexus Operating System (NX-OS) Software TAC support: http://www.cisco.com/tac Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained herein are owned by other third parties and are used and distributed under license. Some parts of this software are covered under the GNU Public License. A copy of the license is available at http://www.gnu.org/licenses/gpl.html. Software loader: version unavailable [last: image booted through mgmt0] kickstart: version 5.2(1)VSG2(1.1b) system: version 5.2(1)VSG2(1.1b) system image file is: bootflash:///nexus-1000v.5.2.1.VSG2.1.1b.bin system compile time: 12/6/2013 16:00:00 [12/06/2013 21:10:51] Hardware cisco Nexus 1000V Chassis ("Virtual Supervisor Module") Intel(R) Xeon(R) CPU E5-2609 with 1933768 kB of memory. Processor Board ID T155D4BC001 Device name: VSG_Fire bootflash: 1451180 kB Kernel uptime is 1 day(s), 16 hour(s), 30 minute(s), 38 second(s) plugin Core Plugin, Ethernet Plugin, Virtualization Plugin vsg # |
1. アクティブ VSG にログインします。
2. show boot コマンドを使用して、現在のブート変数を表示します。
3. イメージ ファイルをコピーするのに十分な空き容量があるかを確認します。 新しい VSG イメージをコピーするために十分な空き容量を増やす必要がある場合は、不要なファイルを削除します。
4. Cisco Nexus 1000V キックスタート ファイル、およびシステム ソフトウェア ファイルをサーバにコピーします。
5. 現在のブート変数を削除します。
6. 現在のブート変数を表示します。
7. 新しいブート変数をロードし、実行中のコンフィギュレーションをスタートアップ コンフィギュレーションにコピーします。
8. 手動でシステムを再起動します。
9. インストール処理が完了したらログインし、スイッチがアップグレードされたソフトウェア バージョンを実行していることを確認します。
ステップ 1 | アクティブ VSG にログインします。 | ||
ステップ 2 |
show boot コマンドを使用して、現在のブート変数を表示します。 vsg# show boot Current Boot Variables: sup-1 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin sup-2 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin No module boot variable set Boot Variables on next reload: sup-1 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin sup-2 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin No module boot variable set |
||
ステップ 3 |
イメージ ファイルをコピーするのに十分な空き容量があるかを確認します。 新しい VSG イメージをコピーするために十分な空き容量を増やす必要がある場合は、不要なファイルを削除します。 vsg(config)# dir . . . Usage for bootflash:// 692117504 bytes used 5711851520 bytes free 6403969024 bytes total |
||
ステップ 4 |
Cisco Nexus 1000V キックスタート ファイル、およびシステム ソフトウェア ファイルをサーバにコピーします。 vsg(config)# copy scp://user@scpserver.cisco.com/downloads/nexus-1000v-kickstart.5.2.1.VSG2.1.1b.bin ./ |
||
ステップ 5 |
現在のブート変数を削除します。 vsg(config)# no boot system vsg(config)# no boot kickstart |
||
ステップ 6 |
現在のブート変数を表示します。 vsg(config)# show boot Current Boot Variables: sup-1 kickstart variable not set system variable not set sup-2 kickstart variable not set system variable not set No module boot variable set Boot Variables on next reload: sup-1 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin sup-2 kickstart variable = bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin system variable = bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin No module boot variable set |
||
ステップ 7 |
新しいブート変数をロードし、実行中のコンフィギュレーションをスタートアップ コンフィギュレーションにコピーします。 vsg# configure terminal vsg(config)# boot system bootflash:///nexus-1000v.5.2.1.VSG2.1.1b.bin vsg(config)# boot kickstart bootflash:///nexus-1000v-kickstart.5.2.1.VSG2.1.1b.bin vsg(config)# copy running-config startup-config |
||
ステップ 8 |
手動でシステムを再起動します。 vsg(config)# reload This command will reboot the system. (y/n)? [n] If you want to continue with the reboot, press Y.
|
||
ステップ 9 |
インストール処理が完了したらログインし、スイッチがアップグレードされたソフトウェア バージョンを実行していることを確認します。
switch# show version Cisco Nexus Operating System (NX-OS) Software TAC support: http://www.cisco.com/tac Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained herein are owned by other third parties and are used and distributed under license. Some parts of this software are covered under the GNU Public License. A copy of the license is available at http://www.gnu.org/licenses/gpl.html. Software loader: version unavailable [last: image booted through mgmt0] kickstart: version 5.2(1)VSG2(1.1b) system: version 5.2(1)VSG2(1.1b) system image file is: bootflash:///nexus-1000v.5.2.1.VSG2.1.1b.bin system compile time: 12/6/2013 16:00:00 [12/06/2013 21:10:51] Hardware cisco Nexus 1000V Chassis ("Virtual Supervisor Module") Intel(R) Xeon(R) CPU E5-2609 with 1933768 kB of memory. Processor Board ID T155D4BC001 Device name: VSG_Fire bootflash: 1451180 kB Kernel uptime is 1 day(s), 16 hour(s), 30 minute(s), 38 second(s) plugin Core Plugin, Ethernet Plugin, Virtualization Plugin vsg # |
1. アクティブ VSG にログインします。
2. 現在のポリシー エージェントのバージョンを確認します。
3. コンフィギュレーション モードを開始します。
4. VSG から古いポリシー エージェントの登録を解除します。
5. VSG を使用して、新しいポリシー エージェントを登録します。
6. 現在の実行中のコンフィギュレーションをスタートアップ コンフィギュレーションにコピーします。
7. 更新されたポリシー エージェントのバージョンを確認します。
ステップ 1 | アクティブ VSG にログインします。 |
ステップ 2 |
現在のポリシー エージェントのバージョンを確認します。 vsg# show nsc-pa status NSC Policy-Agent status is - Installed Successfully. Version 2.1(1b)-vsg VSG# |
ステップ 3 |
コンフィギュレーション モードを開始します。 vsg# configure terminal Enter configuration commands, one per line. End with CNTL/Z. VSG(config)# |
ステップ 4 |
VSG から古いポリシー エージェントの登録を解除します。 VSG(config)# nsc-policy-agent VSG(config-nsc-policy-agent)# no policy-agent-image |
ステップ 5 |
VSG を使用して、新しいポリシー エージェントを登録します。 VSG(config-nsc-policy-agent)# policy-agent-image bootflash:vnmc-vsgpa.2.1.1e.bin VSG(config-nsc-policy-agent)# exit VSG(config)# |
ステップ 6 |
現在の実行中のコンフィギュレーションをスタートアップ コンフィギュレーションにコピーします。 VSG(config)# copy running startup [########################################] 100% |
ステップ 7 |
更新されたポリシー エージェントのバージョンを確認します。 VSG(config)# show nsc-pa status NSC Policy-Agent status is - Installed Successfully. Version 2.1(1e)-vsg VSG(config)# |
Cisco Nexus 1000V for Microsoft Hyper-V のアップグレードには、次が含まれます。
Cisco Nexus 1000V for Microsoft Hyper-V のアップグレードの詳細については、http://www.cisco.com/en/US/partner/products/ps13056/prod_installation_guides_list.html にある『Cisco Nexus 1000V for Microsoft Hyper-V Installation and Upgrade Guide(Cisco Nexus 1000V for Microsoft Hyper-V インストールおよびアップグレード ガイド)』の「Cisco Nexus 1000V for Microsoft Hyper-V のアップグレード」の章を参照してください。
仮想アプライアンス |
元の状態 |
ステージ 1:Cisco Prime NSC のアップグレードのみ(PA のアップグレードなし) |
ステージ 2:Cisco VSG のアップグレード |
ステージ 3:VSM/VEM のアップグレード |
---|---|---|---|---|
Cisco VSG | 旧 5.2(1)VSG2(1.1a) |
旧 5.2(1)VSG2(1.1a) |
新 5.2(1)VSG2(1.1b) |
新 5.2(1)VSG2(1.1b) |
VSG PA |
旧 2.0 |
旧 2.0 |
新 2.1 |
新 2.1 |
VSM |
旧 5.2(1)SM1(5.2) または 5.2(1)SM1(5.2a) |
旧 5.2(1)SM1(5.2) または 5.2(1)SM1(5.2a) |
旧 5.2(1)SM1(5.2) または 5.2(1)SM1(5.2a) |
新 5.2(1)SM1(5.2b) |
VEM |
旧 5.2(1)SM1(5.2) または 5.2(1)SM1(5.2a) |
旧 5.2(1)SM1(5.2) または 5.2(1)SM1(5.2a) |
旧 5.2(1)SM1(5.2) または 5.2(1)SM1(5.2a) |
新 5.2(1)SM1(5.2b) |
VSM PA |
旧 2.0 |
旧 2.0 |
旧 2.0 |
新 3.2 |
各ステージにアップグレード後にサポートされる操作 |
すべての操作をサポート可 |
|||
各ステージにアップグレード後に制限が課される操作 |
なし |
|
|
次に示す制限付き操作は、すべての VEM がアップグレードされていない場合にのみ該当:
|
VSG をアップグレードする際は、VSG のアップグレードの注意事項に従ってください。
ネットワークが安定しているときに、アップグレードをスケジュールします。 アップグレード中はスイッチの設定を行わないでください。
アップグレード イメージのコピーに利用できる十分な容量を確保してください。 アクティブ VSG とスタンバイ VSG の両方に、最小 200 MB のブートフラッシュの空き領域が必要です。
インストール手順の実行中に VSG を稼働しているホストへの電力供給が中断されることがないようにします。
VSG の管理(mgmt0)インターフェイスが動作しており、アクセス可能であることを確認します。
指定したシステム イメージとキックスタート イメージに互いに互換性があることを確認します。
ping コマンドを使用して、リモート サーバへの接続を確認します。
EXEC モードで CLI にログインしていること。
switch# copy scp://user@scpserver.cisco.com/downloads/nexus-1000v-kickstart-mz.VSG2.1.1b.bin bootflash:nexus-1000v-kickstart-mz.VSG2.1.1b.bin switch# copy scp://user@scpserver.cisco.com/downloads/nexus-1000v-mz.VSG2.1.1b.bin bootflash:nexus-1000v-mz.VSG2.1.1b.bin switch# copy scp://user@scpserver.cisco.com/downloads/vnmc-vsgpa.2.1(1b).bin bootflash:vnmc-vsgpa.2.1(1b).bin
システムがハイ アベイラビリティ(HA)アップグレード用に HA モードになっていることを、show system redundancy status コマンドを使用して確認済みであること。
1. configure terminal
2. install all kickstart bootflash:nexus-1000v-kickstart-mz.VSG2.1.1b.bin system bootflash:nexus-1000v-mz.VSG2.1.1b.bin
3. show nsc-pa status
4. copy running-config startup-config
コマンドまたはアクション | 目的 | |||
---|---|---|---|---|
ステップ 1 | configure terminal |
グローバル コンフィギュレーション モードを開始します。 |
||
ステップ 2 | install all kickstart bootflash:nexus-1000v-kickstart-mz.VSG2.1.1b.bin system bootflash:nexus-1000v-mz.VSG2.1.1b.bin |
キックスタート イメージ、システム イメージ、およびポリシー エージェント(PA)イメージをインストールします。
|
||
ステップ 3 | show nsc-pa status |
アップグレード後に PA ステータスを確認します。 |
||
ステップ 4 | copy running-config startup-config |
リブートおよびリスタート時に実行コンフィギュレーションをスタートアップ コンフィギュレーションにコピーして、変更を永続的に保存します。 |
次の例は、Cisco VSG リリース 4.2(1)VSG2(1.1a) をリリース 4.2(1)VSG2(1.1b) にアップグレードする方法を示しています。
vsg # configure terminal vsg (config)# install all kickstart bootflash:nexus-1000v-kickstart-mz.VSG2.1.1b.bin system bootflash:nexus-1000v-mz.VSG2.1.1b.bin vsg (config)# show vnm-pa status VNM Policy-Agent status is - Installed Successfully. Version 2.1(1b)-vsg vsg(config)# copy running-config startup-config
Cisco Nexus 1000V for Microsoft Hyper-V のアップグレードには、次が含まれます。
Cisco Nexus 1000V for Microsoft Hyper-V のアップグレードの詳細については、http://www.cisco.com/en/US/partner/products/ps13056/prod_installation_guides_list.html にある『Cisco Nexus 1000V for Microsoft Hyper-V Installation and Upgrade Guide(Cisco Nexus 1000V for Microsoft Hyper-V インストールおよびアップグレード ガイド)』の「Cisco Nexus 1000V for Microsoft Hyper-V のアップグレード」の章を参照してください。