Cisco Catalyst IW9167E Heavy Duty Access Point Configuration Guide, Release 26.1.x

PDF

Cisco Catalyst IW9167E Heavy Duty Access Point Configuration Guide, Release 26.1.x

Access the Cisco Workgroup Bridge Web UI

Updated: April 10, 2026

Want to summarize with AI?

Log in

Learn how to access the Cisco Workgroup Bridge (WGB) Web UI dashboard by connecting a wired client, verifying connectivity, and logging in with the appropriate credentials.

This procedure describes how to access the Cisco Workgroup Bridge (WGB) Web UI dashboard by connecting a wired client, verifying connectivity, and logging in with the appropriate credentials.

Before you begin

  • Ensure your WGB switch has a wired client and is reachable on the 192.168.0.x network.

  • Configure the wired client and switch to access the Cisco WGB Web UI at its default IP address (192.168.0.10).

  • Perform these steps to access the Cisco WGB Web UI dashboard.

Procedure

1.

Access the Cisco WGB Web UI using a browser. Enter the IP address 192.168.0.10. Log in with the default credentials:

  • username—Cisco

  • password—Cisco

The Cisco WGB Web UI redirects you to its homepage. Ensure that the wired client and the Cisco WGB switch are on the 192.168.0.x network by verifying the client IP address.
2.

Ping 192.168.0.10 from the client to verify connectivity.
3.

Update the explicit login credentials.
4.

Log in using the new credentials to access the Cisco WGB Web UI.