Determinazione del numero di serie dei componenti dello switch Catalyst
Opzioni per il download
Linguaggio senza pregiudizi
La documentazione per questo prodotto è stata redatta cercando di utilizzare un linguaggio senza pregiudizi. Ai fini di questa documentazione, per linguaggio senza di pregiudizi si intende un linguaggio che non implica discriminazioni basate su età, disabilità, genere, identità razziale, identità etnica, orientamento sessuale, status socioeconomico e intersezionalità. Le eventuali eccezioni possono dipendere dal linguaggio codificato nelle interfacce utente del software del prodotto, dal linguaggio utilizzato nella documentazione RFP o dal linguaggio utilizzato in prodotti di terze parti a cui si fa riferimento. Scopri di più sul modo in cui Cisco utilizza il linguaggio inclusivo.
Informazioni su questa traduzione
Cisco ha tradotto questo documento utilizzando una combinazione di tecnologie automatiche e umane per offrire ai nostri utenti in tutto il mondo contenuti di supporto nella propria lingua. Si noti che anche la migliore traduzione automatica non sarà mai accurata come quella fornita da un traduttore professionista. Cisco Systems, Inc. non si assume alcuna responsabilità per l’accuratezza di queste traduzioni e consiglia di consultare sempre il documento originale in inglese (disponibile al link fornito).
Sommario
Introduzione
In questo documento viene descritto come determinare i numeri di serie di vari componenti sostituibili sugli switch Cisco Catalyst.
Prerequisiti
Requisiti
Nessun requisito specifico previsto per questo documento.
Componenti usati
Le informazioni fornite in questo documento si basano sulle seguenti versioni software e hardware:
-
Vari switch Catalyst
-
Varie versioni del software
Le informazioni discusse in questo documento fanno riferimento a dispositivi usati in uno specifico ambiente di emulazione. Su tutti i dispositivi menzionati nel documento la configurazione è stata ripristinata ai valori predefiniti. Se la rete è operativa, valutare attentamente eventuali conseguenze derivanti dall'uso dei comandi.
Convenzioni
Per ulteriori informazioni sulle convenzioni usate, consultare il documento Cisco sulle convenzioni nei suggerimenti tecnici.
Premesse
I numeri di serie sono necessari per creare un database dei componenti della rete. Quando si crea una richiesta di assistenza con il supporto tecnico Cisco, è necessario avere a portata di mano il numero di serie dei dispositivi interessati. Questo requisito si applica in particolare quando è necessario un componente sostitutivo o un'autorizzazione per la restituzione del materiale (RMA).
Non è possibile modificare il numero di serie degli switch Cisco Catalyst. A scopo di gestione, è possibile configurare gli switch Cisco Catalyst con software Cisco IOS® in modo che restituiscano una stringa personalizzata. Per creare una stringa personalizzata, usare il comando snmp-server chassis-id in modalità di configurazione globale.
Nota: per informazioni specifiche sui comandi show, vedere Comandi show.
Catalyst 6500
Per determinare il numero di serie dello chassis e di altri componenti, usare il comando show idprom comando:
6506#show idprom ? all selects all FRU-types backplane specify backplane clock specify clock <number> earl specify earl <slot> fan-tray specify fan-tray <number> interface interface name module specify module <slot> power-supply specify power-supply <number> rp specify RP (MSFC) <slot> supervisor specify supervisor <slot> vtt specify VTT <number>
Per ottenere il numero di serie dello chassis, usare il comando show idprom backplane:
6506#show idprom backplane IDPROM for backplane #0 (FRU is 'Catalyst 6500 6-slot backplane') OEM String = 'Cisco Systems' Product Number = 'WS-C6506' Serial Number = 'TBA03270652' Manufacturing Assembly Number = '73-3436-01' Manufacturing Assembly Revision = 'A0' Hardware Revision = 1.0 Current supplied (+) or consumed (-) = -A
Per ottenere il numero di serie del modulo, usare il comando show idprom module slot<slot number>. In alternativa, è possibile usare il comando show module:
6506#show module Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-S2U-MSFC2 SAD055006NE 3 0 2 port adapter FlexWAN WS-X6182-2PA SAD04350EEU 4 48 SFM-capable 48-port 10/100 Mbps RJ45 WS-X6548-RJ-45 SAD055108C2 Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ------ ------------ ------------ ------- 1 0001.6415.a602 to 0001.6415.a603 3.2 6.1(3) 7.5(0.6)HUB6 Ok 3 0001.6413.c86b to 0001.6413.c8aa 1.5 12.1(13)E1 12.1(13)E1 Ok 4 0001.63d3.e77a to 0001.63d3.e7a9 4.0 6.3(1) 7.5(0.6)HUB6 Ok Mod Sub-Module Model Serial Hw Status --- --------------------------- --------------- --------------- ------- ------- 1 Policy Feature Card 2 WS-F6K-PFC2 SAD055004VA 3.0 Ok 1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAD055006VF 2.0 Ok Mod Online Diag Status --- ------------------- 1 Pass 3 Not Supported 4 Pass
Nota: utilizzare show diagbus per determinare il numero di serie degli adattatori di porte sul modulo Flex WAN.
Catalyst 4500
Catalyst 4500 con Supervisor Engine 2
Sugli switch Catalyst 4500/4000 Supervisor 2, il numero di serie dello chassis è disponibile tramite CLI nelle versioni 5.5(10), 6.3(2) e successive. Nelle versioni precedenti, il comando show version restituisce il numero di serie del Supervisor Engine al posto del numero di serie dello chassis. Per ottenere il numero di serie dello chassis in queste versioni precedenti, controllare l'adesivo esterno sullo chassis.
Catalyst 4500 Supervisor Engine II+/III/IV
Per determinare il numero di serie dello chassis e di altri componenti, usare il comando show idprom:
Switch#show idprom ? all show all non-interface IDPROMs chassis show IDPROM for chassis fan-tray show IDPROM for system fan tray interface show contents of gbic connected to this interface module show IDPROM for module power-supply show IDPROM for power supply supervisor show IDPROM for supervisor
Per ottenere il numero di serie dello chassis, utilizzare il show idprom chassis comando:
Switch#show idprom chassis Chassis Idprom : Common Block Signature = 0xABAB Common Block Version = 1 Common Block Length = 144 Common Block Checksum = 4081 Idprom Size = 256 Block Count = 2 FRU Major Type = 0x4001 FRU Minor Type = 37 OEM String = Cisco Systems, Inc. Product Number = WS-C4506 Serial Number = FOX0627A001 Part Number = 73-8107-04 Part Revision = 01 Manufacturing Deviation String = 0 Hardware Revision = 0.4 Manufacturing Bits = 0x0000 Engineering Bits = 0x0000 Snmp OID = 0.0.0.0.0.0.0.0 Power Consumption = 0 RMA Failure Code = 0 0 0 0 Chassis Block Signature = 0x4001 Chassis Block Version = 1 Chassis Block Length = 22 Chassis Block Checksum = 628 Feature Bits = 0x0000000000000000 MAC Base = 000a.4172.df40 MAC Count = 64
Per ottenere il numero di serie dell'alimentatore, usare il comando show idprom power-supply {1} | 2} comando:
Switch#show idprom power-supply 1 Power Supply 1 Idprom : Common Block Signature = 0xABAB Common Block Version = 1 Common Block Length = 144 Common Block Checksum = 5857 Idprom Size = 256 Block Count = 2 FRU Major Type = 0x4501 FRU Minor Type = 1 OEM String = Cisco Systems, Inc. Product Number = PWR-C4K-1400AC Serial Number = ABC06260005 Part Number = 34-1846-01 Part Revision = 45 Manufacturing Deviation String = Hardware Revision = 1.0 Manufacturing Bits = 0x0000 Engineering Bits = 0x0000 Snmp OID = 22616.22616.22616.22616.22616.22616.22616.22616 Power Consumption = 1400 RMA Failure Code = 0 0 0 0 Power Supply Block Signature = 0x4501 PowerSupply Block Version = 1 PowerSupply Block Length = 20 PowerSupply Block Checksum = 293 Feature Bits = 0x0000000000000000 Current @ 110V = 17 Current @ 220V = 9 StackMIB OID = 22616
Per ottenere il numero di serie del modulo, usare il comando show idprom module slot<slot number>. In alternativa, è possibile utilizzare il comando show module:
Switch#show module Mod Ports Card Type Model Serial No. ----+-----+--------------------------------------+-----------------+----------- 1 2 1000BaseX (GBIC) Supervisor(active) WS-X4014 JAB054109H1 3 48 10/100BaseTX (RJ45) WS-X4148 JAB025202M6 4 6 1000BaseX (GBIC) WS-X4306 JAB023403BG M MAC addresses Hw Fw Sw Status --+--------------------------------+---+------------+----------------+--------- 1 000a.4172.df40 to 000a.4172.df41 0.5 12.1(12r)EW 12.1(13)EW(0.34) Ok 3 0050.730b.2340 to 0050.730b.236f 1.0 Ok 4 0010.7bfa.7ca4 to 0010.7bfa.7ca9 2.0 Ok
Catalyst 3750
Utilizzare il comando show version per determinare il numero di serie dello chassis e il tipo di modello dello switch, come mostrato nell'esempio. L'output contiene tutte le informazioni sui membri dello stack di switch, sullo chassis e sul numero di serie:
3750#show version Cisco Internetwork Operating System Software Cisco IOS (tm) C3750 Software (C3750-I5-M), Version 12.1(14)EA1, RELEASE SOFTWARE (fc1 ) Copyright (c) 1986-2003 by cisco Systems, Inc. Compiled Tue 22-Jul-03 13:17 by antonino Image text-base: 0x00003000, data-base: 0x008F0CF8 ROM: Bootstrap program is C3750 boot loader BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.1(11r)AX, RELEASE SOFTWARE (fc1) 3750RJ uptime is 1 hour, 29 minutes System returned to ROM by power-on System image file is "flash:c3750-i5-mz.121.14-EA1/c3750-i5-mz.121.14-EA1.bin" cisco WS-C3750-24TS (PowerPC405) processor (revision A0) with 120822K/10240K byt es of memory. Processor board ID CAT0726R0ZU Last reset from power-on Bridging software. 2 Virtual Ethernet/IEEE 802.3 interface(s) 48 FastEthernet/IEEE 802.3 interface(s) 16 Gigabit Ethernet/IEEE 802.3 interface(s) The password-recovery mechanism is enabled. 512K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address : 00:0D:29:B4:18:00 Motherboard assembly number : 73-7055-06 Power supply part number : 341-0034-01 Motherboard serial number : CAT0726043V Power supply serial number : PHI0708009K Model revision number : A0 Motherboard revision number : A0 Model number : WS-C3750-24TS-E System serial number : CAT0726R0ZU Switch Ports Model SW Version SW Image ------ ----- ----- ---------- ---------- * 1 26 WS-C3750-24TS 12.1(14)EA1 C3750-I5-M 2 26 WS-C3750-24TS 12.1(14)EA1 C3750-I5-M 3 12 WS-C3750G-12S 12.1(14)EA1 C3750-I5-M Switch 02 --------- Switch Uptime : 1 hour, 29 minutes Base ethernet MAC Address : 00:0D:29:B4:3F:00 Motherboard assembly number : 73-7055-06 Power supply part number : 341-0034-01 Motherboard serial number : CAT07260438 Power supply serial number : PHI0708008X Model revision number : A0 Motherboard revision number : A0 Model number : WS-C3750-24TS-E System serial number : CAT0726R10A Switch 03 --------- Switch Uptime : 1 hour, 29 minutes Base ethernet MAC Address : 00:0D:BD:6A:3E:00 Motherboard assembly number : 73-8307-06 Power supply part number : 341-0048-01 Motherboard serial number : CAT073205S2 Power supply serial number : DTH0731055Z Model revision number : A0 Motherboard revision number : A0 Model number : WS-C3750G-12S-E System serial number : CAT0732R0M4 Top assembly part number : 800-23419-01 Top assembly revision number : A0 Configuration register is 0xF 3750#
Catalyst 3560
Per determinare il numero di serie dello chassis e il tipo di modello dello switch, usare il comando show version:
3560#show version Cisco Internetwork Operating System Software Cisco IOS (tm) C3560 Software (C3560-I5-M), Version 12.1(19)EA1c, RELEASE SOFTWARE (fc 2) Copyright (c) 1986-2004 by cisco Systems, Inc. Compiled Tue 03-Feb-04 05:56 by yenanh Image text-base: 0x00003000, data-base: 0x0091D404 ROM: Bootstrap program is C3560 boot loader BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.1(19r)EA1b, RELEASE SOFTWA RE (fc2) 3-8-03-CATS3560 uptime is 8 weeks, 4 days, 18 hours, 16 minutes System returned to ROM by power-on System image file is "flash:c3560-i5-mz.121-19.EA1c.bin" cisco WS-C3560-24PS (PowerPC405) processor (revision D0) with 118776K/12288K byt es of memory. Processor board ID CSG0802P0G4 Last reset from power-on Bridging software. 1 Virtual Ethernet/IEEE 802.3 interface(s) 24 FastEthernet/IEEE 802.3 interface(s) 2 Gigabit Ethernet/IEEE 802.3 interface(s) The password-recovery mechanism is enabled. 512K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address : 00:0E:39:E9:32:80 Motherboard assembly number : 73-9299-01 Power supply part number : 341-0029-03 Motherboard serial number : CAT075108EK Power supply serial number : LIT074900K3 Model revision number : D0 Motherboard revision number : C0 Model number : WS-C3560-24PS-E System serial number : CSG0802P0G4 Top Assembly Part Number : 800-24814-01 Top Assembly Revision Number : D0 Version ID : N/A Hardware Board Revision Number : 0x08
Catalyst 3550
Per determinare il numero di serie dello chassis e il tipo di modello dello switch, usare il comando show version:
Cat3550#show version
Cisco Internetwork Operating System Software
Cisco IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version 12.1(12c)EA1, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Mon 25-Nov-02 00:07 by antonino
Image text-base: 0x00003000, data-base: 0x0075FE48
ROM: Bootstrap program is C3550 boot loader
Cat3550 uptime is 4 days, 2 hours, 57 minutes
System returned to ROM by power-on
System image file is "flash:c3550-i5q3l2-mz.121-12c.EA1.bin"
cisco WS-C3550-48 (PowerPC) processor (revision G0) with 65526K/8192K bytes of memory.
Processor board ID CHK0642W02B
Last reset from warm-reset
Bridging software.
Running Layer2/3 Switching Image
Ethernet-controller 1 has 12 Fast Ethernet/IEEE 802.3 interfaces
Ethernet-controller 2 has 12 Fast Ethernet/IEEE 802.3 interfaces
Ethernet-controller 3 has 12 Fast Ethernet/IEEE 802.3 interfaces
Ethernet-controller 4 has 12 Fast Ethernet/IEEE 802.3 interfaces
Ethernet-controller 5 has 1 Gigabit Ethernet/IEEE 802.3 interface
Ethernet-controller 6 has 1 Gigabit Ethernet/IEEE 802.3 interface
48 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
The password-recovery mechanism is enabled.
384K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0B:46:8A:2F:80
Motherboard assembly number: 73-5701-07
Power supply part number: 34-0967-01
Motherboard serial number: CAT0641027L
Power supply serial number: DCA06392BU2
Model revision number: G0
Motherboard revision number: A0
Model number: WS-C3550-48-SMI
System serial number: CHK0642W02B
Configuration register is 0x10F
Catalyst 2950/2970/2940
Per determinare il numero di serie dello chassis e il tipo di switch, utilizzare il show version comando:
Cat2950#show version Cisco Internetwork Operating System Software Cisco IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(12c)EA1, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Sun 24-Nov-02 23:31 by antonino Image text-base: 0x80010000, data-base: 0x80562000 ROM: Bootstrap program is CALHOUN boot loader Cat2950 uptime is 4 days, 2 hours, 52 minutes System returned to ROM by power-on System image file is "flash:c2950-i6q4l2-mz.121-12c.EA1.bin" cisco WS-C2950G-48-EI (RC32300) processor (revision C0) with 21002K bytes of memory. Processor board ID FHK0624W0HS Last reset from system-reset Running Enhanced Image 48 FastEthernet/IEEE 802.3 interface(s) 2 Gigabit Ethernet/IEEE 802.3 interface(s) 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 00:09:E8:89:4A:40 Motherboard assembly number: 73-7409-08 Power supply part number: 34-0965-01 Motherboard serial number: FOC06230ERQ Power supply serial number: DAB062143BP Model revision number: C0 Motherboard revision number: B0 Model number: WS-C2950G-48-EI System serial number: FHK0624W0HS Configuration register is 0xF
Catalyst 2900XL/3500XL
Per determinare il numero di serie dello chassis e il tipo di switch, utilizzare il show version comando:
Switch#show version Cisco Internetwork Operating System Software Cisco IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5.2)XU, MAINTENANCE INTERIM SOFTWARE Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Mon 17-Jul-00 18:29 by ayounes Image text-base: 0x00003000, data-base: 0x00301F3C ROM: Bootstrap program is C3500XL boot loader Switch uptime is 4 days, 3 hours, 4 minutes System returned to ROM by power-on System image file is "flash:c3500XL-c3h2s-mz-120.5.2-XU.bin" Cisco WS-C3548-XL (PowerPC403) processor (revision 0x01) with 16384K/1024K bytes of memory. Processor board ID FOC0616X0RG, with hardware revision 0x00 Last reset from power-on Processor is running Enterprise Edition Software Cluster command switch capable Cluster member switch capable 48 FastEthernet/IEEE 802.3 interface(s) 2 Gigabit Ethernet/IEEE 802.3 interface(s) 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 00:09:7C:8E:78:80 Motherboard assembly number: 73-3903-09 Power supply part number: 34-0971-02 Motherboard serial number: FOC06160L07 Power supply serial number: APQ061200VZ Model revision number: M0 Motherboard revision number: A0 Model number: WS-C3548-XL-EN System serial number: FOC0616X0RG Configuration register is 0xF
Catalyst 2948GL3/4908G-L3/4980G-L3
Per determinare il numero di serie dello chassis, utilizzare il show hardware comando:
2948g-l3#show hardware
Model: Cat-2948G-L3 Date: 17:49:42 UTC Tue Mar 18 2003
XPIF FPGA File: xpif_fpga_0_72b_CClk.rbt
XPIF FPGA Date: Wed Dec 8 17:05:42 1999
Slot 0/0:
Chip 0 Reset Count: 0 Chip 1 Reset Count: 0
Chip 2 Reset Count: 0 Chip 3 Reset Count: 0
Chip 4 Reset Count: 0 Chip 5 Reset Count: 0
Chip 6 Reset Count: 0 Chip 7 Reset Count: 0
Chip 8 Reset Count: 0 Chip 9 Reset Count: 0
Chip 10 Reset Count: 0 Chip 11 Reset Count: 0
EPIF Version : 0 CAM size: 32 KB
Ucode Version : 1.0
Ucode Image : EPIF_UCODE_RUNTIME
Port Phy Setup
Port1 :DONE Port2 :DONE Port3 :DONE Port4 :DONE
Port5 :DONE Port6 :DONE Port7 :DONE Port8 :DONE
Port9 :DONE Port10:DONE Port11:DONE Port12:DONE
Port13:DONE Port14:DONE Port15:DONE Port16:DONE
Port17:DONE Port18:DONE Port19:DONE Port20:DONE
Port21:DONE Port22:DONE Port23:DONE Port24:DONE
Port25:DONE Port26:DONE Port27:DONE Port28:DONE
Port29:DONE Port30:DONE Port31:DONE Port32:DONE
Port33:DONE Port34:DONE Port35:DONE Port36:DONE
Port37:DONE Port38:DONE Port39:DONE Port40:DONE
Port41:DONE Port42:DONE Port43:DONE Port44:DONE
Port45:DONE Port46:DONE Port47:DONE Port48:DONE
Slot 0/1:
XPIF Version : 0 CAM size: 128 KB
Ucode Version : 1.0
Ucode Image : XPIF_UCODE_RUNTIME
Port Phy Setup
Port49:DONE Port50:DONE
IDPROM Contents :
FRU Type : 0x0.0x0
OEM String : Cisco_Systems
Product Number : WS-C2948G-L3
Serial Number : FOX05330ADH
Mfg. Assembly No. : 73-4083-07
Mfg. Assembly Ver. : A0
Hardware Version : 1.7
FPGA Version : 0
SNMP IOD : 9.5.1.3.1.1.2.275
RMA Code : 0
Feature Bits : 0x00000000
MAC Address Base : 00:07:85:07:DC:00
Total MAC Addrs. : 1024
Catalyst 9000
Per determinare il numero di serie dello chassis, usare il comando show version. In alternativa, è possibile utilizzare il comando show module per visualizzare un output più piccolo:
C9300#show version Cisco IOS XE Software, Version 17.06.04 Cisco IOS Software [Bengaluru], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 17.6.4, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2022 by Cisco Systems, Inc. Compiled Sun 14-Aug-22 08:58 by mcpre Cisco IOS-XE software, Copyright (c) 2005-2022 by cisco Systems, Inc. All rights reserved. Certain components of Cisco IOS-XE software are licensed under the GNU General Public License ("GPL") Version 2.0. The software code licensed under GPL Version 2.0 is free software that comes with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such GPL code under the terms of GPL Version 2.0. For more details, see the documentation or "License Notice" file accompanying the IOS-XE software, or the applicable URL provided on the flyer accompanying the IOS-XE software. ROM: IOS-XE ROMMON BOOTLDR: System Bootstrap, Version 17.8.1r[FC2], RELEASE SOFTWARE (P) C9300 uptime is 1 week, 2 days, 17 hours, 51 minutes Uptime for this control processor is 1 week, 2 days, 17 hours, 54 minutes System returned to ROM by Reload Command at 07:14:20 jst Wed Aug 2 2023 System restarted at 07:29:56 jst Wed Aug 2 2023 System image file is "flash:packages.conf" Last reload reason: Reload Command This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. Technology Package License Information: ------------------------------------------------------------------------------ Technology-package Technology-package Current Type Next reboot ------------------------------------------------------------------------------ network-advantage Smart License network-advantage dna-advantage Subscription Smart License dna-advantage AIR License Level: AIR DNA Advantage Next reload AIR license Level: AIR DNA Advantage Smart Licensing Status: Registration Not Applicable/Not Applicable cisco C9300-24UX (X86) processor with 1317097K/6147K bytes of memory. Processor board ID FJC2325E0HB 5 Virtual Ethernet interfaces 8 Gigabit Ethernet interfaces 64 Ten Gigabit Ethernet interfaces 4 TwentyFive Gigabit Ethernet interfaces 4 Forty Gigabit Ethernet interfaces 2048K bytes of non-volatile configuration memory. 8388608K bytes of physical memory. 1638400K bytes of Crash Files at crashinfo:. 11264000K bytes of Flash at flash:. Base Ethernet MAC Address : c4:c6:03:9a:bd:80 Motherboard Assembly Number : 73-18276-03 Motherboard Serial Number : FJZ23210BTF Model Revision Number : D0 Motherboard Revision Number : B0 Model Number : C9300-24UX System Serial Number : FJC2325E0HB CLEI Code Number : Switch Ports Model SW Version SW Image Mode ------ ----- ----- ---------- ---------- ---- * 1 41 C9300-24UX 17.06.04 CAT9K_IOSXE INSTALLC9300#show module Switch Ports Model Serial No. MAC address Hw Ver. Sw Ver. ------ ----- --------- ----------- -------------- ------- -------- 1 41 C9300-24UX FJC2325E0HB c4c6.039a.bd80 V02 17.06.04 C9300#
Informazioni correlate
Cronologia delle revisioni
| Revisione | Data di pubblicazione | Commenti |
|---|---|---|
2.0 |
11-Aug-2023 |
Certificazione |
1.0 |
19-Mar-2003 |
Versione iniziale |
Contributo dei tecnici Cisco
- Julio JimenezCisco TAC Engineer
Feedback