Home
Support
Product Support
Wireless
Cisco Catalyst IW9167 Heavy Duty Series
Configuration Guides

Cisco Catalyst IW9167E Heavy Duty Access Point Configuration Guide, Release 26.1.x

Releases

26.1.x
17.18.x
17.17.x
17.16.x
17.15.x
17.14.x
17.13.x
17.11.x
17.9.x

How do you access the Cisco Workgroup Bridge Web UI?
How do you create wireless profiles and map SSIDs using Web UI?
How do you manage IP settings, NAT rules, and firmware images using Web UI?

View all Saved Content

PDF

Is this content helpful?

Helpful Unhelpful

Suggestions for Improvement

Thank you for your feedback. Your response has been recorded.

Ask about this content

Cisco Catalyst IW9167E Heavy Duty Access Point Configuration Guide, Release 26.1.x

How do you access the Cisco Workgroup Bridge Web UI?
How do you create wireless profiles and map SSIDs using Web UI?
How do you manage IP settings, NAT rules, and firmware images using Web UI?

Expand all sections

About this content

Introduction

Overview of the Access Point
Determine Image on IW9167EH
Configure AP to boot with different image options
Upgrade the IW9167EH to support WGB/uWGB
Related Documentation

AP Mode Configuration

Indoor deployment for -E domain
Configure indoor deployment for -E domain using CLI
Configure indoor deployment for -E domain using GUI
802.11ax 1600ns and 3200ns guard interval support
RAP Ethernet Daisy Chain
GNSS
Disable GNSS
Enable GNSS
Check the status of the GNSS module
GNSS status and diagnostics

Workgroup Bridges

Introduction and basics
Initial setup and core configuration
Upgrade the uWGB image
Configure WGB/uWGB Radio Parameters
Assign the Country Code to a WGB or uWGB with -ROW PID
Enable or disable indoor deployment for -E Domain and United Kingdom
Configure WGB roaming parameters
Advanced features and optimizations
AAA user authentications
Verification and monitoring
10 Mbps Speed Port Support on Cisco IW9167EH WGB

Manage the Workgroup Bridges through Web UI

Workgroup Bridge
Access the Cisco Workgroup Bridge Web UI
Monitor the client details and configurations
Configure and authenticate wireless profiles
Configure a static route for NAT wired client access to the WebUI in uWGB mode
Configure WGB and uWGB radio modes
Set IP address
Modify the RSSI threshold
Create NAT rules
Manage firmware images
Import or export a configuration file

Automated Frequency Coordination

AFC support for 6 GHz standard power mode
Verify AFC status on an AP

Cisco Catalyst IW9167E Heavy Duty Access Point Configuration Guide, Release 26.1.x

Import or export a configuration file

Updated: April 10, 2026

Want to summarize with AI?

Learn how to import or export a configuration file to back up current settings or restore them when needed.

This procedure describes how to import or export a configuration file.

You can import or export a configuration file to back up current settings or to restore settings when needed.

Procedure

	1.	Choose Administration > Configurations.
	2.	Click View detail to check the current configurations in Cisco WGB.
	3.	Click Download to download the configuration.
	4.	Upload the desired configuration to import it later when needed.
	5.	Click Upload & Apply . Note The desired configuration file must be of .txt format only. When you download the configuration, the file is saved to your browser.

Need help?

Open a support case

(Requires a Cisco Service Contract)

Bias-free language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.