Cisco Catalyst IW9167E Heavy Duty Access Point Configuration Guide, Release 26.1.x

Check the status of the GNSS module

Updated: April 10, 2026

Want to summarize with AI?

Describes how to verify the administrative state of the GNSS module on an access point using the show gnss info command.

Starting with release 26.1.1, you can set the state of the GNSS module to administratively down. Use this procedure on the AP to check the status of the GNSS module.

Procedure

Use the show gnss info command to view the status of the GNSS module.

Example:

Device# show gnss info

GNSS State Down

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.