Exemple de configuration d'IPsec dynamique à statique PIX à PIX PIX/ASA 7.x avec NAT et client VPN

Options de téléchargement

  • PDF     (163.8 KB)
    Consulter à l'aide d'Adobe Reader sur un grand nombre d'appareils
  • ePub     (101.9 KB)
    Consulter à l’aide de différentes applications sur iPhone, iPad, Android ou Windows Phone
  • Mobi (Kindle)     (129.0 KB)
    Consulter sur un appareil Kindle ou à l’aide d’une application Kindle sur plusieurs appareils
Mis à jour:3 mai 2007
ID du document:63876

Langage exempt de préjugés

Dans le cadre de la documentation associée à ce produit, nous nous efforçons d’utiliser un langage exempt de préjugés. Dans cet ensemble de documents, le langage exempt de discrimination renvoie à une langue qui exclut la discrimination en fonction de l’âge, des handicaps, du genre, de l’appartenance raciale de l’identité ethnique, de l’orientation sexuelle, de la situation socio-économique et de l’intersectionnalité. Des exceptions peuvent s’appliquer dans les documents si le langage est codé en dur dans les interfaces utilisateurs du produit logiciel, si le langage utilisé est basé sur la documentation RFP ou si le langage utilisé provient d’un produit tiers référencé. Découvrez comment Cisco utilise le langage inclusif.

À propos de cette traduction

Cisco a traduit ce document en traduction automatisée vérifiée par une personne dans le cadre d’un service mondial permettant à nos utilisateurs d’obtenir le contenu d’assistance dans leur propre langue. Il convient cependant de noter que même la meilleure traduction automatisée ne sera pas aussi précise que celle fournie par un traducteur professionnel.

Introduction

Dans la plupart des cas, un PIX distant qui se connecte à un PIX central n'utilise pas le traduction d'adresses de réseau (NAT). Au lieu de cela, le PIX distant utilise une adresse IP statique extérieure. Dans un exemple où un PIX central qui exécute la version 7.x et plus se connecte à un PIX distant utilisant NAT, il est identique à un petit bureau à domicile tel qu'un PIX 501 ou 506 connecté à un modem filaire ou DSL utilisant le Dynamic Host Control Protocol (DHCP). PIX 7.x et plus et Cisco Adaptive Security Device Manager (ASDM) ne fonctionnent pas sur un PIX 501 ou 506. Par conséquent, avec cet exemple le PIX distant avec le DHCP et NAT est présumé être pour un PIX 501 ou 506 qui exécute le code 6.x. Cette configuration permet au PIX central d'accepter des connexions IPSec dynamiques. Le PIX distant utilise NAT pour joindre les périphériques adressés en privé derrière celui-ci au réseau adressé en privé derrière le PIX central. Le PIX distant peut initier des connexions au PIX central (il connaît le point d'extrémité), mais le PIX central ne peut pas initier des connexions au PIX distant (il ne connaît pas le point d'extrémité).

Dans cet exemple de configuration, Tiger est le PIX distant et Lion est le PIX central. Puisque l'adresse IP de Tiger est inconnue, vous devez configurer Lion pour qu'il accepte dynamiquement les connexions depuis n'importe quel endroit en connaissant la clé pré-partagée générique. Tiger sait quel trafic doit être chiffré (parce qu'il est spécifié par la liste d'accès) et où se trouve le point de terminaison Lion. Tiger doit initier la connexion. Les deux côtés exécutent NAT et nat 0 afin de contourner NAT pour le trafic IPsec.

En outre, l'utilisateur distant dans cette configuration se connecte au PIX central (Lion) à l'aide du Client VPN Cisco 4.x. L'utilisateur distant ne peut pas se connecter au PIX distant (Tiger), car les deux côtés ont attribué dynamiquement des adresses IP et ne savent pas où envoyer la demande.

Référez-vous à Configuration de PIX à PIX Dynamic-to-Static IPsec avec NAT et Cisco VPN Client afin d'en savoir plus sur le même scénario dans PIX 6.x avec Cisco VPN Client 3.x.

Conditions préalables

Conditions requises

Aucune spécification déterminée n'est requise pour ce document.

Components Used

Les informations contenues dans ce document sont basées sur les versions de matériel et de logiciel suivantes :

  • Logiciel Cisco PIX Firewall version 7.x et ultérieure (PIX central)

  • Logiciel Cisco PIX Firewall Version 6.3.4 (PIX distant)

  • Client VPN Cisco Version 4.x

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

Pour plus d'informations sur les conventions utilisées dans ce document, reportez-vous à Conventions relatives aux conseils techniques Cisco.

Configuration

Cette section vous fournit des informations pour configurer les fonctionnalités décrites dans ce document.

Remarque : utilisez l'outil de recherche de commandes (clients enregistrés uniquement) pour obtenir plus d'informations sur les commandes utilisées dans cette section.

Diagramme du réseau

Ce document utilise la configuration réseau suivante :

pix-dyntostat-ipsec-nat.gif

Configurations

Ce document utilise les configurations suivantes :

Lion 
PIX Version 7.0(0)  
names 
! 
interface Ethernet0 
 nameif outside 
 security-level 0 
 ip address 172.18.124.166 255.255.255.0  
! 
interface Ethernet1 
 nameif inside 
 security-level 100 
 ip address 10.2.2.1 255.255.255.0  
! 
interface Ethernet2 
 shutdown 
 nameif intf2 
 security-level 4 
 no ip address 
! 
interface Ethernet3 
 shutdown 
 nameif intf3 
 security-level 6 
 no ip address 
! 
interface Ethernet4 
 shutdown 
 nameif intf4 
 security-level 8 
 no ip address 
! 
interface Ethernet5 
 shutdown 
 nameif intf5 
 security-level 10 
 no ip address 
! 
enable password 8Ry2YjIyt7RRXU24 encrypted 
passwd 2KFQnbNIdI.2KYOU encrypted 
hostname lion 
domain-name cisco.com 
boot system flash:/image.bin 
ftp mode passive 
access-list 100 extended permit ip 10.2.2.0 255.255.255.0 10.1.1.0 255.255.255.0  
access-list 100 extended permit ip 10.2.2.0 255.255.255.0 10.3.3.0 255.255.255.0  
pager lines 24 
mtu outside 1500 
mtu inside 1500 
mtu intf2 1500 
mtu intf3 1500 
mtu intf4 1500 
mtu intf5 1500 
ip local pool clientpool 10.3.3.1-10.3.3.10 
no failover 
monitor-interface outside 
monitor-interface inside 
monitor-interface intf2 
monitor-interface intf3 
monitor-interface intf4 
monitor-interface intf5 
asdm image flash:/asdm-501.bin 
asdm history enable 
arp timeout 14400 
nat-control 
global (outside) 1 interface 
nat (inside) 0 access-list 100 
nat (inside) 1 0.0.0.0 0.0.0.0 
route outside 0.0.0.0 0.0.0.0 172.18.124.1 1 
timeout xlate 3:00:00 
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 
timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00 
timeout uauth 0:05:00 absolute 
aaa-server TACACS+ protocol tacacs+ 
aaa-server RADIUS protocol radius 
group-policy unityclient internal 
group-policy unityclient attributes 
 wins-server value 10.1.1.3 
 dns-server value 10.1.1.3 
 vpn-idle-timeout 30 
 default-domain value cisco.com 
 user-authentication disable 
username cisco password 3USUcOPFUiMCO4Jk encrypted 
http server enable 
http 0.0.0.0 0.0.0.0 outside 
http 0.0.0.0 0.0.0.0 inside 
no snmp-server location 
no snmp-server contact 
snmp-server community public 
snmp-server enable traps snmp 
crypto ipsec transform-set myset esp-des esp-md5-hmac  
crypto dynamic-map cisco 1 set transform-set myset 
crypto map dyn-map 20 ipsec-isakmp dynamic cisco 
crypto map dyn-map interface outside 
isakmp enable outside 
isakmp policy 20 authentication pre-share 
isakmp policy 20 encryption des 
isakmp policy 20 hash md5 
isakmp policy 20 group 2 
isakmp policy 20 lifetime 3600 
isakmp policy 65535 authentication pre-share 
isakmp policy 65535 encryption 3des 
isakmp policy 65535 hash sha 
isakmp policy 65535 group 2 
isakmp policy 65535 lifetime 86400 
telnet timeout 5 
ssh timeout 5 
ssh version 1 
console timeout 0 
tunnel-group DefaultL2LGroup type ipsec-l2l
tunnel-group DefaultL2LGroup general-attributes
   authentication-server-group none
tunnel-group DefaultL2LGroup ipsec-attributes
   pre-shared-key * 
tunnel-group unityclient type ipsec-ra 
tunnel-group unityclient general-attributes 
 address-pool clientpool 
 authentication-server-group none 
 default-group-policy unityclient 
tunnel-group unityclient ipsec-attributes 
 pre-shared-key * 
! 
class-map inspection_default 
 match default-inspection-traffic 
! 
! 
policy-map global_policy 
 class inspection_default 
  inspect dns maximum-length 512  
  inspect ftp  
  inspect h323 h225  
  inspect h323 ras  
  inspect http  
  inspect netbios  
  inspect rsh  
  inspect rtsp  
  inspect skinny  
  inspect esmtp  
  inspect sqlnet  
  inspect sunrpc  
  inspect tftp  
  inspect sip  
  inspect xdmcp  
!  
service-policy global_policy global 
Cryptochecksum:4e20a2153437d60c7f01054808d41b42 
: end

Tigre 
PIX Version 6.3(4) 
interface ethernet0 auto 
interface ethernet1 auto 
interface ethernet2 auto shutdown 
interface ethernet3 auto shutdown 
interface ethernet4 auto shutdown 
interface ethernet5 auto shutdown 
nameif ethernet0 outside security0 
nameif ethernet1 inside security100 
nameif ethernet2 intf2 security4 
nameif ethernet3 intf3 security6 
nameif ethernet4 intf4 security8 
nameif ethernet5 intf5 security10 
enable password 8Ry2YjIyt7RRXU24 encrypted 
passwd 2KFQnbNIdI.2KYOU encrypted 
hostname tiger 
domain-name cisco.com 
fixup protocol dns maximum-length 512 
fixup protocol ftp 21 
fixup protocol h323 h225 1720 
fixup protocol h323 ras 1718-1719 
fixup protocol http 80 
fixup protocol rsh 514 
fixup protocol rtsp 554 
fixup protocol sip 5060 
fixup protocol sip udp 5060 
fixup protocol skinny 2000 
fixup protocol smtp 25 
fixup protocol sqlnet 1521 
fixup protocol tftp 69 
names 
access-list 101 permit ip 10.1.1.0 255.255.255.0 10.2.2.0 255.255.255.0  
pager lines 24 
mtu outside 1500 
mtu inside 1500 
mtu intf2 1500 
mtu intf3 1500 
mtu intf4 1500 
mtu intf5 1500

!--- This command configures the outside interface !--- as a DHCP client and it is assumed that the IP address !--- 172.18.124.167 is assigned by the DHCP server.

ip address outside dhcp 
ip address inside 10.1.1.1 255.255.255.0 
no ip address intf2 
no ip address intf3 
no ip address intf4 
no ip address intf5 
ip audit info action alarm 
ip audit attack action alarm 
no failover 
failover timeout 0:00:00 
failover poll 15 
no failover ip address outside 
no failover ip address inside 
no failover ip address intf2 
no failover ip address intf3 
no failover ip address intf4 
no failover ip address intf5 
pdm history enable 
arp timeout 14400 
nat (inside) 0 access-list 101 
route outside 0.0.0.0 0.0.0.0 172.18.124.1 1 
timeout xlate 3:00:00 
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 
timeout uauth 0:05:00 absolute 
aaa-server TACACS+ protocol tacacs+  
aaa-server TACACS+ max-failed-attempts 3  
aaa-server TACACS+ deadtime 10  
aaa-server RADIUS protocol radius  
aaa-server RADIUS max-failed-attempts 3  
aaa-server RADIUS deadtime 10  
aaa-server LOCAL protocol local  
no snmp-server location 
no snmp-server contact 
snmp-server community public 
no snmp-server enable traps 
floodguard enable 
sysopt connection permit-ipsec 
crypto ipsec transform-set myset esp-des esp-md5-hmac  
crypto map newmap 10 ipsec-isakmp 
crypto map newmap 10 match address 101 
crypto map newmap 10 set peer 172.18.124.166 
crypto map newmap 10 set transform-set myset 
crypto map newmap interface outside 
isakmp enable outside 
isakmp key ******** address 172.18.124.166 netmask 255.255.255.255  
isakmp policy 10 authentication pre-share 
isakmp policy 10 encryption des 
isakmp policy 10 hash md5 
isakmp policy 10 group 2 
isakmp policy 10 lifetime 3600 
telnet timeout 5 
ssh timeout 5 
console timeout 0 
terminal width 80 
Cryptochecksum:906331b1b1ca162ea53e951588efb070 
: end

Vérification

Référez-vous à cette section pour vous assurer du bon fonctionnement de votre configuration.

L'Outil Interpréteur de sortie (clients enregistrés uniquement) (OIT) prend en charge certaines commandes show. Utilisez l'OIT pour afficher une analyse de la sortie de la commande show .

Remarque : Vous devez exécuter les commandes clear en mode de configuration.

  • clear crypto ipsec sa - Réinitialise les associations IPsec après des tentatives échouées de négociation d'un tunnel VPN.

  • clear crypto isakmp sa - Réinitialise les associations de sécurité ISAKMP (Internet Security Association and Key Management Protocol) après des tentatives infructueuses de négociation d'un tunnel VPN.

  • show crypto engine ipsec : affiche les sessions chiffrées.

Dépannage

Clés prépartagées identiques

Si le tunnel IPsec LAN à LAN (L2L) n'est pas établi, vérifiez si la clé pré-partagée pour DefaultRAGroup et la clé pré-partagée pour DefaultL2LGroup sont identiques. Si c'est le cas, le PIX/ASA termine d'abord le tunnel sur le groupe DefaultRAGroup et le tunnel L2L est susceptible d'échouer. Assurez-vous que les clés pré-partagées des deux groupes de tunnels par défaut sont différentes.

Dépannage des commandes

L'Outil Interpréteur de sortie (clients enregistrés uniquement) (OIT) prend en charge certaines commandes show. Utilisez l'OIT pour afficher une analyse de la sortie de la commande show .

Remarque : Consulter les renseignements importants sur les commandes de débogage avant d’utiliser les commandes de débogage.

  • debug crypto ipsec - Utilisé pour voir si un client négocie la partie IPsec de la connexion VPN.

  • debug crypto isakmp [level] - Utilisé pour voir si les homologues négocient la partie ISAKMP du VPN.

Exemples de résultats de débogage corrects

Voici quelques exemples de bons résultats de commande debug :

PIX central (7.0.0) 

lion(config)# 2nd try, on central PIX from remote PIXApr 05 16:48:31 [IKEv1 DEBUG]:
 IP = 172.18.124.167, processing SA payload 
Apr 05 16:48:31 [IKEv1 DEBUG]: IP = 172.18.124.167, Oakley proposal is acceptable 
Apr 05 16:48:31 [IKEv1 DEBUG]: IP = 172.18.124.167, processing IKE SA 
Apr 05 16:48:31 [IKEv1 DEBUG]: IP = 172.18.124.167, IKE SA Proposal # 1, Transform
 # 1 acceptable  Matches global IKE entry # 3 
Apr 05 16:48:31 [IKEv1 DEBUG]: IP = 172.18.124.167, constructing ISA_SA for isakmp 
Apr 05 16:48:31 [IKEv1 DEBUG]: IP = 172.18.124.167, constructing Fragmentation VID
 + extended capabilities payload 
Apr 05 16:48:31 [IKEv1]: IP = 172.18.124.167, IKE DECODE SENDING Message (msgid=0)
 with payloads : HDR + SA (1) + VENDOR (13) + NONE (0) total length : 104 
Apr 05 16:48:32 [IKEv1]: IP = 172.18.124.167, IKE DECODE RECEIVED Message (msgid=0)
 with payloads : HDR + KE (4) + NONCE (10) + VENDOR (13) + VENDOR (13) +VENDOR (13)
 + VENDOR (13) + NONE (0) total length : 256 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, processing ke payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, processing ISA_KE 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, processing nonce payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, processing VID payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, Received xauth V6 VID 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, processing VID payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, Received DPD VID 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, processing VID payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, Received Cisco Unity client VID 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, processing VID payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, Processing IOS/PIX Vendor ID 
payload (version: 1.0.0, capabilities: 00000025) 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, constructing ke payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, constructing nonce payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, constructing Cisco Unity VID payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, constructing xauth V6 VID payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, Send IOS VID 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, Constructing ASA spoofing IOS
 Vendor ID payload (version: 1.0.0, capabilities: 20000001) 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, constructing VID payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, Send Altiga/Cisco VPN3000/Cisco
 ASA GW VID 
Apr 05 16:48:32 [IKEv1]: IP = 172.18.124.167, Connection landed on tunnel_group
 DefaultL2LGroup
Apr 05 16:48:32 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Generating keys for Responder... 
Apr 05 16:48:32 [IKEv1]: IP = 172.18.124.167, IKE DECODE SENDING Message
 (msgid=0) with payloads : HDR + KE (4) + NONCE (10) + VENDOR (13) + VENDOR (13)
 + VENDOR (13) + VENDOR (13) + NONE (0) total length : 256 
Apr 05 16:48:32 [IKEv1]: IP = 172.18.124.167, IKE DECODE RECEIVED Message (msg 
id=0) with payloads : HDR + ID (5) + HASH (8) + NONE (0) total length : 71 
Apr 05 16:48:32 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Processing ID 
Apr 05 16:48:32 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 processing hash 
Apr 05 16:48:32 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 computing hash 
Apr 05 16:48:32 [IKEv1]: IP = 172.18.124.167, Connection landed on tunnel_group
 DefaultL2LGroup 
Apr 05 16:48:32 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 constructing ID 
Apr 05 16:48:32 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 construct hash payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 computing hash 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, Constructing IOS keep
 alive payload: proposal=32767/32767 sec. 
Apr 05 16:48:32 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 constructing dpd vid payload 
Apr 05 16:48:32 [IKEv1]: IP = 172.18.124.167, IKE DECODE SENDING Message
 (msgid=0) with payloads : HDR + ID (5) + HASH (8) + IOS KEEPALIVE (14) 
+ VENDOR (13) + NONE (0) total length : 102 
Apr 05 16:48:33 [IKEv1]: IP = 172.18.124.167, IKE DECODE RECEIVED Message
 (msgid=ba80c56e) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE (0)
 total length : 76 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 processing hash 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Processing Notify payload 
Apr 05 16:48:33 [IKEv1]: Received unexpected event EV_ACTIVATE_NEW_SA in
 state MM_TM_INIT_MODECFG_H 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Delay Quick Mode processing, Cert/Trans Exch/RM DSID in progress 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Resume Quick Mode processing, Cert/Trans Exch/RM DSID completed 
Apr 05 16:48:33 [IKEv1]: Group = DefaultL2LGroup, IP = 172.18.124.167, PHASE 1COMPLETED 
Apr 05 16:48:33 [IKEv1]: IP = 172.18.124.167, Keep-alive type for this connection: DPD 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Starting phase 1 rekey timer: 3420000 (ms) 
Apr 05 16:48:33 [IKEv1]: IP = 172.18.124.167, IKE DECODE RECEIVED Message
 (msgid=20c2120e) with payloads : HDR + HASH (8) + SA (1) + NONCE (10) + ID
 (5) + ID (5) + NONE (0) total length : 164 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 processing hash 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 processing SA payload 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 processing nonce payload 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Processing ID 
Apr 05 16:48:33 [IKEv1]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Received remote IP Proxy Subnet data in ID Payload:   Address 10.1.1.0,
 Mask 255.255.255.0, Protocol 0, Port 0 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Processing ID 
Apr 05 16:48:33 [IKEv1]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Received local IP Proxy Subnet data in ID Payload:   Address 10.2.2.0,
 Mask 255.255.255.0, Protocol 0, Port 0 
Apr 05 16:48:33 [IKEv1]: QM IsRekeyed old sa not found by addr 
Apr 05 16:48:33 [IKEv1]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 IKE Remote Peer configured for SA: cisco 
Apr 05 16:48:33 [IKEv1]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 processing IPSEC SA 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 IPSec SA Proposal # 1, Transform # 1 acceptable  Matches global IPSec SA entry # 1 
Apr 05 16:48:33 [IKEv1]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 IKE: requesting SPI! 
Apr 05 16:48:33 [IKEv1 DEBUG]: IKE got SPI from key engine: SPI = 0xd5243861 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 oakley constucting quick mode 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 constructing blank hash 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 constructing ISA_SA for ipsec 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 constructing ipsec nonce payload 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 constructing proxy ID 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Transmitting Proxy Id: 
  Remote subnet: 10.1.1.0  Mask 255.255.255.0 Protocol 0  Port 0 
  Local subnet:  10.2.2.0  mask 255.255.255.0 Protocol 0  Port 0 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 constructing qm hash 
Apr 05 16:48:33 [IKEv1]: IP = 172.18.124.167, IKE DECODE SENDING Message
 (msgid=20c2120e) with payloads : HDR + HASH (8) + SA (1) + NONCE (10) +
 ID (5) + ID (5) + NONE (0) total length : 164 
Apr 05 16:48:33 [IKEv1]: IP = 172.18.124.167, IKE DECODE RECEIVED Message
 (msgid=20c2120e) with payloads : HDR + HASH (8) + NONE (0) total length : 48 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 processing hash 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 loading all IPSEC SAs 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Generating Quick Mode Key! 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Generating Quick Mode Key! 
Apr 05 16:48:33 [IKEv1]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Security negotiation complete for User (DefaultL2LGroup)  Responder,
 Inbound SPI = 0xd5243861, Outbound SPI = 0x7bb11ead 
Apr 05 16:48:33 [IKEv1 DEBUG]: IKE got a KEY_ADD msg for SA: SPI = 0x7bb11ead 
Apr 05 16:48:33 [IKEv1 DEBUG]: pitcher: rcv KEY_UPDATE, spi 0xd5243861 
Apr 05 16:48:33 [IKEv1]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 PHASE 2 COMPLETED (msgid=20c2120e)

NAT dynamique PIX distant (6.3.4) 

tiger(config)# 
ISAKMP (0): beginning Main Mode exchange 

crypto_isakmp_process_block:src:172.18.124.166, dest:172.18.124.167 spt:500
 dpt:500 OAK_MM exchange 
ISAKMP (0): processing SA payload. message ID = 0 

ISAKMP (0): Checking ISAKMP transform 1 against priority 10 policy 
ISAKMP:      encryption DES-CBC 
ISAKMP:      hash MD5 
ISAKMP:      default group 2 
ISAKMP:      auth pre-share 
ISAKMP:      life type in seconds 
ISAKMP:      life duration (basic) of 3600 
ISAKMP (0): atts are acceptable. Next payload is 0 
ISAKMP (0): processing vendor id payload 

ISAKMP (0): SA is doing pre-shared key authentication using id type
 ID_FQDN return status is IKMP_NO_ERROR 
crypto_isakmp_process_block:src:172.18.124.166, dest:172.18.124.167
 spt:500 dpt:500 OAK_MM exchange 
ISAKMP (0): processing KE payload. message ID = 0 
ISAKMP (0): processing NONCE payload. message ID = 0 
ISAKMP (0): processing vendor id payload 
ISAKMP (0): processing vendor id payload 
ISAKMP (0): received xauth v6 vendor id 
ISAKMP (0): processing vendor id payload 
ISAKMP (0): speaking to another IOS box! 
ISAKMP (0): processing vendor id payload 
ISAKMP (0): speaking to a VPN3000 concentrator 
ISAKMP (0): ID payload 
        next-payload : 8 
        type         : 2 
        protocol     : 17 
        port         : 500 
        length       : 19 
ISAKMP (0): Total payload length: 23 
return status is IKMP_NO_ERROR 
crypto_isakmp_process_block:src:172.18.124.166, dest:172.18.124.167 spt:500 dpt:500 
OAK_MM exchange 
ISAKMP (0): processing ID payload. message ID = 0 
ISAKMP (0): processing HASH payload. message ID = 0 
ISAKMP (0): processing vendor id payload 

ISAKMP (0): remote peer supports dead peer detection 

ISAKMP (0): SA has been authenticated 

ISAKMP (0): beginning Quick Mode exchange, M-ID of 549589518:20c2120eIPSEC(key_engine):
 got a queue event... 
IPSEC(spi_response): getting spi 0x7bb11ead(2075205293) for SA 
        from  172.18.124.166 to  172.18.124.167 for prot 3 

return status is IKMP_NO_ERROR 
ISAKMP (0): sending INITIAL_CONTACT notify 
ISAKMP (0): sending NOTIFY message 24578 protocol 1 
VPN Peer: ISAKMP: Added new peer: ip:172.18.124.166/500 Total VPN Peers:1 
VPN Peer: ISAKMP: Peer ip:172.18.124.166/500 Ref cnt incremented to:1 Total VPN Peers:1 
crypto_isakmp_process_block:src:172.18.124.166, dest:172.18.124.167 spt:500 dpt:500 
OAK_QM exchange 
oakley_process_quick_mode: 
OAK_QM_IDLE 
ISAKMP (0): processing SA payload. message ID = 549589518 

ISAKMP : Checking IPSec proposal 1 

ISAKMP: transform 1, ESP_DES 
ISAKMP:   attributes in transform: 
ISAKMP:      SA life type in seconds 
ISAKMP:      SA life duration (basic) of 28800 
ISAKMP:      SA life type in kilobytes 
ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0 
ISAKMP:      encaps is 1 
ISAKMP:      authenticator is HMAC-MD5 
ISAKMP (0): atts are acceptable.IPSEC(validate_proposal_request): proposal part #1, 
  (key eng. msg.) dest= 172.18.124.166, src= 172.18.124.167, 
    dest_proxy= 10.2.2.0/255.255.255.0/0/0 (type=4), 
    src_proxy= 10.1.1.0/255.255.255.0/0/0 (type=4), 
    protocol= ESP, transform= esp-des esp-md5-hmac , 
    lifedur= 0s and 0kb, 
    spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4 

ISAKMP (0): processing NONCE payload. message ID = 549589518 

ISAKMP (0): processing ID payload. message ID = 549589518 
ISAKMP (0): processing ID payload. message ID = 549589518 
ISAKMP (0): Creating IPSec SAs 
        inbound SA from  172.18.124.166 to  172.18.124.167 (proxy 10.2.2.0 to 10.1.1.0) 
        has spi 2075205293 and conn_id 1 and flags 4 
        lifetime of 28800 seconds 
        lifetime of 4608000 kilobytes 
        outbound SA from  172.18.124.167 to  172.18.124.166 (proxy 10.1.1.0 to 10.2.2.0) 
        has spi 3575920737 and conn_id 2 and flags 4 
        lifetime of 28800 seconds 
        lifetime of 4608000 kilobytesIPSEC(key_engine): got a queue event... 
IPSEC(initialize_sas): , 
  (key eng. msg.) dest= 172.18.124.167, src= 172.18.124.166, 
    dest_proxy= 10.1.1.0/255.255.255.0/0/0 (type=4), 
    src_proxy= 10.2.2.0/255.255.255.0/0/0 (type=4), 
    protocol= ESP, transform= esp-des esp-md5-hmac , 
    lifedur= 28800s and 4608000kb, 
    spi= 0x7bb11ead(2075205293), conn_id= 1, keysize= 0, flags= 0x4IPSEC(initialize_sas): , 
  (key eng. msg.) src= 172.18.124.167, dest= 172.18.124.166, 
    src_proxy= 10.1.1.0/255.255.255.0/0/0 (type=4), 
    dest_proxy= 10.2.2.0/255.255.255.0/0/0 (type=4), 
    protocol= ESP, transform= esp-des esp-md5-hmac , 
    lifedur= 28800s and 4608000kb, 
    spi= 0xd5243861(3575920737), conn_id= 2, keysize= 0, flags= 0x4 

VPN Peer: IPSEC: Peer ip:172.18.124.166/500 Ref cnt incremented to:2 Total VPN Peers:1 
VPN Peer: IPSEC: Peer ip:172.18.124.166/500 Ref cnt incremented to:3 Total VPN Peers:1
 return status is IKMP_NO_ERROR

Client VPN 4.0.5 sur Central PIX 7.0 

lion(config)# Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, processing SA payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, processing ke payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, processing ISA_KE 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, processing nonce payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, Processing ID 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, processing VID payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, Received xauth V6 VID 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, processing VID payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, Received DPD VID 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, processing VID payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, Received NAT-Traversal ver02 VID 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, processing VID payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, Received Fragmentation VID 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, IKE Peer included IKE fragmentation
 capability flags:  Main Mode:        True  Aggressive Mode:  False 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, processing VID payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, Received Cisco Unity client VID 
Apr 05 16:49:56 [IKEv1]: IP = 64.102.51.191, Connection landed on tunnel_group unityclient 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, processing IKE SA 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, IKE SA Proposal # 1,
 Transform # 14 acceptable  Matches global IKE entry # 3 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, constructing ISA_SA
 for isakmp 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, 
 constructing ke payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, 
 constructing nonce payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Generating keys for Responder... 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing ID 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 construct hash payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 computing hash 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing Cisco Unity VID payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing xauth V6 VID payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing dpd vid payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing Fragmentation VID + extended capabilities payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing VID payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Send Altiga/Cisco VPN3000/Cisco ASA GW VID 
Apr 05 16:49:56 [IKEv1]: IP = 64.102.51.191, IKE DECODE SENDING Message
 (msgid=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + 
 HASH (8) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR
 (13) + NONE (0) total length : 378 
Apr 05 16:49:56 [IKEv1]: IP = 64.102.51.191, IKE DECODE RECEIVED Message
 (msgid=0) with payloads : HDR + HASH (8) + NOTIFY (11) + VENDOR (13) +
 VENDOR (13) + NONE (0) total length : 116 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, processing hash 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, computing hash 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Processing Notify payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 processing VID payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Processing IOS/PIX Vendor ID payload (version: 1.0.0, capabilities: 00000408) 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 processing VID payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Received Cisco Unity client VID 
Apr 05 16:49:56 [IKEv1]: IP = 64.102.51.191, IKE DECODE RECEIVED Message
 (msgid=a0bb428) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0)
 total length: 196 
Apr 05 16:49:56 [IKEv1 DEBUG]: process_attr(): Enter! 
Apr 05 16:49:56 [IKEv1 DEBUG]: Processing cfg Request attributes 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for IPV4 address! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for IPV4 net mask! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for DNS server address! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for WINS server address! 
Apr 05 16:49:56 [IKEv1]: Group = unityclient, IP = 64.102.51.191, Received
 unsupported transaction mode attribute: 5 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for Banner! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for Save PW setting! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for Default Domain Name! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for Split Tunnel List! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for Split DNS! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for PFS setting! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for backup ip-sec peer list! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for Application Version! 
Apr 05 16:49:56 [IKEv1]: Group = unityclient, IP = 64.102.51.191, Client Type: WinNT
  Client Application Version: 4.0.5 (Rel) 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for FWTYPE! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for DHCP hostname
 for DDNS is: tthotus-xp! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for UDP Port! 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing blank hash 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing qm hash 
Apr 05 16:49:56 [IKEv1]: IP = 64.102.51.191, IKE DECODE SENDING Message
 (msgid=a0bb428) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0)
 total length : 157 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Delay Quick Mode processing, Cert/Trans Exch/RM DSID in progress 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Resume Quick Mode processing, Cert/Trans Exch/RM DSID completed 
Apr 05 16:49:56 [IKEv1]: Group = unityclient, IP = 64.102.51.191, PHASE 1 COMPLETED 
Apr 05 16:49:56 [IKEv1]: IP = 64.102.51.191, Keep-alive type for this connection: DPD 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Starting phase 1 rekey timer: 3420000 (ms) 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 sending notify message 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing blank hash 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing qm hash 
Apr 05 16:49:56 [IKEv1]: IP = 64.102.51.191, IKE DECODE SENDING Message
 (msgid=9be7674c) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE
 (0) total length : 84 
Apr 05 16:49:57 [IKEv1]: IP = 64.102.51.191, IKE DECODE RECEIVED Message
 (msgid=833e7945) with payloads : HDR + HASH (8) + SA (1) + NONCE (10)
 + ID (5) + ID (5) + NONE (0) total length : 1022 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, processing hash 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 processing SA payload 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 processing nonce payload 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, Processing ID 
Apr 05 16:49:57 [IKEv1]: Group = unityclient, IP = 64.102.51.191,
 Received remote Proxy Host data in ID Payload:  Address 10.3.3.1, Protocol 0, Port 0 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, Processing ID 
Apr 05 16:49:57 [IKEv1]: Group = unityclient, IP = 64.102.51.191,
 Received local IP Proxy Subnet data in ID Payload:   Address 0.0.0.0,
 Mask 0.0.0.0, Protocol 0, Port 0 
Apr 05 16:49:57 [IKEv1]: QM IsRekeyed old sa not found by addr 
Apr 05 16:49:57 [IKEv1]: Group = unityclient, IP = 64.102.51.191,
 IKE Remote Peer configured for SA: cisco 
Apr 05 16:49:57 [IKEv1]: Group = unityclient, IP = 64.102.51.191,
 processing IPSEC SA 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 IPSecSA Proposal # 14, Transform # 1 acceptable  Matches global IPSec SA entry # 1 
Apr 05 16:49:57 [IKEv1]: Group = unityclient, IP = 64.102.51.191, IKE: requesting SPI! 
Apr 05 16:49:57 [IKEv1 DEBUG]: IKE got SPI from key engine: SPI = 0x05953824 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 oakley constucting quick mode 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing blank hash 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing ISA_SA for ipsec 
Apr 05 16:49:57 [IKEv1]: Group = unityclient, IP = 64.102.51.191, 
 Overriding Initiator's IPSec rekeying duration from 2147483 to 28800 seconds 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing ipsec nonce payload 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing proxy ID 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Transmitting Proxy Id: 
  Remote host: 10.3.3.1  Protocol 0  Port 0 
  Local subnet:  0.0.0.0  mask 0.0.0.0 Protocol 0  Port 0 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Sending RESPONDER LIFETIME notification to Initiator 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing qm hash 
Apr 05 16:49:57 [IKEv1]: IP = 64.102.51.191, IKE DECODE SENDING Message
 (msgid=833e7945) with payloads : HDR + HASH (8) + SA (1) + NONCE (10)
 + ID (5) + ID (5) + NOTIFY (11) + NONE (0) total length : 176 
Apr 05 16:49:57 [IKEv1]: IP = 64.102.51.191, IKE DECODE RECEIVED Message
 (msgid=833e7945) with payloads : HDR + HASH (8) + NONE (0) total length : 48 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 processing hash 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 loading all IPSEC SAs 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Generating Quick Mode Key! 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Generating Quick Mode Key! 
Apr 05 16:49:57 [IKEv1]: Group = unityclient, IP = 64.102.51.191,
 Security negotiation complete for User (unityclient)  Responder,
 Inbound SPI = 0x05953824, Outbound SPI = 0xd08c6486 
Apr 05 16:49:57 [IKEv1 DEBUG]: IKE got a KEY_ADD msg for SA: SPI = 0xd08c6486 
Apr 05 16:49:57 [IKEv1 DEBUG]: pitcher: rcv KEY_UPDATE, spi 0x5953824 
Apr 05 16:49:57 [IKEv1]: Group = unityclient, IP = 64.102.51.191,
 Adding static route for client address: 10.3.3.1 
Apr 05 16:49:57 [IKEv1]: Group = unityclient, IP = 64.102.51.191, PHASE 2 COMP 
LETED (msgid=833e7945) 
Apr 05 16:50:07 [IKEv1]: IP = 64.102.51.191, IKE DECODE RECEIVED Message
 (msgid=403ee701) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE
 (0) total length : 80 
Apr 05 16:50:07 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 processing hash 
Apr 05 16:50:07 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Processing Notify payload 
Apr 05 16:50:07 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Received keep-alive of type DPD R-U-THERE (seq number 0x4b55b6e4) 
Apr 05 16:50:07 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Sending keep-alive of type DPD R-U-THERE-ACK (seq number 0x4b55b6e4) 
Apr 05 16:50:07 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing blank hash 
Apr 05 16:50:07 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing qm hash 
Apr 05 16:50:07 [IKEv1]: IP = 64.102.51.191, IKE DECODE SENDING Message
 (msgid=78998a29) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE
 (0) total length : 80 
Apr 05 16:50:17 [IKEv1]: IP = 64.102.51.191, IKE DECODE RECEIVED Message
 (msgid=dba719e9) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE (0)
 total length : 80 
Apr 05 16:50:17 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, processing hash 
Apr 05 16:50:17 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Processing Notify payload 
Apr 05 16:50:17 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Received keep-alive of type DPD R-U-THERE (seq number 0x4b55b6e5) 
Apr 05 16:50:17 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Sending keep-alive of type DPD R-U-THERE-ACK (seq number 0x4b55b6e5) 
Apr 05 16:50:17 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing blank hash 
Apr 05 16:50:17 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing qm hash 
Apr 05 16:50:17 [IKEv1]: IP = 64.102.51.191, IKE DECODE SENDING Message
 (msgid=40456779) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE
 (0) total length : 80

Informations connexes

Historique de révision

Révision Date de publication Commentaires
1.0
03-May-2007
Première publication

Ce document vous est-il utile?

FeedbackCommentaires

Contacter Cisco

Ce document s’applique à ces produits