Introducción
Este documento describe cómo limitar la entrega de velocidad a ciertos dominios o hosts.
Solución
El comando destconfig en la CLI o la Tabla de controles de destino en la pestaña Políticas de correo en la GUI se puede utilizar para configurar el límite de velocidad de entrega en el Cisco Email Security Appliance a un dominio o host específico. A veces se recomienda habilitar esta opción para evitar la sobrecarga de los hosts remotos.
A continuación se muestra un ejemplo de CLI sobre cómo limitar la entrega de tarifas al dominio "example.com".
mail.example.com> destconfig
There are currently 2 entries configured.
Choose the operation you want to perform:
- NEW - Create a new entry.
- EDIT - Modify an entry.
- DELETE - Remove an entry.
- DEFAULT - Change the default.
- PRINT - Display all entries.
- CLEAR - Remove all entries.
[]> new
Enter the domain you wish to limit.
[]> example.com
Do you wish to configure a concurrency limit for example.com? [Y]>
Enter the max concurrency limit for "example.com".
[500]> 100
Do you wish to apply a recipient limit to this domain? [N]> y
Enter the number of minutes used to measure the recipient limit.
[60]> 60
Enter the max number of recipients per 60 minutes for "example.com".
[]> 1000
Select how you want to apply the limits for example.com:
1. One limit applies to the entire domain example.com
2. Separate limit for each mail exchanger IP address
[1]>
Select how the limits will be enforced:
1. System Wide
2. Per Virtual Gateway(tm)
[1]>
Do you wish to apply a specific TLS setting for this domain? [N]>
Do you wish to apply a specific bounce verification address tagging setting for this domain? [N]>
Do you wish to apply a specific bounce profile to this domain? [N]>
There are currently 3 entries configured
Choose the operation you want to perform:
- NEW - Create a new entry.
- EDIT - Modify an entry.
- DELETE - Remove an entry.
- DEFAULT - Change the default.
- PRINT - Display all entries.
- CLEAR - Remove all entries.
[]>
mail.example.com> commit
Comentarios