Learn how to configure Workgroup Bridge (WGB) roaming parameters, including threshold duration, signal strength, beacon miss count, packet retries, and static roaming channels.
Procedure
| 1. | Use the configure wgb mobile period time rssi-threshold command to configure the threshold duration and signal strength to trigger reconnection. Example:The default values are period 20s and threshold -70 dB. |
|
| 2. | Use the config wgb beacon miss-count count command to configure the beacon miss count that triggers reconnection. Example:The default value is 10. |
|
| 3. | Use the configure wgb packet retries retry-count command to configure the beacon miss count that triggers reconnection. Example:The default value is 64. |
|
| 4. | Use the configure wgb mobile station interface dot11Radio slot_id scan channel_id add command to configure the beacon miss count that triggers reconnection. Example: |
|
| 5. | Use the configure wgb mobile station interface dot11Radio slot_id scan channel_id delete command to delete the mobile channel. Example: |
|
| 6. | Use the configure wgb mobile station interface dot11Radio slot_id scan all command to scan all channels. Example: |