Global Override Settings Tab
This chapter describes the Global Override Settings tab options. The following topics are covered in this section:
•Overview
•Global Override Options
Overview
The Global Override Settings tab enables you to select the override parameters used during the installation process by the Install Wizard. These settings apply to all client adapter profiles and override the settings in the individual profiles. Figure 3-1 shows the override parameters.
Figure 3-1 Global Override Settings Tab Window
To change a parameter option value, you must click an option value such as Yes. An option value window appears that enables you to change the value.
Global Override Options
Table 3-1 describes the options for the global override settings tab.
Table 3-1 Options for Global Override Settings
|
|
Allow Non Admin to Modify Profiles |
Specifies whether a user without administrator privileges can change the profiles. Only the Windows NT, the Windows 2000, or the Windows XP operating system supports this option. Note To avoid conflicting settings, check Allow Non-Administrative Users to Save Settings to the Registry under the ACU on the Installed Components tab. Note This option is not available for Windows 95, 98, and Me because these versions of Windows do not support different classes of users. Range: yes or no Default: yes |
Allow Edit Profile |
Specifies whether or not the ACU can be used to edit a client adapter configuration profile. Note When this parameter is set to no, the ACU does not allow the user to edit, import, or export profiles and the ACAT's Allow Export Profile and Allow Import Profile settings are ignored by the ACU. Range: yes or no Default: yes |
Allow Export Profile |
Specifies whether or not the ACU can be used to export a client adapter configuration profile to a disk file. Range: yes or no Default: yes |
Allow Import Profile |
Specifies whether or not the ACU can be used to import a client adapter configuration profile from a disk. Range: yes or no Default: yes |
Allow Edit WEP |
Specifies whether or not the ACU can be used to edit the WEP security options in a client adapter configuration profile. Range: yes or no Default: yes |
Log File Name |
Specifies the location of an installation log file (drive, directory, and log filename). |
Existing Profiles |
Specifies how the existing profiles are handled on the PC during the installation process. Range: Delete, Overwrite, or Preserve •Delete—All existing profiles are deleted prior to installing any new profiles. •Overwrite—Any existing profile with the same name as a new profile is overwritten. All other existing profiles are maintained and all new profiles are installed. •Preserve—All existing profiles are maintained. New profiles with the same name as existing profiles are not installed, but other new profiles are installed. Default: Overwrite |
Silent Setup |
Specifies whether the Install Wizard installation process is silent without requiring user input. Range: yes or no Default: yes |
Silent Setup Options |
Specifies the options available when Silent Setup is selected. When Prompt for reboot is selected, the installation process displays a message indicating a reboot is necessary and asks if you wants to reboot now. When Reboot silently is selected, the installation process automatically reboots the PC. When Do not reboot is selected, the installation process does not display a prompt message and waits for you to reboot the PC. Range: Prompt for reboot, Reboot silently, Do not reboot Default: Prompt for reboot |