Risoluzione dei problemi relativi alla funzionalità PoE sugli Smart Switch Cisco serie C9350

Opzioni per il download

  • PDF     (281.1 KB)
    Visualizza con Adobe Reader su diversi dispositivi
Aggiornato:31 marzo 2026
ID documento:225682

Linguaggio senza pregiudizi

La documentazione per questo prodotto è stata redatta cercando di utilizzare un linguaggio senza pregiudizi. Ai fini di questa documentazione, per linguaggio senza di pregiudizi si intende un linguaggio che non implica discriminazioni basate su età, disabilità, genere, identità razziale, identità etnica, orientamento sessuale, status socioeconomico e intersezionalità. Le eventuali eccezioni possono dipendere dal linguaggio codificato nelle interfacce utente del software del prodotto, dal linguaggio utilizzato nella documentazione RFP o dal linguaggio utilizzato in prodotti di terze parti a cui si fa riferimento. Scopri di più sul modo in cui Cisco utilizza il linguaggio inclusivo.

Informazioni su questa traduzione

Cisco ha tradotto questo documento utilizzando una combinazione di tecnologie automatiche e umane per offrire ai nostri utenti in tutto il mondo contenuti di supporto nella propria lingua. Si noti che anche la migliore traduzione automatica non sarà mai accurata come quella fornita da un traduttore professionista. Cisco Systems, Inc. non si assume alcuna responsabilità per l’accuratezza di queste traduzioni e consiglia di consultare sempre il documento originale in inglese (disponibile al link fornito).

    Introduzione

    In questo documento viene descritto come raccogliere e acquisire gli output e i log per risolvere i problemi relativi a Power over Ethernet (PoE) sugli Smart Switch Cisco serie C9350.

    Panoramica delle funzionalità PoE su C9350

    SKU PoE C9350

    Prodotti C9350​

    Numero di porte PoE​

    Potenza massima PoE per porta​

    C9350-48HX​

    48

    90

    C9350-48U​

    48

    60

    C9350-24U​

    24

    60

    C9350-48P​

    48

    30

    C9350-24P​

    24

    30


    Novità di C9350 PoE

    • Supporta fino a 90 W su tutte le porte nelle unità C9350-HX
      (in precedenza era disponibile solo su 32 porte in C9300X/H, a causa dei limiti del budget energetico).

    • Tre slot di alimentazione (fino a 2 in C9300).
      Questo aumenta il budget energetico PoE disponibile che consente agli switch C9350-48HX di fornire fino a 90 W su tutte le 48 porte.

    • Firmware compatibile con BT True Institute of Electrical and Electronics Engineers (IEEE)
      Nessuna conversione dalla modalità AT alla modalità BT e viceversa. Lo stesso firmware BT funziona in modalità a 2 doppini in SKU da 30 W e in modalità a 4 doppini in SKU da 60 W e 90 W (il comando upoe-plus è deprecato).  

    • Immagine MCU (Unified Microcontroller Unit) (bitstream hardware MCU, bootloader e applicazione software in un unico binario).
      In Catalyst 9300, ognuna di queste immagini era separata e occupava 360 secondi per immagine; l'aggiornamento sarebbe stato eseguito in sequenza.

    • Aggiornamento dall'interfaccia I2C all'interfaccia SPI sulla MCU.
      Ciò consente un aggiornamento più rapido del software MCU di circa 110 secondi (in precedenza erano circa 360 secondi per immagine su Catalyst 9300).
      L'interfaccia SPI è più veloce di I2C e ci consente di apportare miglioramenti futuri in grado di ottimizzare la funzionalità PoE in generale.

    • Interfaccia MCU UART.
      In questo modo è possibile ottenere i log di debug dalla MCU (non è necessario fare affidamento sui dump di istantanee o registri personalizzati con le immagini di debug).


    Funzionalità avanzate di disponibilità per la risoluzione dei problemi e la raccolta dei log su C9350

    Sul sistema C9350 sono implementate nuove funzionalità di disponibilità per la risoluzione dei problemi PoE che consentono di individuare la causa principale dei problemi sul campo in modo più affidabile e rapido.

    Dati di registro del controller PoE integrati nella CLI PoE "show tech-support"

    show platform front-controller read-poe <poe_controller#> module <modulo#>

    C9350-24U_SWITCH#show tech-support poe | redirect flash:show_tech_poe_27Jan2026.txt 
    C9350-24U_SWITCH#more flash:show_tech_poe_27Jan2026.txt | include --- show
    ------------------ show clock ------------------
    ------------------ show switch ------------------
    ------------------ show module ------------------
    ------------------ show version ------------------
    ------------------ show running-config ------------------
    ------------------ show env all ------------------
    ------------------ show power inline ------------------
    ------------------ show power inline police ------------------
    ------------------ show interface status ------------------
    ------------------ show platform software ilpower details ------------------
    ------------------ show stack-power budgeting ------------------
    ------------------ show stack-power detail ------------------
    ------------------ show controllers ethernet-controller phy detail ------------------
    ------------------ show controllers power inline ------------------
    ------------------ show cdp neighbors detail ------------------
    ------------------ show lldp neighbors detail ------------------
    ------------------ show interface ------------------
    ------------------ show log ------------------
    ------------------ show power inline priority ------------------
    ------------------ show post ------------------
    ------------------ show controllers power inline module 1 ------------------
    ------------------ show platform frontend-controller version 0 1 ------------------
    ------------------ show platform frontend-controller manager 0 1 ------------------
    ------------------ show platform frontend-controller subordinate 0 1 ------------------
    ------------------ show platform hardware fed switch 1 fwd-asic register read register-name pimdeviceid ------------------
    ------------------ show platform software trace message chassis-manager switch 1 R0 ------------------
    ------------------ show platform software trace message fed switch 1 ------------------
    ------------------ show platform software ilpower system 1 ------------------
    ------------------ show power inline Gi1/0/1 detail ------------------
    ------------------ show power inline Gi1/0/2 detail ------------------
    ------------------ show power inline Gi1/0/3 detail ------------------
    ------------------ show power inline Gi1/0/4 detail ------------------
    ------------------ show power inline Gi1/0/5 detail ------------------
    ------------------ show power inline Gi1/0/6 detail ------------------
    ------------------ show power inline Gi1/0/7 detail ------------------
    ------------------ show power inline Gi1/0/8 detail ------------------
    ------------------ show power inline Gi1/0/9 detail ------------------
    ------------------ show power inline Gi1/0/10 detail ------------------
    ------------------ show power inline Gi1/0/11 detail ------------------
    ------------------ show power inline Gi1/0/12 detail ------------------
    ------------------ show power inline Gi1/0/13 detail ------------------
    ------------------ show power inline Gi1/0/14 detail ------------------
    ------------------ show power inline Gi1/0/15 detail ------------------
    ------------------ show power inline Gi1/0/16 detail ------------------
    ------------------ show power inline Gi1/0/17 detail ------------------
    ------------------ show power inline Gi1/0/18 detail ------------------
    ------------------ show power inline Gi1/0/19 detail ------------------
    ------------------ show power inline Gi1/0/20 detail ------------------
    ------------------ show power inline Gi1/0/21 detail ------------------
    ------------------ show power inline Gi1/0/22 detail ------------------
    ------------------ show power inline Gi1/0/23 detail ------------------
    ------------------ show power inline Gi1/0/24 detail ------------------
    ------------------ show platform frontend-controller read-poe 1 module 1 ------------------ 
    ------------------ show platform frontend-controller read-poe 2 module 1 ------------------
    ------------------ show platform frontend-controller read-poe 3 module 1 ------------------
    ------------------ show platform frontend-controller read-poe 4 module 1 ------------------
    ------------------ show platform frontend-controller read-poe 5 module 1 ------------------
    ------------------ show platform frontend-controller read-poe 6 module 1 ------------------
    ------------------ show platform frontend-controller read-poe 7 module 1 ------------------
    ------------------ show platform frontend-controller read-poe 8 module 1 ------------------
    ------------------ show platform frontend-controller read-poe 9 module 1 ------------------
    ------------------ show platform frontend-controller read-poe 10 module 1 ------------------
    ------------------ show platform frontend-controller read-poe 11 module 1 ------------------
    ------------------ show platform frontend-controller read-poe 12 module 1 ------------------
    C9350-24U_SWITCH#

    Registrazione a una porta

    • Questa funzione aiuta a raccogliere i log relativi a una porta specifica.
    • Questa funzionalità è persistente tramite ricaricamenti fino a quando non viene disabilitata esplicitamente tramite CLI.
    • Gli output di log vengono memorizzati nei file di log di traccia di gestione chassis (comando)
    • L'infrastruttura di registrazione può essere eccessiva. Verificare che la funzionalità sia disabilitata al termine della raccolta dei log di debug. In caso contrario, le tracce dei comandi potrebbero essere riempite con i log PoE della porta specifica al termine della risoluzione dei problemi.
    • Per abilitare la registrazione su una porta:
    Switch#set platform software ilpower switch <switch number> r0 logging <port number> level <basic|detail>
    Switch#set platform software ilpower switch <switch number> r0 logging <port number> action <start|stop>

    << sample btrace log collection on a working PoE port >>
    
C9350-24U_SWITCH#sh runn int gi1/0/10
Building configuration...

Current configuration : 49 bytes
!
interface GigabitEthernet1/0/10
 shutdown
end

C9350-24U_SWITCH#
C9350-24U_SWITCH#show power inline gi1/0/10
Interface Admin  Oper       Power   Device              Class Max
                            (Watts)                            
--------- ------ ---------- ------- ------------------- ----- ----
Gi1/0/10  auto   off        0.0     n/a                 n/a   60.0 
C9350-24U_SWITCH#


C9350-24U_SWITCH#
C9350-24U_SWITCH#set platform software ilpower switch 1 r0 logging 10 level ?
  basic   Basic level logging
  detail  Detailed level logging

C9350-24U_SWITCH#
C9350-24U_SWITCH#set platform software ilpower switch 1 r0 logging 10 level detail
Inline power port level logging configured for port 10
C9350-24U_SWITCH#


C9350-24U_SWITCH#sh clock
*10:20:20.609 UTC Fri Jan 23 2026
C9350-24U_SWITCH#

C9350-24U_SWITCH#
C9350-24U_SWITCH#set platform software ilpower switch 1 r0 logging action start
Inline power port level logging enabled
C9350-24U_SWITCH#

C9350-24U_SWITCH#
C9350-24U_SWITCH#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
C9350-24U_SWITCH(config)#int g1/0/10
C9350-24U_SWITCH(config-if)#no sh
C9350-24U_SWITCH(config-if)#no shutdown 
C9350-24U_SWITCH(config-if)#end
*Jan 23 10:20:53.297: %ILPOWER-5-DETECT: Interface Gi1/0/10: Power Device detected: IEEE PD
C9350-24U_SWITCH#
*Jan 23 10:20:53.297: %ILPOWER-6-SET_AVAILABLE_ILPOWER: Available POE budget for switch 1 is updated. New available POE budget = 1310.0 Watts
*Jan 23 10:20:54.048: %SYS-5-CONFIG_I: Configured from console by console
*Jan 23 10:20:54.125: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/10, changed state to down
*Jan 23 10:20:55.296: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/10: Power granted
C9350-24U_SWITCH#
C9350-24U_SWITCH#
*Jan 23 10:21:12.948: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/10, changed state to up
*Jan 23 10:21:13.947: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/10, changed state to up
C9350-24U_SWITCH#
C9350-24U_SWITCH#
*Jan 23 10:21:24.299: %ILPOWER-5-PWRGOOD_SPARE_PAIR: Interface Gi1/0/10: spare pair power good
*Jan 23 10:21:24.615: %ILPOWER-6-SET_AVAILABLE_ILPOWER: Available POE budget for switch 1 is updated. New available POE budget = 1328.9 Watts
*Jan 23 10:21:25.841: %ILPOWER-6-SET_AVAILABLE_ILPOWER: Available POE budget for switch 1 is updated. New available POE budget = 1329.2 Watts
C9350-24U_SWITCH#
C9350-24U_SWITCH#
C9350-24U_SWITCH#
C9350-24U_SWITCH#show power inline gi1/0/10
Interface Admin  Oper       Power   Device              Class Max
                            (Watts)                            
--------- ------ ---------- ------- ------------------- ----- ----
Gi1/0/10  auto   on         10.8    IP Phone 9951       4     60.0 
C9350-24U_SWITCH#
C9350-24U_SWITCH#          
C9350-24U_SWITCH#set platform software ilpower switch 1 r0 logging action stop 
Inline power port level logging disabled
C9350-24U_SWITCH#


C9350-24U_SWITCH#
C9350-24U_SWITCH#
C9350-24U_SWITCH#show logging process cmand
Logging display requested on 2026/01/23 10:22:32 (UTC) for Hostname: [C9350-24U_SWITCH], Model: [C9350-24U], Version: [17.18.01], SN: [FVH29363EA4], MD_SN: [FVH2939LAHY]

Displaying logs from the last 0 days, 0 hours, 10 minutes, 0 seconds
executing cmd on chassis: 1; rp slot: 0;  location: local ...
Unified Decoder Library Init .. DONE
Found 1 UTF Streams

2026/01/23 10:20:48.689503387 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe_get_pwr_sense[POE_GET_POWER_SENSE]:sub_addr 0
2026/01/23 10:20:48.689518893 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe_get_pwr_sense[POE_GET_POWER_SENSE]:sub_addr 14
2026/01/23 10:20:48.689538070 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): POWER_SENSE_CALLBACK #0 port_mapx 0x0 police_map 0x0 start_ppn 1
2026/01/23 10:20:48.689551248 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): POWER_SENSE_CALLBACK #0 port_mapx 0x0 police_map 0x0 start_ppn 13
2026/01/23 10:20:52.126411347 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_detect[POE_AUTO]:ppn 10(9), sub_addr 0 ppn 10
2026/01/23 10:20:52.126447840 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 poe_lite received POE_AUTO port 10(18) portFlag 0 AllocatedPwr 0 msg[2] 0
2026/01/23 10:20:52.126461454 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 P10(18) St SHUT Ev POE_AUTO
2026/01/23 10:20:52.126470725 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 P10(18) command POE_AUTO
2026/01/23 10:20:52.126479263 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 ##AutoDet port 10(18)
2026/01/23 10:20:52.126487198 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 #*# Calling EnterAutoDet port 10(18) override = 1 
2026/01/23 10:20:52.126508214 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Sending override 1 port 10(18) AUTO_DET which_port 3
2026/01/23 10:20:52.126518186 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Sending POE_AUTO ppn 10(18)
2026/01/23 10:20:52.131624642 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 got reply cmd POE_AUTO len 0 for ppn 10
2026/01/23 10:20:52.675581516 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Port 10(18) ConnCheck SS_PD
2026/01/23 10:20:52.675593817 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 AUTODET alchemy 0 ipr_set_flag 0 port 10(18)
2026/01/23 10:20:52.675601825 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 set interrupt for upper layer for alchemy 0 IPR0 8 IPR1 0 port 10(18)
2026/01/23 10:20:52.675612377 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 port 10(18) detected class 4 curr detection 4 conn Chk 1              <---- PD Class detection
2026/01/23 10:20:52.675628214 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 AUTODET_SPARE alchemy 0 ipr_set_flag 1 port 10(19)
2026/01/23 10:20:52.675635631 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 port 10(19) detected class 0 curr detection 0 conn Chk 1
2026/01/23 10:20:53.296919219 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 GetEvt:SSPD port 10(18) CurrState 1 CurrDetection 4
2026/01/23 10:20:53.296929611 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 P10(18) State AUTODET - PEND
2026/01/23 10:20:53.296941387 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Signal pair Evt 12  port 10(18) ConnChk 1
2026/01/23 10:20:53.296957972 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 RE_POE_EVENT 12 [CLASS4] on port 10
2026/01/23 10:20:53.298452740 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 32 alloc_pwr 30W    <---- Initial 30W allocation on the port, based on PD class
2026/01/23 10:20:53.298471493 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 30 factor 32 signal_power 0 spare_power 0
2026/01/23 10:20:53.298480242 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Port 10(18) (60/90w BT) set class PCUT alloc_pwr 30 curr_state != PWRG signal_state 2 spare_state 7
2026/01/23 10:20:53.298969050 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_ieee_pwr_resp[POE_APPROVE]: ppn 10(9), sub_addr 0 ppn 10 allocated_powe 30
2026/01/23 10:20:53.298982584 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 poe_lite received POE_APPROVE port 10(18) portFlag 0 AllocatedPwr 30 msg[2] 30
2026/01/23 10:20:53.298992385 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 P10(18) St PEND Ev POE_APPROVE
2026/01/23 10:20:53.299000345 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 P10(18) Got APPROVE Command:Curr State: PEND
2026/01/23 10:20:53.299008271 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 P10(18) Signal pair Poweron_IeeePD
2026/01/23 10:20:53.299017875 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 IEE_POE_PWR_ON port 10(18) SSPD:pwr on SignalPort Allocated 30 class_val 4
2026/01/23 10:20:53.299025406 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Port 10(18):Disabling 4P ilim/Pcut 4P_OP_Config Reg 0x2d to 0x0
2026/01/23 10:20:53.299125162 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:20:53.299170516 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 32 alloc_pwr 30W
2026/01/23 10:20:53.299205659 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:20:53.299244221 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 32 alloc_pwr 30W
2026/01/23 10:20:53.299277286 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:20:53.299314212 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 32 alloc_pwr 30W
2026/01/23 10:20:53.301891274 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 P10(18) allocated_pwr 30W which_port 1 , is_30w 0 State PEND - IEEE_POWERON
2026/01/23 10:20:53.301901034 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Sending POE_APPROVE ppn 10(18)
2026/01/23 10:20:53.305323953 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 got reply cmd POE_APPROVE len 0 for ppn 10
2026/01/23 10:20:53.305347756 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:20:53.305356903 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 30 factor 32 signal_power 0 spare_power 0
2026/01/23 10:20:53.305370040 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Port 10(18) (60/90w BT) set class PCUT alloc_pwr 30 curr_state != PWRG signal_state 4 spare_state 7
2026/01/23 10:20:53.305378512 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:20:53.305386913 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 30 factor 32 signal_power 0 spare_power 0
2026/01/23 10:20:53.305394249 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Port 10(18) (60/90w BT) set class PCUT alloc_pwr 30 curr_state != PWRG signal_state 4 spare_state 7
2026/01/23 10:20:53.305406255 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:20:53.305414696 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 30 factor 32 signal_power 0 spare_power 0
2026/01/23 10:20:53.305422332 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Port 10(18) (60/90w BT) set class PCUT alloc_pwr 30 curr_state != PWRG signal_state 4 spare_state 7
2026/01/23 10:20:53.950355766 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Port 10(18) ConnCheck SS_PD
2026/01/23 10:20:53.950367359 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 state#1 PWR port 10(18)
2026/01/23 10:20:53.950375549 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 AUTODET_SPARE alchemy 0 ipr_set_flag 0 port 10(19)
2026/01/23 10:20:53.950383251 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 set interrupt for upper layer for alchemy 0 IPR0 8 IPR1 0 port 10(19)
2026/01/23 10:20:53.950393459 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 port 10(19) detected class 0 curr detection 0 conn Chk 1
2026/01/23 10:20:54.487897374 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Port 10(18) ConnCheck SS_PD
2026/01/23 10:20:54.487908264 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 state#1 PWR port 10(18)
2026/01/23 10:20:54.487916551 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 AUTODET_SPARE alchemy 0 ipr_set_flag 0 port 10(19)
2026/01/23 10:20:54.487924497 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 set interrupt for upper layer for alchemy 0 IPR0 8 IPR1 0 port 10(19)
2026/01/23 10:20:54.487933966 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 port 10(19) detected class 0 curr detection 0 conn Chk 1
2026/01/23 10:20:54.925917874 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Got PWRGood PWR port 10(18)
2026/01/23 10:20:54.928723879 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Setting PCUT P10(18) after power_on alloc_powr 30
2026/01/23 10:20:54.928734395 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SSPD: class 4 4P:PCUT reg 0x2B ppn 10(18), bits 60 alloc_pwr 30 pcut1 0
2026/01/23 10:20:54.931603151 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SSPD: class 4 4P:PCUT reg 0x20 ppn 10(18), bit_val 60 alloc_pwr 30(sig 60) pcut1 60
2026/01/23 10:20:54.934410290 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 P10(18) State PWR - PGOOD [AssigC 4 ReqC  4]                                             <----- Power Good
2026/01/23 10:20:55.296578019 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Signal pair Evt 1  port 10(18) ConnChk 1
2026/01/23 10:20:55.296595839 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 RE_POE_EVENT 1 [PWR_GOOD] on port 10
2026/01/23 10:20:56.620237271 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 199 msb 3
2026/01/23 10:20:57.040914750 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 163 msb 3
2026/01/23 10:20:57.463796249 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 176 msb 3
2026/01/23 10:20:57.886470191 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 176 msb 3
2026/01/23 10:20:58.309246877 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 173 msb 3
2026/01/23 10:20:58.689977359 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe_get_pwr_sense[POE_GET_POWER_SENSE]:sub_addr 0
2026/01/23 10:20:58.689992754 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe_get_pwr_sense[POE_GET_POWER_SENSE]:sub_addr 14
2026/01/23 10:20:58.690011267 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): POWER_SENSE_CALLBACK #0 port_mapx 0x200 police_map 0x0 start_ppn 1
2026/01/23 10:20:58.690022359 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 port 10 power 3187 sig_power 3187 sp_power 0 min 3187 max 3187 over_draw 0 pwr->v 55924 pwr->i 57
2026/01/23 10:20:58.690047165 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): POWER_SENSE_CALLBACK #0 port_mapx 0x0 police_map 0x0 start_ppn 13
2026/01/23 10:20:58.732273956 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 173 msb 3
2026/01/23 10:20:59.153644777 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 172 msb 3
2026/01/23 10:20:59.576018028 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 176 msb 3
2026/01/23 10:20:59.998579904 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 173 msb 3
2026/01/23 10:21:00.421013727 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 170 msb 3
2026/01/23 10:21:00.842362071 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 166 msb 3
2026/01/23 10:21:01.263014284 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 171 msb 3
2026/01/23 10:21:01.685124698 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 170 msb 3
2026/01/23 10:21:02.108248559 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 153 msb 3
2026/01/23 10:21:02.530359554 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 198 msb 3
2026/01/23 10:21:02.952535591 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 196 msb 3
2026/01/23 10:21:03.374300339 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 197 msb 3
2026/01/23 10:21:03.795328274 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 195 msb 3
2026/01/23 10:21:04.217233802 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 203 msb 3
2026/01/23 10:21:04.638657898 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 202 msb 3
2026/01/23 10:21:05.061469754 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 228 msb 3
2026/01/23 10:21:05.483228326 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 26 msb 4
2026/01/23 10:21:05.906366138 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 167 msb 4
2026/01/23 10:21:06.327792601 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 51 msb 5
2026/01/23 10:21:06.780668214 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 6 msb 5
2026/01/23 10:21:07.201665328 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 13 msb 5
2026/01/23 10:21:07.623403411 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 54 msb 5
2026/01/23 10:21:08.046028174 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 83 msb 5
2026/01/23 10:21:08.467758410 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 84 msb 5
2026/01/23 10:21:08.690285776 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe_get_pwr_sense[POE_GET_POWER_SENSE]:sub_addr 0
2026/01/23 10:21:08.690299555 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe_get_pwr_sense[POE_GET_POWER_SENSE]:sub_addr 14
2026/01/23 10:21:08.690322315 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): POWER_SENSE_CALLBACK #0 port_mapx 0x200 police_map 0x0 start_ppn 1
2026/01/23 10:21:08.690336229 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 port 10 power 4641 sig_power 4641 sp_power 0 min 3187 max 4641 over_draw 0 pwr->v 55924 pwr->i 83
2026/01/23 10:21:08.690358848 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): POWER_SENSE_CALLBACK #0 port_mapx 0x0 police_map 0x0 start_ppn 13
2026/01/23 10:21:08.889240164 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 95 msb 5
2026/01/23 10:21:09.312446551 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 103 msb 5
2026/01/23 10:21:09.735244121 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 117 msb 5
2026/01/23 10:21:10.155865917 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 109 msb 5
2026/01/23 10:21:10.577540834 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 123 msb 5
2026/01/23 10:21:11.001463297 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 245 msb 5
2026/01/23 10:21:11.422841214 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 17 msb 6
2026/01/23 10:21:11.843693775 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 17 msb 6
2026/01/23 10:21:12.266336013 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 14 msb 6
2026/01/23 10:21:12.687645762 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 18 msb 6
2026/01/23 10:21:13.109691672 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 16 msb 6
2026/01/23 10:21:13.543895082 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 18 msb 6
2026/01/23 10:21:13.964690040 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 10 msb 6
2026/01/23 10:21:14.387572496 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 6 msb 6
2026/01/23 10:21:14.809902113 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 1 msb 6
2026/01/23 10:21:15.232806022 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 10 msb 6
2026/01/23 10:21:15.655268105 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 18 msb 6
2026/01/23 10:21:16.077114633 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 231 msb 5
2026/01/23 10:21:16.498019651 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 248 msb 5
2026/01/23 10:21:16.919360401 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 12 msb 6
2026/01/23 10:21:17.339809124 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 22 msb 6
2026/01/23 10:21:17.761999668 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 38 msb 6
2026/01/23 10:21:18.183470409 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 42 msb 6
2026/01/23 10:21:18.639367138 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 32 msb 6
2026/01/23 10:21:18.690852770 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe_get_pwr_sense[POE_GET_POWER_SENSE]:sub_addr 0
2026/01/23 10:21:18.690873096 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe_get_pwr_sense[POE_GET_POWER_SENSE]:sub_addr 14
2026/01/23 10:21:18.690914377 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): POWER_SENSE_CALLBACK #0 port_mapx 0x200 police_map 0x0 start_ppn 1
2026/01/23 10:21:18.690938782 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 port 10 power 5312 sig_power 5312 sp_power 0 min 3187 max 5312 over_draw 0 pwr->v 55924 pwr->i 95
2026/01/23 10:21:18.690951600 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): POWER_SENSE_CALLBACK #0 port_mapx 0x0 police_map 0x0 start_ppn 13
2026/01/23 10:21:19.062002673 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 30 msb 6
2026/01/23 10:21:19.483871588 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 26 msb 6
2026/01/23 10:21:19.905457943 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 21 msb 6
2026/01/23 10:21:20.328469218 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 27 msb 6
2026/01/23 10:21:20.750913194 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 25 msb 6
2026/01/23 10:21:21.172472225 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 12 msb 6
2026/01/23 10:21:21.595360901 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 243 msb 5
2026/01/23 10:21:22.016028284 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 11 msb 6
2026/01/23 10:21:22.436662760 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 11 msb 6
2026/01/23 10:21:22.858862116 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 158 msb 6
2026/01/23 10:21:23.281570741 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 182 msb 6
2026/01/23 10:21:23.815221009 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 209 msb 6
2026/01/23 10:21:23.883810439 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 32 alloc_pwr 30W
2026/01/23 10:21:23.884504482 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 32 alloc_pwr 30W
2026/01/23 10:21:23.884782036 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:23.884821312 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 32 alloc_pwr 30W
2026/01/23 10:21:23.884861386 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:23.884892897 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 32 alloc_pwr 30W
2026/01/23 10:21:23.884933537 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 upoe_spare_pair_pwr[POE_SPARE_PAIR_COMMAND]:ppn 10(9), sub_addr 0
2026/01/23 10:21:23.885473117 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 30 factor 32 signal_power 30 spare_power 0
2026/01/23 10:21:23.885487152 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 30 factor 32 signal_power 30 spare_power 0
2026/01/23 10:21:23.885498236 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:23.885506793 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0x4e msb 0x22 action 0x2
2026/01/23 10:21:23.885517220 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 30 factor 32 signal_power 30 spare_power 0
2026/01/23 10:21:23.885527519 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:23.885535624 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0x4e msb 0x22 action 0x2
2026/01/23 10:21:23.885545838 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 30 factor 32 signal_power 30 spare_power 0
2026/01/23 10:21:23.885556895 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SPARE_PAIR_SUB_CMD=0x6 mode 0 upoearch 0 port 10(19)
2026/01/23 10:21:23.885565323 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 poe_lite received POE_SET_CUTOFF_CURRENT_SCALE_FACTOR port 10(19) portFlag 0 AllocatedPwr 30 msg[2] 6
2026/01/23 10:21:23.885574911 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 command POE_POWER_ON_SPARE_PAIR port 10(19) CurrentState AUTODET_SPARE
2026/01/23 10:21:23.885583649 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 P10(19) St AUTODET_SPARE Ev POE_SET_CUTOFF_CURRENT_SCALE_FACTOR
2026/01/23 10:21:23.885592218 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Spare Pair pwron port 10(19)
2026/01/23 10:21:23.885601314 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 IEE_POE_PWR_ON:SSPD port 10(19) spare pair power_on for class 4 alloc_power 30
2026/01/23 10:21:23.885609658 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Port 10(19):Disabling 4P ilim/Pcut 4P_OP_Config Reg 0x2d to 0x0
2026/01/23 10:21:23.888469422 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 P10(19) allocated_pwr 30W which_port 2 , is_30w 0 State AUTODET_SPARE - IEEE_POWERON      <--- PD on port don't need 4 pair-poe, hence its disabled
2026/01/23 10:21:23.888479118 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Sending POE_APPROVE ppn 10(19)
2026/01/23 10:21:23.891357227 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 got reply cmd POE_APPROVE len 0 for ppn 10
2026/01/23 10:21:24.246093233 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Got PWRGood PWR_SPARE port 10(19)
2026/01/23 10:21:24.248949671 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Setting PCUT P10(19) after power_on alloc_powr 30
2026/01/23 10:21:24.248960573 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 P10(19) State PWR_SPARE - PGOOD [AssigC 4 ReqC  4]
2026/01/23 10:21:24.248973044 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 73 msb 3
2026/01/23 10:21:24.299298352 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 Spare pair Evt 6  port 10(19) ConnChk 1
2026/01/23 10:21:24.299316224 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 RE_POE SPARE PAIR EVENT 6 [SPARE_PAIR_PWR_GOOD] on port 10
2026/01/23 10:21:24.615978564 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 139W
2026/01/23 10:21:24.616036260 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 139 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:24.616054378 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SSPD: class 4 4P:PCUT reg 0x2B ppn 10(18), bits 23 alloc_pwr 11 pcut1 60
2026/01/23 10:21:24.616082001 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 139W
2026/01/23 10:21:24.616656518 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 139W
2026/01/23 10:21:24.616942194 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:24.616986306 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 139W
2026/01/23 10:21:24.617025387 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:24.617063340 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 139W
2026/01/23 10:21:24.617113561 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:24.617151428 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 139W
2026/01/23 10:21:24.618943086 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SSPD: class 4 4P:PCUT reg 0x20 ppn 10(18), bit_val 23 alloc_pwr 11(sig 23) pcut1 23
2026/01/23 10:21:24.621772785 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SSPD: class 4 4P:PCUT reg 0x21 ppn 10(19), bit_val 23 alloc_pwr 11(sp 23) pcut1 0
2026/01/23 10:21:24.624616772 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 139 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:24.624634588 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 139 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:24.624643510 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:24.624651249 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0xbc msb 0xc action 0x2
2026/01/23 10:21:24.624659202 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0xbc msb 0xc action 0x2
2026/01/23 10:21:24.624668388 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 139 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:24.624676796 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:24.624684104 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0xbc msb 0xc action 0x2
2026/01/23 10:21:24.624691465 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0xbc msb 0xc action 0x2
2026/01/23 10:21:24.624699874 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 139 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:24.624708102 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:24.624715505 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0xbc msb 0xc action 0x2
2026/01/23 10:21:24.624722990 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0xbc msb 0xc action 0x2
2026/01/23 10:21:24.624731339 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 139 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:24.673026782 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 69 msb 3
2026/01/23 10:21:25.095539439 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 71 msb 3
2026/01/23 10:21:25.519011272 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 72 msb 3
2026/01/23 10:21:25.841984204 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W  <--- Post CDP, allocated power changed to 11W
2026/01/23 10:21:25.842035373 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:25.842050792 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SSPD: class 4 4P:PCUT reg 0x2B ppn 10(18), bits 22 alloc_pwr 11 pcut1 23
2026/01/23 10:21:25.842103575 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:25.842607895 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:25.842813992 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:25.842849868 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:25.842888160 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:25.842922755 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:25.842958284 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:25.842988333 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:25.844948063 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SSPD: class 4 4P:PCUT reg 0x20 ppn 10(18), bit_val 22 alloc_pwr 11(sig 22) pcut1 22
2026/01/23 10:21:25.847816407 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SSPD: class 4 4P:PCUT reg 0x21 ppn 10(19), bit_val 22 alloc_pwr 11(sp 22) pcut1 23
2026/01/23 10:21:25.850690283 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:25.850699843 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:25.850708590 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:25.850716389 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:25.850724148 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:25.850732701 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:25.850741108 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:25.850748460 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:25.850755812 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:25.850764179 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:25.850772451 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:25.850779763 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:25.850787129 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:25.850795575 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:25.942100417 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 65 msb 3
2026/01/23 10:21:25.942109477 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 153 msb 3
2026/01/23 10:21:26.364274439 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 68 msb 3
2026/01/23 10:21:26.364284996 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 157 msb 3
2026/01/23 10:21:26.785687835 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 68 msb 3
2026/01/23 10:21:26.785698901 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 159 msb 3
2026/01/23 10:21:27.104461884 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:27.104491376 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:27.104557076 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:27.104584132 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:27.105091094 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:27.105107583 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:27.105283163 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:27.105299704 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:27.105308443 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:27.105317590 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:27.105326295 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:27.105342400 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:27.105366412 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:27.105382929 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:27.105391468 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:27.105404178 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:27.105404556 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:27.105415982 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:27.105444011 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:27.105460794 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:27.105469610 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:27.105478568 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:27.105479245 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:27.105490325 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:27.208246756 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 67 msb 3
2026/01/23 10:21:27.208256750 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 159 msb 3
2026/01/23 10:21:27.631362144 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 70 msb 3
2026/01/23 10:21:27.631371926 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 164 msb 3
2026/01/23 10:21:28.052469205 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 69 msb 3
2026/01/23 10:21:28.052479649 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 162 msb 3
2026/01/23 10:21:28.475256957 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:28.475414174 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:28.475455049 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:28.475492960 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:28.475527582 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:28.475574059 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 66 msb 3
2026/01/23 10:21:28.475584161 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 153 msb 3
2026/01/23 10:21:28.475607113 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:28.475619697 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:28.475628476 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:28.475636940 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:28.475647416 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:28.475657682 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:28.475665872 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:28.475674221 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:28.475684236 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:28.691323951 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe_get_pwr_sense[POE_GET_POWER_SENSE]:sub_addr 0
2026/01/23 10:21:28.691338689 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe_get_pwr_sense[POE_GET_POWER_SENSE]:sub_addr 14
2026/01/23 10:21:28.691371210 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): POWER_SENSE_CALLBACK #0 port_mapx 0x200 police_map 0x0 start_ppn 1
2026/01/23 10:21:28.691384192 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 port 10 power 5983 sig_power 2796 sp_power 3131 min 3187 max 5983 over_draw 0 pwr->v 55924 pwr->i 107
2026/01/23 10:21:28.691395015 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): POWER_SENSE_CALLBACK #0 port_mapx 0x0 police_map 0x0 start_ppn 13
2026/01/23 10:21:28.897220844 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 65 msb 3
2026/01/23 10:21:28.897231667 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 159 msb 3
2026/01/23 10:21:29.318772153 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 66 msb 3
2026/01/23 10:21:29.318782837 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 166 msb 3
2026/01/23 10:21:29.641679413 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:29.641716465 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:29.641821969 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:29.641841843 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:29.641852868 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:29.641854033 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:29.641866077 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:29.641879531 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:29.641880360 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:29.641891955 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:29.641901014 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:29.641907892 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:29.641910851 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:29.641921879 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:29.741997805 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 63 msb 3
2026/01/23 10:21:29.742007814 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 161 msb 3
2026/01/23 10:21:30.163997555 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 60 msb 3
2026/01/23 10:21:30.164007463 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 163 msb 3
2026/01/23 10:21:30.585218800 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 58 msb 3
2026/01/23 10:21:30.585228498 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 157 msb 3
2026/01/23 10:21:30.772118357 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:30.772170395 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:30.772281078 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:30.772316580 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:30.772328405 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:30.772329943 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:30.772339999 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:30.772354334 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:30.772378327 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:30.772410151 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:30.772419762 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:30.772428625 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:30.772477925 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:30.772497599 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:31.008355521 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 61 msb 3
2026/01/23 10:21:31.008364982 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 161 msb 3
2026/01/23 10:21:31.429638497 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 60 msb 3
2026/01/23 10:21:31.429648022 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 159 msb 3
2026/01/23 10:21:31.852023095 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 59 msb 3
2026/01/23 10:21:31.852032715 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 164 msb 3
2026/01/23 10:21:32.021660470 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:32.021711508 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:32.021832006 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:32.021856730 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:32.021871212 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:32.021875262 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:32.021884437 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:32.021899926 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:32.021915189 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:32.021933815 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:32.021945856 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:32.021955166 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:32.021958447 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:32.021972718 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:32.274690736 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 61 msb 3
2026/01/23 10:21:32.274701135 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 160 msb 3
2026/01/23 10:21:32.698328240 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 54 msb 3
2026/01/23 10:21:32.698339449 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 154 msb 3
2026/01/23 10:21:33.119468127 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 50 msb 3
2026/01/23 10:21:33.119479451 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 150 msb 3
2026/01/23 10:21:33.541642816 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 42 msb 3
2026/01/23 10:21:33.541655078 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 139 msb 3
2026/01/23 10:21:33.965319483 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 37 msb 3
2026/01/23 10:21:33.965328929 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 137 msb 3
2026/01/23 10:21:34.227264803 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:34.227303055 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:34.227447149 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:34.227468104 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:34.227478032 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:34.227487107 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:34.227499336 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:34.227517935 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:34.227540109 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:34.227557675 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:34.227566455 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:34.227576014 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:34.227578627 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:34.227595826 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:34.388133852 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 29 msb 3
2026/01/23 10:21:34.388144321 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 125 msb 3
2026/01/23 10:21:34.810915691 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 28 msb 3
2026/01/23 10:21:34.810926771 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 129 msb 3
2026/01/23 10:21:35.234011711 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 16 msb 3
2026/01/23 10:21:35.234022442 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 118 msb 3
2026/01/23 10:21:35.437431256 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:35.437465202 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:35.437582289 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:35.437601316 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:35.437612037 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:35.437612670 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:35.437621525 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:35.437633479 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:35.437640614 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_pwr_police[POE_SET_POWER_POLICE]:ppn 10(9), sub_addr 0
2026/01/23 10:21:35.437657933 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  set power police received 10(18) 
2026/01/23 10:21:35.437667738 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(18) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:35.437669776 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe-logger Port: 10 poe_set_icutoff_current[POE_SET_CUTOFF_CURRENT_SCALE_FACTOR]:ppn 10(9), sub_addr 0 factor 23 alloc_pwr 11W
2026/01/23 10:21:35.437676706 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10  police values 10(19) lsb 0x5a msb 0xc action 0x2
2026/01/23 10:21:35.437687918 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 FROM_IOS PCUT/ICUT ppn 10(18), alloc_pwr 11 factor 23 signal_power 30 spare_power 0
2026/01/23 10:21:35.656364944 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 17 msb 3
2026/01/23 10:21:35.656374957 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 117 msb 3
2026/01/23 10:21:36.078110884 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 14 msb 3
2026/01/23 10:21:36.078120438 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 116 msb 3
2026/01/23 10:21:36.501691236 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 12 msb 3
2026/01/23 10:21:36.501702772 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 118 msb 3
2026/01/23 10:21:36.924469860 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 12 msb 3
2026/01/23 10:21:36.924479169 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 118 msb 3
2026/01/23 10:21:37.346463200 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 22 msb 3
2026/01/23 10:21:37.346472811 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 133 msb 3
2026/01/23 10:21:37.768619161 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 16 msb 3
2026/01/23 10:21:37.768630637 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 122 msb 3
2026/01/23 10:21:38.191683097 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 14 msb 3
2026/01/23 10:21:38.191693992 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 117 msb 3
2026/01/23 10:21:38.613463963 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 19 msb 3
2026/01/23 10:21:38.613475052 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 110 msb 3
2026/01/23 10:21:38.691932861 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe_get_pwr_sense[POE_GET_POWER_SENSE]:sub_addr 0
2026/01/23 10:21:38.691946846 {cmand_R0-0}{1}: [re_poe] [5309]: (note): poe_get_pwr_sense[POE_GET_POWER_SENSE]:sub_addr 14
2026/01/23 10:21:38.691962981 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): POWER_SENSE_CALLBACK #0 port_mapx 0x200 police_map 0x0 start_ppn 1
2026/01/23 10:21:38.691973713 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 port 10 power 5648 sig_power 2684 sp_power 2963 min 3187 max 5983 over_draw 0 pwr->v 55924 pwr->i 101
2026/01/23 10:21:38.691986858 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): POWER_SENSE_CALLBACK #0 port_mapx 0x0 police_map 0x0 start_ppn 13
2026/01/23 10:21:39.035856533 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 14 msb 3
2026/01/23 10:21:39.035864387 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 114 msb 3
2026/01/23 10:21:39.458248509 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 14 msb 3
2026/01/23 10:21:39.458258319 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 112 msb 3
2026/01/23 10:21:39.879564500 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 7 msb 3
2026/01/23 10:21:39.879575263 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 114 msb 3
2026/01/23 10:21:40.301699226 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 16 msb 3
2026/01/23 10:21:40.301709087 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 111 msb 3
2026/01/23 10:21:40.723429466 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 14 msb 3
2026/01/23 10:21:40.723440122 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 120 msb 3
2026/01/23 10:21:41.146696541 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 16 msb 3
2026/01/23 10:21:41.146706414 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 121 msb 3
2026/01/23 10:21:41.568999331 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 13 msb 3
2026/01/23 10:21:41.569010211 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 118 msb 3
2026/01/23 10:21:41.992197422 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 11 msb 3
2026/01/23 10:21:41.992207934 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 115 msb 3
2026/01/23 10:21:42.415301238 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 12 msb 3
2026/01/23 10:21:42.415311985 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 117 msb 3
2026/01/23 10:21:42.851943363 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 18 msb 3
2026/01/23 10:21:42.851952518 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 121 msb 3
2026/01/23 10:21:43.275363936 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 15 msb 3
2026/01/23 10:21:43.275375189 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 119 msb 3
2026/01/23 10:21:43.697580998 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 18 msb 3
2026/01/23 10:21:43.697597957 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 126 msb 3
2026/01/23 10:21:44.119639101 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(18) lsb 25 msb 3
2026/01/23 10:21:44.119648499 {cmand_R0-0}{1}: [re_poe] [5309:22209]: (note): poe-logger Port: 10 SENSE_DATA inst 4 port 10(19) lsb 130 msb 3
===========================================================
======= Unified Trace Decoder Information/Statistics ======
===========================================================
----------------- Decoder Input Information ---------------
===========================================================
 Num of Unique Streams .. 1
 Total UTF To Process ... 1
 Total UTM To Process ... 120224
 UTM Process Filter ..... cmand
 MRST Filter Rules ...... 1
===========================================================
----------------- Decoder Output Information --------------
===========================================================
 First UTM TimeStamp ............... 2026/01/23 09:09:55.879706826
 Last UTM TimeStamp ................ 2026/01/23 10:22:31.358035957
 UTM [Skipped / Rendered / Total] .. 119782 / 442 / 120224
 UTM [ENCODED] ..................... 442
 UTM [PLAIN TEXT] .................. 0
 UTM [DYN LIB] ..................... 0
 UTM [MODULE ID] ................... 0
 UTM [TDL TAN] ..................... 16
 UTM [APP CONTEXT] ................. 0
 UTM [MARKER] ...................... 0
 UTM [PCAP] ........................ 0
 UTM [LUID NOT FOUND] .............. 0
 UTM Level [EMERGENCY / ALERT / CRITICAL / ERROR] .. 0 / 0 / 0 / 0
 UTM Level [WARNING / NOTICE / INFO / DEBUG] ....... 0 / 442 / 0 / 0
 UTM Level [VERBOSE / NOISE / INVALID] ............. 0 / 0 / 0
===========================================================

C9350-24U_SWITCH# 
C9350-24U_SWITCH#
C9350-24U_SWITCH#sh cdp neigh g1/0/10 det
-------------------------
Device ID: SEPD42C447E4A9F
Entry address(es): 
  IP address: 192.168.1.115
Platform: Cisco IP Phone 9951,  Capabilities: Host Phone Two-port Mac Relay 
Interface: GigabitEthernet1/0/10,  Port ID (outgoing port): Port 1
Holdtime : 141 sec
Second Port Status: Down

Version :
sip9951.9-4-2SR2-2

advertisement version: 2
Peer Source MAC: d42c.447e.4a9f
Duplex: full
Power drawn: 10.802 Watts
Power request id: 40779, Power management id: 4
Power request levels are:10802 0 0 0 0                           <------ CDP requested power
Spare Pair PoE: Yes, Spare Pair Detection Required: No
Spare Pair PD Config: Enable, Spare Pair PSE Operational: Yes


Total cdp entries displayed : 1
C9350-24U_SWITCH#
C9350-24U_SWITCH#
C9350-24U_SWITCH#
C9350-24U_SWITCH#sh power inlin g1/0/10
Interface Admin  Oper       Power   Device              Class Max
                            (Watts)                            
--------- ------ ---------- ------- ------------------- ----- ----
Gi1/0/10  auto   on         10.8    IP Phone 9951       4     60.0 
C9350-24U_SWITCH#
C9350-24U_SWITCH#
C9350-24U_SWITCH#sh power inlin g1/0/10 det
 Interface: Gi1/0/10
 Inline Power Mode: auto
 Operational status (Alt-A,B): on,on
 Device Detected: yes
 Device Type: Cisco IP Phone 9951
 Connection Check: SS
 IEEE Class (Alt-A,B): 4
 Physical Assigned Class (Alt-A,B): 4
 Discovery mechanism used/configured: Ieee and Cisco
 Police: off

 Power Allocated 
 Admin Value: 60.0
 Power drawn from the source: 10.8
 Power available to the device: 10.8
 Allocated Power (Alt-A,B): 10.8
 
 Actual consumption
 Measured at the port(watts) (Alt-A,B): 5.8
 Maximum Power drawn by the device since powered on: 6.0
 
 Absent Counter: 0
 Over Current Counter: 0
 Short Current Counter: 0
 Invalid Signature Counter: 0
 Power Denied Counter: 0

 Power Negotiation Used: CDP
 LLDP Power Negotiation       --Sent to PD--      --Rcvd from PD--
 Power Type:                  -                    -
 Power Source:                -                    -
 Power Priority:              -                    -
 Requested Power(W):          -                    -
 Allocated Power(W):          -                    -

Four-Pair PoE Supported: Yes
Spare Pair Power Enabled: Yes
Four-Pair PD Architecture: Shared
Perpetual POE Enabled: FALSE
Fast POE Enabled: FALSE
Meter Start Time: 2026-01-22 06:27:41 UTC 
Metered Energy Value(WattSec):533367.6 
C9350-24U_SWITCH#

    Registrazione MCU 

    • Questa funzione aiuta a raccogliere i log relativi alla MCU
    • Gli output di log vengono memorizzati anche nei file di log di traccia di gestione chassis (comando)
    • L'infrastruttura di registrazione può essere eccessiva. Verificare che la funzionalità sia disabilitata al termine della raccolta dei log di debug. In caso contrario, le tracce dei comandi potrebbero essere riempite con i log PoE della porta specifica al termine della risoluzione dei problemi.
    • Per avviare/arrestare la registrazione MCU:
    Switch#set platform software ilpower switch <switch number> r0 logging mcu <start|stop>
    
<< sample MCU btrace log (collected during load-shed) PoE device kept disconnecting and connecting in an endless loop >>
    
2025/06/03 22:22:22.803175096 (cmand RO-0)(1): [cpa_sb] [6971]: UUID: 0, ra: 0 (note): [SYS_FPGA_ZAPPA): mcu log:

2025/06/03 22:22:22.883510836 (cmand R0-0) (1): (cpa_sb] [6971]: UUID: 0, ra: 0 (note): [SYS_FPGA_ZAPPA): mcu log: SOC timer expired (ready state)

2025/06/03 22:22:23.030997074 (cmand R0-0)(1): (cpa_sb] [6971]: UUID: 0, ra: 0 (note): [SYS_FPGA_ZAPPA): mcu log: POE IPC_MSG_TIMER_TICK_LOADSHED

2025/06/03 22:22:23.350286890 (cmand R0-0)(1): [cpa_sb] (6971): UUID: 0, ra: 0 (note): (SYS FPGA_ZAPPA] mcu log: Disconnect Sent

2025/06/03 22:22:23.55599641 (cmand R0-0)(1): [cpa_sb] [6971]: UUID: 0, ra: 0 (note): [SYS_FPGA_ZAPPA): mcu log: POE IPC_MSG_TIMER_TICK - LOADSHED

2025/06/03 22:22:31.755618688 (cmand R0-0)(1): [cpa_sb] [6971]: UUID: 0, ra: 0 (note): (SYS_FPGA_ZAPPA): mou log: Disconnect Sent

    Riepilogo

    Registri da raccogliere per la triage Cisco serie C9350 Smart Switch PoE:

    1. PoE show tech-support

    Switch#show tech-support poe

    2. Registri specifici della porta

    Switch#set platform software ilpower switch <switch number> r0 logging <port number> level <basic|detail>
    Switch#set platform software ilpower switch <switch number> r0 logging <port number> action <start|stop>

    3. Registri MCU

    Switch#set platform software ilpower switch <switch number> r0 logging mcu <start|stop>

    Cronologia delle revisioni

    Revisione Data di pubblicazione Commenti
    1.0
    01-Apr-2026
    Versione iniziale
    TAC Authored

    Contributo dei tecnici Cisco

    • Sharath Ranganna
      Progettazione Catalyst
    • Nathan Pan
      Cisco TAC

    Questo documento ti è stato utile?

    FeedbackFeedback

    Contattaci

    Questo documento si applica a questi prodotti