CPS vDRA Administration Guide, Release 13.1.0

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

CPS vDRA Administration Guide, Release 13.1.0

Chapter Title

Managing DRA Operations

Results

Updated:
April 12, 2018

Chapter: Managing DRA Operations

Managing DRA Operations

Operations Overview

The Operation page enables you to access various interfaces and perform operations, maintenance, and troubleshooting activities. It assists system administrators and network engineers to operate and monitor the Policy Server.

Monitoring DRA

DRA monitoring page under operations includes the following options:

  • DRA Peer Monitoring

  • DRA Binding Monitoring

  • DRA SLF Bindings

  • Grafana

Peer Monitoring

DRA peer monitoring page displays the active peer endpoints (by default) for the cluster node. You can click the toggle for active/inactive peers to view the active or inactive peer endpoints.

You can use the filter option to filter active and inactive peer endpoints. You can also view all event logs and peer details for specific active or inactive peer endpoints of the cluster node.

Pagination support is provided in active and inactive peer endpoints table data. A number of rows per page drop-down is displayed below each table which contains the different set of numbers indicating the number of rows which can be shown per page. This option enables you to perform the following tasks:

  • Select the number of rows to be displayed in each page.

  • Specify the page to which you want to navigate.

View Filtered Data

    Step 1   In CPS DRA, navigate to DRA Peer Monitoring.
    Step 2   Select the Filter by drop down and click on any one of the following data options displayed:

    • All Visible Data

    • Host

    • Realm

    • Application ID

    • DRA Host

    • Peer Group

    • Session Routing Key

    • All Data

    Step 3   Enter a value in the Filter Peer Endpoints option.
    Step 4   Click Toggle for Active Peers to view filtered active peer endpoints or Toggle for Inactive Peers to view filtered inactive peer endpoints.

    The following table describes the details displayed under Peer Endpoints section:

    Table 1 Peer Endpoint Details

    Parameter

    Description

    Host

    Host name of the connected peer.

    Realm

    Realm of the connected peer.

    Application ID

    Identifier of the Diameter application (Gx, Rx, Sy, Sh and so on).

    DRA Host

    DRA host name and port.

    Peer Group

    Peer group of the connected peer.

    Session Routing Key

    Identifier to select peer for routing.

    Details

    Details of selected peer.

    Event Logs

    Log history of the peer connection.

    Note   

    • When All Visible Columns is selected, data in the table will be filtered according to the visible columns only that is the text which you have entered in the input box will be matched with the data present in the visible columns (Host, Realm, Application Id, DRA Host, Peer Group and Session Routing Key).

    • When All Data is selected, the entered text in the input field is checked across all the data of the active peer endpoints or inactive peer endpoints. In addition few other fields such as Last Connect Time, Peer Status and Key is matched to all visible columns.

    View Details

      Step 1   In CPS DRA, navigate to DRA Peer Monitoring.
      Step 2   Click Toggle for Active Peers to view active peer endpoints or Toggle for Inactive Peers to view inactive peer endpoints.
      Step 3   To view details of a particular peer, click Details.

      The following details are displayed:

      Table 2 Peer Endpoint Details

      Parameter

      Description

      Application ID

      Identifier of the Diameter application (Gx, Rx, Sy, Sh and so on).

      Peer Group

      Peer group of the connected peer.

      Session Routing Key

      Identifier to select peer for routing.

      Realm

      Realm of the connected peer.

      Last Connect Time

      Last connection time.

      Own Host

      Own host name and port of CPS vDRA.

      Peer Status

      Peer connection status (up/down).

      Direction

      Inbound/Outbound.

      Key

      Internal key/identifier assigned by CPS vDRA.

      Host

      Host name of the connected peer.

      View Event Logs

        Step 1   In CPS DRA, navigate to DRA Peer Monitoring.
        Step 2   Click Toggle for Active Peers to view active peer endpoints or Toggle for Inactive Peers to view inactive peer endpoints.
        Step 3   To view event logs of a particular peer, click Event Logs.

        The Peer Status Logs is displayed.

        Binding Monitoring

        CPS vDRA stores bindings in the mongo database. A binding database is needed to map search keys to PCRF binding information. Each binding has a search key and binding data associated with it.

        You can access CPS vDRA binding information based on the following supported search keys:

        • IMSI

        • IMSI + APN

        • MSISDN

        • MSISDN + APN

        • IPv6

        • IPv4

        View DRA Binding Details

        Perform the following steps to view DRA binding details:

          Step 1   In CPS DRA, navigate to DRA Binding Monitoring.

          Step 2   To view CPS vDRA binding information for a supported search key, click on any one of the following options displayed in the DRA Binding page:

          • IMSI

          • IMSI + APN

          • MSISDN

          • MSISDN + APN

          • IPv6

          • IPv4

          Step 3   Enter the required value. The search button is enabled which when clicked displays the following binding details:
          Table 3 DRA Binding Details

          Parameter

          Description

          APN

          Access Point Name (Called Station ID).

          Gx Session ID

          Gx Session Identifier (unique) assigned by PCEF.

          Session Routing Key

          Identifier to select peer for routing.

          Origin Host

          Host name of the connected peer.

          Age

          Duration of session establishment. Age format is as follows:

          xxxd xxh xxm xxs,

          Where:

          • d is days

          • h is hours

          • m is minutes

          • s is second

          Details

          CPS vDRA binding details.

          View Gx Session Details

            Step 1   In CPS DRA, navigate to DRA Binding Monitoring.
            Step 2   Select a supported search key and provide an input value in the search input field.
            Step 3   Click Search.

            CPS vDRA Bindings is displayed with two links for Gx Session ID and Details in each row.

            Step 4   To view Gx session details, click Gx Session ID.
            The following details are displayed in a Gx session details popup:
            Table 4 Gx Session Details

            Parameter

            Description

            Age

            Duration of session establishment.

            Gx Session ID

            Gx Session Identifier (unique) assigned by PCEF.

            IMSI

            International Mobile Subscriber Identity (15 digits).

            APN

            Access Point Name (Called Station ID).

            IPv4

            IPv4 PDN address.

            MSISDN

            Mobile Subscriber ISDN Number (11 digits).

            Origin Realm

            Origin-Realm AVP from Gx CCR-I message.

            Destination Realm

            Destination-Realm AVP from Gx CCR-I message.

            Origin Host

            Origin-Host AVP from Gx CCR-I message.

            Destination Host

            Destination-Host AVP from Gx CCR-I message.

            IPv6

            IPv6 PDN address.

            App Id

            Identifier of the Diameter application (Gx, Rx, Sy, Sh and so on).

            Session Route Key

            Identifier to select peer for routing.

            View Details

              Step 1   In CPS DRA, navigate to DRA Binding Monitoring.
              Step 2   Select a supported search key and provide an input value in the search input field.
              Step 3   Click Search.

              CPS vDRA Bindings is displayed with two links for Gx Session ID and Details in each row.

              Step 4   To view details, click Details.
              The following details are displayed in a details popup:
              Table 5 DRA Binding Details

              Parameter

              Description

              Age

              Duration of session establishment.

              Gx Session ID

              Gx Session Identifier (unique) assigned by PCEF.

              IMSI

              International Mobile Subscriber Identity (15 digits).

              APN

              Access Point Name (Called Station ID).

              Origin Host

              Host name of the connected peer.

              Session Route Key

              Identifier to select peer for routing.

              SLF Bindings

              This section describes how to view SLF Bindings details.

              View SLF Bindings Details

              Perform the following steps to view SLF binding details:

              In CPS DRA, navigate to DRA SLF Monitoring.
              The DRA SLF Monitoring page is displayed. You can access SLF binding information based on the following supported search keys:

              • Subscriber ID

              • IMSI

              • MSISDN


              View Subscriber ID Details

                Step 1   Select Subscriber ID.
                Step 2   Enter a valid subscriber ID.
                Step 3   Click Search. The following details are displayed in a Subscriber Details popup:

                Parameter

                Description

                Subscriber ID

                Unique identifier to identify the subscriber.

                Destination

                Destination specified in the map.

                SLF Destination Type

                Type of SLF destination specified in the map.

                SLF Destination

                SLF Destination specified in the map.

                Step 4   Click Details. The following details are displayed in a Subscriber Details popup:

                Parameter

                Description

                Subscriber ID

                Unique identifier to identify the subscriber.

                IMSI

                International Mobile Subscriber Identity (15 digits).

                MSISDN

                Mobile Subscriber ISDN Number (11 digits).

                Destination

                Destination specified in the map.

                SLF Destination Type

                Type of SLF destination specified in the map.

                SLF Destination

                SLF Destination specified in the map.

                View IMSI Details

                  Step 1   Select IMSI.
                  Step 2   Enter a valid IMSI.
                  Step 3   Click Search. The following details are displayed in a Subscriber Details popup:

                  Parameter

                  Description

                  IMSI

                  International Mobile Subscriber Identity (15 digits).

                  Subscriber ID

                  Unique identifier to identify the subscriber.

                  Destination

                  Destination specified in the map.

                  SLF Destination Type

                  Type of SLF destination specified in the map.

                  SLF Destination

                  SLF Destination specified in the map.

                  Step 4   Click Details. The following details are displayed in a Subscriber Details popup:

                  Parameter

                  Description

                  Subscriber ID

                  Unique identifier to identify the subscriber.

                  IMSI

                  International Mobile Subscriber Identity (15 digits).

                  MSISDN

                  Mobile Subscriber ISDN Number (11 digits).

                  Destination

                  Destination specified in the map.

                  SLF Destination Type

                  Type of SLF destination specified in the map.

                  SLF Destination

                  SLF Destination specified in the map.

                  View MSISDN Details

                    Step 1   Select MSISDN.
                    Step 2   Enter a valid MSISDN.
                    Step 3   Click Search. The following details are displayed in a Subscriber Details popup:

                    Parameter

                    Description

                    MSISDN

                    Mobile Subscriber ISDN Number (11 digits).

                    Subscriber ID

                    Unique identifier to identify the subscriber.

                    Destination

                    Destination specified in the map.

                    SLF Destination Type

                    Type of SLF destination specified in the map.

                    SLF Destination

                    SLF Destination specified in the map.

                    Step 4   Click Details. The following details are displayed in a Subscriber Details popup:

                    Parameter

                    Description

                    Subscriber ID

                    Unique identifier to identify the subscriber.

                    IMSI

                    International Mobile Subscriber Identity (15 digits).

                    MSISDN

                    Mobile Subscriber ISDN Number (11 digits).

                    Destination

                    Destination specified in the map.

                    SLF Destination Type

                    Type of SLF destination specified in the map.

                    SLF Destination

                    SLF Destination specified in the map.

                    Monitoring Installation Using Grafana

                    You can access the Grafana interface under DRA Monitoring to monitor installation. It is a third-party metrics dashboard and graph editor. Grafana provides a graphical or text-based representation of statistics and counters collected in the Graphite database.

                    For more information about Grafana in CPS, refer to the Graphite and Grafana chapter in the CPS Operations Guide.

                    Viewing CPS APIs

                    API information option enables you to view API related information:

                    • Service Orchestration API: to manage Policy Builder data

                    Select the link to view the documentation and usage examples.

                    Was this Document Helpful?

                    FeedbackFeedback

                    Contact Cisco