Introduction
Ce document décrit comment à la livraison de raté limit à de certains domaines ou hôte.
Solution
La commande de destconfig sur le CLI ou le Tableau de contrôles de destination sur l'onglet de stratégies de messagerie dans le GUI peut être utilisée pour configurer la limitation de débit de la livraison sur l'appliance de sécurité du courrier électronique de Cisco au domaine ou à l'hôte spécifique. Activant cette option est parfois recommandé d'empêcher oveloading les serveurs distants.
Est ci-dessous un exemple CLI sur la façon dont limiter la livraison de débit au domaine « example.com ».
mail.example.com> destconfig
There are currently 2 entries configured.
Choose the operation you want to perform:
- NEW - Create a new entry.
- EDIT - Modify an entry.
- DELETE - Remove an entry.
- DEFAULT - Change the default.
- PRINT - Display all entries.
- CLEAR - Remove all entries.
[]> new
Enter the domain you wish to limit.
[]> example.com
Do you wish to configure a concurrency limit for example.com? [Y]>
Enter the max concurrency limit for "example.com".
[500]> 100
Do you wish to apply a recipient limit to this domain? [N]> y
Enter the number of minutes used to measure the recipient limit.
[60]> 60
Enter the max number of recipients per 60 minutes for "example.com".
[]> 1000
Select how you want to apply the limits for example.com:
1. One limit applies to the entire domain example.com
2. Separate limit for each mail exchanger IP address
[1]>
Select how the limits will be enforced:
1. System Wide
2. Per Virtual Gateway(tm)
[1]>
Do you wish to apply a specific TLS setting for this domain? [N]>
Do you wish to apply a specific bounce verification address tagging setting for this domain? [N]>
Do you wish to apply a specific bounce profile to this domain? [N]>
There are currently 3 entries configured
Choose the operation you want to perform:
- NEW - Create a new entry.
- EDIT - Modify an entry.
- DELETE - Remove an entry.
- DEFAULT - Change the default.
- PRINT - Display all entries.
- CLEAR - Remove all entries.
[]>
mail.example.com> commit