この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
ここでは、Cisco ASR 9000 シリーズ ルータでブロードバンド ネットワーク ゲートウェイ(BNG)の show subscriber コマンドの設定に使用される Cisco IOS XR ソフトウェア コマンドについて説明します。 関連の設定の詳細については、『Cisco IOS XR Broadband Network Gateway Configuration Guide』を参照してください。
加入者データベースの設定の詳細を表示するには、EXEC モードで show subscriber database コマンドを使用します。
show subscriber database { association | client | configuration | interface | trace }
association | 加入者セッションと動的なテンプレートの間のアソシエーションを表示します。 |
client | クライアント接続 ID を表示します。 |
configuration | 加入者設定データベース情報を表示します。 |
interface | セッション ID とインターフェイス ハンドル間のマッピングを表示します。 |
trace | show subscriber database のトレースを表示します。 |
デフォルトの動作または値はありません。
EXEC
リリース | 変更内容 |
---|---|
リリース 4.2.0 |
このコマンドが追加されました。 |
このコマンドを使用するには、適切なタスク ID を含むタスク グループに関連付けられているユーザ グループに属している必要があります。 ユーザ グループの割り当てが原因でコマンドを使用できないと考えられる場合、AAA 管理者に連絡してください。
タスク ID | 操作 |
---|---|
network |
読み取り |
RP/0/RSP0/CPU0:router# show subscriber database association Mon Jun 14 16:24:50.432 EDT Object Name: TEMPL1 Object Type: IP-SUBSCRIBER-TEMPLATE Feature Name: IPV4 Attribute Name: ipv4/unnumbered reference count : 1 sysDb pathname : /cfg/gl/dynamic-templates/ipsu bscriber/TEMPL1/ipv4/unnumbered datatype : string length : 10 value : Loopback0 Object Name: TEMPL2 Object Type: IP-SUBSCRIBER-TEMPLATE Feature Name: IPV4 Attribute Name: ipv4/mtu reference count : 1 sysDb pathname : /cfg/gl/dynamic-templates/ipsu bscriber/ss/ipv4/mtu datatype : uint32 length : 4 value : 1500 Feature Name: QoS Attribute Name: qos/service_policy_in/qos_policy reference count : 1 sysDb pathname : /cfg/gl/dynamic-templates/ipsu bscriber/ss/qos/service_policy_in/: qos_policy datatype : packed length : 20 value : packed AB CD 43 21 02 00 04 00 00 00 00 03 00 00 03 00 00 06 00 00 Feature Name: 'RSI' Attribute Name: rsi/vrf reference count : 1 sysDb pathname : /cfg/gl/dynamic-templates/ipsu bscriber/ss/rsi/vrf datatype : 3 length : 5 value : blue RP/0/RSP0/CPU0:router# show subscriber database client Tue Jun 15 11:00:19.650 EDT Client Connection Identifier: 0x0 ===================================== ref_count = 3 req_count = 0 bpi_reg_count = 0 spi_reconciled = TRUE bpi_reconciled = FALSE client_restarted = FALSE client_name = template-mgr timer_running = FALSE spi_cb_info: N/A Persistent Information: in_use = TRUE forced_full_resync = FALSE client_flags = TMPL_PROD state = SUBDB_CLIENT_FULL instance_no = 0 num_bpi_regs = 0 num_send_drop_bpi_msg = 0 num_send_drop_spi_msg = 0 num_recv_drop_bpi_msg = 0 num_recv_drop_spi_msg = 0 num_sent_bpi_msg = 0 num_sent_spi_msg = 0 num_recv_bpi_msg = 0 num_recv_spi_msg = 0 num_sent_pulse = 0 SPI AIPC Information: conn_present = 0 tx_attempt_count = 0 tx_count = 0 rx_count = 0 notify_connect_count = 0 notify_queue_high_count = 0 notify_queue_low_count = 0 notify_queue_full_count = 0 notify_data_waiting_count = 0 notify_error_count = 0 notify_close_count = 0 notify_sendstatus_count = 0 notify_open_count = 0 pulse_data_waiting_count = 0 queue_full = 0 queue_full_drop = 0 outstanding_buffers = 0 overflow_queue_size = 0 cumulative_overflow_msgs = 0 hwm_overflow_msgs = 0 BPI AIPC Information: conn_present = 1 tx_attempt_count = 0 tx_count = 0 rx_count = 1 notify_connect_count = 0 notify_queue_high_count = 0 notify_queue_low_count = 0 notify_data_waiting_count = 1 notify_error_count = 0 notify_close_count = 0 notify_sendstatus_count = 0 notify_open_count = 1 queue_full = 0 queue_full_drop = 0 outstanding_buffers = 0 overflow_queue_size = 0 cumulative_overflow_msgs = 0 hwm_overflow_msgs = 0 Feature Information (number of entries = 3): --------------------------------------------------- ***Feature Name*** = RSI Connection ID = 0x1 Session type = SUBDB_SESSION_LABEL_TYPE_IP_SUB_INBAND Activate Required = FALSE Config Set ID = 1 Registration Handle = 0x1 whichevent[0] = SUBDB_CB_EVENT_NONE whichevent[1] = SUBDB_CB_EVENT_ALL Feature State = SUBDB_FEATURE_REGISTERED ***Feature Name*** = RSI Connection ID = 0x1 Session type = SUBDB_SESSION_LABEL_TYPE_PPPOE_SUB Activate Required = FALSE Config Set ID = 1 Registration Handle = 0x2 whichevent[0] = SUBDB_CB_EVENT_NONE whichevent[1] = SUBDB_CB_EVENT_ALL Feature State = SUBDB_FEATURE_REGISTERED ***Feature Name*** = RSI Connection ID = 0x1 Session type = SUBDB_SESSION_LABEL_TYPE_IP_SUB_DHCP Activate Required = FALSE Config Set ID = 1 Registration Handle = 0x3 whichevent[0] = SUBDB_CB_EVENT_NONE whichevent[1] = SUBDB_CB_EVENT_ALL Feature State = SUBDB_FEATURE_REGISTERED Client Connection Identifier: 0x2 ===================================== ref_count = 2 req_count = 0 bpi_reg_count = 0 spi_reconciled = TRUE bpi_reconciled = TRUE client_restarted = FALSE client_name = iedge SVM timer_running = FALSE spi_cb_info: SUBDB_SPI_CB_PROD_ALL_DONE = SUBDB_CB_EVENT_NONE SUBDB_SPI_CB_SESSION_PROD_DONE = SUBDB_CB_EVENT_ALL SUBDB_SPI_CB_SESSION_ACTIVATED = SUBDB_CB_EVENT_NONE SUBDB_SPI_CB_SESSION_CREATED = SUBDB_CB_EVENT_NONE SUBDB_SPI_CB_SESSION_DESTROYED = SUBDB_CB_EVENT_NONE SUBDB_SPI_CB_SESSION_ASSOCIATED = SUBDB_CB_EVENT_ALL SUBDB_SPI_CB_SESSION_UNASSOCIATED = SUBDB_CB_EVENT_ALL SUBDB_SPI_CB_SESSION_CONFIG_CHANGED = SUBDB_CB_EVENT_ALL SUBDB_SPI_CB_TEMPLATE_INSTALLED = SUBDB_CB_EVENT_ALL SUBDB_SPI_CB_TEMPLATE_UNINSTALLED = SUBDB_CB_EVENT_ALL SUBDB_SPI_CB_OBJECT_AGEOUT = SUBDB_CB_EVENT_ALL Persistent Information: in_use = TRUE forced_full_resync = FALSE client_flags = TMPL_PROD, SESS_PROD state = SUBDB_CLIENT_FULL instance_no = 1 num_bpi_regs = 0 num_send_drop_bpi_msg = 0 num_send_drop_spi_msg = 0 num_recv_drop_bpi_msg = 0 num_recv_drop_spi_msg = 0 num_sent_bpi_msg = 0 num_sent_spi_msg = 0 num_recv_bpi_msg = 0 num_recv_spi_msg = 1 num_sent_pulse = 0 SPI AIPC Information: conn_present = 1 tx_attempt_count = 0 tx_count = 0 rx_count = 2 notify_connect_count = 0 notify_queue_high_count = 0 notify_queue_low_count = 0 notify_queue_full_count = 0 notify_data_waiting_count = 2 notify_error_count = 0 notify_close_count = 0 notify_sendstatus_count = 0 notify_open_count = 1 pulse_data_waiting_count = 0 queue_full = 0 queue_full_drop = 0 outstanding_buffers = 0 overflow_queue_size = 0 cumulative_overflow_msgs = 0 hwm_overflow_msgs = 0 BPI AIPC Information: conn_present = 0 tx_attempt_count = 0 tx_count = 0 rx_count = 0 notify_connect_count = 0 notify_queue_high_count = 0 notify_queue_low_count = 0 notify_data_waiting_count = 0 notify_error_count = 0 notify_close_count = 0 notify_sendstatus_count = 0 notify_open_count = 0 queue_full = 0 queue_full_drop = 0 outstanding_buffers = 0 overflow_queue_size = 0 cumulative_overflow_msgs = 0 hwm_overflow_msgs = 0 Feature Information (number of entries = 0): --------------------------------------------------- RP/0/RSP0/CPU0:router# show subscriber database interface Tue Jun 15 09:05:53.769 EDT Interface Ifhandle Session ID: Gi0/2/0/0.ip1 0x1000040 0x4000000 Gi0/2/0/0.ip2 0x1000060 0x4000082 RP/0/RSP0/CPU0:router# show subscriber database trace Tue Jun 15 09:05:53.769 EDT 3 wrapping entries (2048 possible, 0 filtered, 3 total) Jun 15 06:49:40.123 subdb/common 0/0/CPU0 t4004322208 Process client ID '2' with connection event 'RESTARTED' Jun 15 06:49:40.125 subdb/common 0/0/CPU0 t4153857728 Process SPI END RECONCILE msg for client '2 [ring index '0'] Jun 15 06:49:40.125 subdb/common 0/0/CPU0 t4004322208 Process client ID '2' with connection event 'RECONCILED'
コマンド |
説明 |
---|---|
パケットのアクセス コントロールを指定します。 |
|
IPv4 の最大伝送単位(MTU)を設定します。 |
|
明示的なアドレスを使用せずに IPv4 処理をイネーブルにします。 |
|
パケット検証ごとにイネーブルにします。 |
加入者管理内部マネージャ情報を表示するには、EXEC モードで show subscriber manager コマンドを使用します。
show subscriber manager statistics
AAA accounting | AAA アカウンティング コーディネータの統計情報を表示します。 |
AAA authentication | AAA 認証コーディネータの統計情報を表示します。 |
AAA authorization | AAA 許可コーディネータの統計情報を表示します。 |
AAA CoA | AAA CoA コーディネータの統計情報を表示します。 |
AAA all | AAA コーディネータの統計情報をすべて表示します。 |
summary | サマリー統計情報を表示します。 |
デフォルトの動作または値はありません。
EXEC
リリース | 変更内容 |
---|---|
リリース 4.2.0 |
このコマンドが追加されました。 |
このコマンドを使用するには、適切なタスク ID を含むタスク グループに関連付けられているユーザ グループに属している必要があります。 ユーザ グループの割り当てが原因でコマンドを使用できないと考えられる場合、AAA 管理者に連絡してください。
タスク ID | 操作 |
---|---|
network |
読み取り |
RP/0/RSP0/CPU0:router# show subscriber manager statistics AAA all RP/0/RSP0/CPU0:router# show subscriber manager statistics AAA accounting RP/0/RSP0/CPU0:router# show subscriber manager statistics summary
動的なテンプレートから取得した加入者の実行コンフィギュレーションを表示するには、EXEC で show subscriber running-config コマンドを使用します。
show subscriber running-config { location | subscriber-label }
location | 指定した場所にあるすべてのセッションの加入者データベースの実行コンフィギュレーション情報を表示します。 |
subscriber-label | 0X0 ~ 0xffffffff の範囲の 16 進数の値の加入者値を入力できるようにします。 |
| | 出力修飾子を指定します。 |
デフォルトの動作または値はありません。
EXEC
リリース | 変更内容 |
---|---|
リリース 4.2.0 |
このコマンドが追加されました。 |
このコマンドを使用するには、適切なタスク ID を含むタスク グループに関連付けられているユーザ グループに属している必要があります。 ユーザ グループの割り当てが原因でコマンドを使用できないと考えられる場合、AAA 管理者に連絡してください。
タスク ID | 操作 |
---|---|
network |
読み取り |
RP/0/RSP0/CPU0:router# show subscriber running-config
Tue Jun 15 09:05:53.769 EDT
Session ID: 0x4000000
dynamic-template
type ipsubscriber TEMPL1
ipv4 unnumbered Loopback0
!
!
dynamic-template
type ipsubscriber TEMPL2
service-policy input qos_policy
vrf blue
ipv4 mtu 1500
!
!
Session ID: 0x4000082
dynamic-template
type ipsubscriber TEMPL1
ipv4 unnumbered Loopback0
!
!
dynamic-template
type ipsubscriber TEMPL2
service-policy input qos_policy
vrf blue
ipv4 mtu 1500
!
!
コマンド |
説明 |
---|---|
パケットのアクセス コントロールを指定します。 |
|
IPv4 の最大伝送単位(MTU)を設定します。 |
|
明示的なアドレスを使用せずに IPv4 処理をイネーブルにします。 |
|
パケット検証ごとにイネーブルにします。 |
加入者管理セッション情報を表示するには、EXEC モードで show subscriber session コマンドを使用します。
show subscriber session { all { detail | location | summary | username } filter subscriber-label }
all | すべての加入者セッションを表示します。 |
detail | 加入者の sessionfixme の詳細情報を表示します。 |
location | 場所を指定します。 |
summary | 加入者セッションのサマリー情報を表示します |
username | 加入者セッションのユーザ名を表示します。 |
filter | フィルタ基準に基づいて加入者セッション データベースの検索結果を表示します。 |
subscriber-label | 加入者セッションの一意の ID を表示します。 |
デフォルトの動作または値はありません。
EXEC
リリース | 変更内容 |
---|---|
リリース 4.2.0 |
このコマンドが追加されました。 |
このコマンドを使用するには、適切なタスク ID を含むタスク グループに関連付けられているユーザ グループに属している必要があります。 ユーザ グループの割り当てが原因でコマンドを使用できないと考えられる場合、AAA 管理者に連絡してください。
タスク ID | 操作 |
---|---|
network |
読み取り |
config-services |
読み取り |
RP/0/RSP0/CPU0:router# show subscriber session all RP/0/RSP0/CPU0:router# show subscriber session all summary location 0/1/CPU0 RP/0/RSP0/CPU0:router# show subscriber session filter vrf vrf1 location 0/1/CPU0 RP/0/RSP0/CPU0:router# show subscriber session subscriber-label 40
フィルタ基準に基づいて加入者セッション データベースの検索結果を表示するには、EXEC モードで show subscriber session filter コマンドを使用します。
show subscriber session filter[ interface type interface-path-id| ipv4-address ip_address| mac-address imac_address| state subscriber_state| username user_name| vrf vrf_name ] [ detail| location]
interface | ローカルの加入者インターフェイス名をフィルタリングします。 |
ipv4-address | 加入者の IPv4 アドレスをフィルタリングします。 |
mac-address | 加入者の MAC アドレスをフィルタリングします。 |
state | 加入者セッションのステートをフィルタリングします。 |
username | ユーザ名をフィルタリングします。 |
vrf | 特定の VRF 内の加入者をフィルタリングします。 |
デフォルトの動作または値はありません。
EXEC
リリース | 変更内容 |
---|---|
リリース 4.2.0 |
このコマンドが追加されました。 |
このコマンドを使用するには、適切なタスク ID を含むタスク グループに関連付けられているユーザ グループに属している必要があります。 ユーザ グループの割り当てが原因でコマンドを使用できないと考えられる場合、AAA 管理者に連絡してください。
動的なテンプレート コンフィギュレーション モードを開始するには、dynamic-template コマンドを使用します。
タスク ID | 操作 |
---|---|
network |
読み取り |
config-services |
読み取り |
RP/0/RSP0/CPU0:router# show subscriber session filter interface Bundle-ether100.10 0/1/0/3 RP/0/RSP0/CPU0:router# show subscriber session filter ipv4-address 5.5.5.5 detail location 0/1/CPU0 RP/0/RSP0/CPU0:router# show subscriber session filter mac-address 56.56.5 RP/0/RSP0/CPU0:router# show subscriber session filter username user1 RP/0/RSP0/CPU0:router# show subscriber session filter state t1 RP/0/RSP0/CPU0:router# show subscriber session filter vrf vrf1
コマンド |
説明 |
---|---|
クラスマップをイネーブルにします。 |
|
ポリシーマップをイネーブルにします。 |
|
ポリシーマップのイベントをイネーブルにします。 |