Cisco Catalyst IW9167E Heavy Duty Access Point Configuration Guide, Release 26.1.x

PDF

Cisco Catalyst IW9167E Heavy Duty Access Point Configuration Guide, Release 26.1.x

Verify AFC status on an AP

Updated: April 10, 2026

Want to summarize with AI?

Log in

Learn how to verify the AFC request and response data, as well as the current operating power mode, on an AP using commands.

This procedure describes how to verify the AFC request and response data, as well as the current operating power mode, on an AP using commands.

Procedure

1.

Use the show rrm afc command to verify the AFC request and response data on the AP.

Example:

Device# show rrm afc

Location Type: 1
Deployment Type: 2
Height: 129
Uncertainty: 5
Height Type: 0
Request Status: 5
Request Status Timestamp: 2023-08-31T06:20:17Z
Request Id Sent: 5546388983266789933
Ellipse 1: longitude: -121.935066 latitude: 37.512830 major axis: 43 minor axis:
9 orientation: 36.818100
AFC Response Request ID: 5546388983266789933
AFC Response Ruleset ID: US_47_CFR_PART_15_SUBPART_E
2.

Use the show controllers dot11Radio 2 | i Radio command to verify the current operating power mode.

Example:

Device# show controllers dot11Radio 2 | i Radio
Dot11Radio2     Link encap:Ethernet  HWaddr 24:16:1B:F8:06:C0
Radio Info Summary:
Radio: 6.0GHz (SP)