Covers WGB and uWGB configuration, including WLAN profiles, IP settings, SSID security, radio parameters, roaming, NAT, QoS, SNMP, packet capture, AAA, syslog, and monitoring.
Introduction and basics
Learn how to configure and operate Workgroup Bridge (WGB) deployments on the access point.
Initial setup and core configuration
Learn how to enable a Workgroup Bridge (WGB) to join a wireless network by configuring the WLAN and its associated settings.
Upgrade the uWGB image
Learn how to upgrade the uWGB image by converting the device to WGB mode, downloading and installing the new software image, and reverting to uWGB mode.
Configure WGB/uWGB Radio Parameters
Configuring WGB/uWGB Radio Parameters
Assign the Country Code to a WGB or uWGB with -ROW PID
Learn how to assign the proper country code to a WGB or uWGB device with a -ROW PID so that the device loads the correct power table after rebooting.
Enable or disable indoor deployment for -E Domain and United Kingdom
Learn how to enable or disable indoor deployment for the IW9167EH in the -E domain and United Kingdom, and verify the current mode and supported channels using CLI commands.
Configure WGB roaming parameters
Learn how to configure Workgroup Bridge (WGB) roaming parameters, including threshold duration, signal strength, beacon miss count, packet retries, and static roaming channels.
Advanced features and optimizations
Learn how to configure advanced features that enhance access point performance, mobility, security, and traffic handling.
AAA user authentications
Learn how to configure an external AAA server and how to enable or disable RADIUS authentication for login users.
Verification and monitoring
Learn how to verify and monitor access point operation using the available verification and logging capabilities.
10 Mbps Speed Port Support on Cisco IW9167EH WGB
10 Mbps Speed Port Support on Cisco IW9167EH WGB