Learn how to identify use cases and key considerations for understanding CAPWAP or LWAPP tunnel breaks between access points (APs) and the wireless controller, including references to additional troubleshooting resources.
The document provides use cases to understand the reason for the Control and Provisioning of Wireless Access Points (CAPWAP)/Lightweight Access Point Protocol (LWAPP) tunnel break between Access Points (APs) and the Wireless Controller.
For more information, see Troubleshoot Access Point Disassociation from Controller
There could be some changes in the software or hardware that can cause commands to stop working, the syntax to change, or GUIs and CLIs to look different from one release to another.
Feedback request
Your input helps. A key aspect to improving these support documents is customer feedback. Note that these documents are owned and maintained by multiple teams within Cisco. If you find an issue specific to the document (unclear, confusing, information missing, etc):
-
Provide feedback using the Feedback button located at the right panel of the corresponding article. The document owner will be notified, and will either update the article, or flag it for removal.
-
Include information regarding the section, area, or issue you had with the document and what could be improved. Provide as much detail as possible.
Disclaimer and caution
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, ensure that you understand the potential impact of any command.