Cisco Catalyst IW9167E Heavy Duty Access Point Configuration Guide, Release 26.1.x

PDF

Cisco Catalyst IW9167E Heavy Duty Access Point Configuration Guide, Release 26.1.x

Enable or disable indoor deployment for -E Domain and United Kingdom

Updated: April 10, 2026

Want to summarize with AI?

Log in

Learn how to enable or disable indoor deployment for the IW9167EH in the -E domain and United Kingdom, and verify the current mode and supported channels using CLI commands.

This procedure describes how to enable or disable indoor deployment for the IW9167EH in the -E domain and United Kingdom.

The IW9167EH supports indoor deployment for the -E domain and GB in the -ROW domain. In outdoor mode, the IW9167EH 5G radio supports channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140. When indoor deployment is enabled, the 5G radio supports these channels: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140.

Procedure

1.

Use the configure wireless indoor-deployment enable command to enable indoor deployment.

Example:

Device# configure wireless indoor-deployment enable
2.

Use the configure wireless indoor-deployment disable command to disable indoor deployment.

Example:

Device# configure wireless indoor-deployment disable
3.

(Optional) Use the show controllers Dot11Radio radio-interface command to view the WGB radio antenna gain.

Example:

Device# show controllers Dot11Radio 1

Radio Info Summary:
=======================
Radio: 5.0GHz
Carrier Set: (-Ei)  ( GB )
Base radio MAC: FC:58:9A:15:B7:C0
Supported Channels:
36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140

Device# show controllers Dot11Radio [1|2]
…
Radio Info Summary:
=======================
Radio: 5.0GHz
Carrier Set: (-E)  ( GB )
Base radio MAC: FC:58:9A:15:B7:C0
Supported Channels:
100 104 108 112 116 120 124 128 132 136 140

In the command output, "-Ei" indicates indoor mode is enabled, and "-E" indicates indoor mode is disabled. The supported channels are also displayed.