CAPWAP protocol enables wireless LAN controllers to manage multiple access points and secure communication between APs and controllers using DTLS encryption.
Overview
Learn how the CAPWAP protocol enables wireless LAN controllers to manage multiple access points and secure communication between APs and controllers using DTLS encryption.
Indoor deployment
Learn how the indoor deployment mode for the IW9165E operates, including supported regulatory domains, default settings, and key considerations for access point deployment and frequency usage.
AFC support for 6 GHz standard power mode
Learn how Automated Frequency Coordination (AFC) supports 6 GHz Standard Power mode on the Cisco Catalyst IW9165E, including operational requirements, power limitations, and deployment considerations.
Verify AFC status on an AP
Learn how to verify the AFC request and response data, as well as the current operating power mode, on an AP using commands.
Antenna disconnection detection
Learn how the Antenna Disconnection Detection feature monitors antenna integrity on access points to ensure optimal performance and reliability by identifying impaired or disconnected antennas.
Troubleshooting
Learn how to identify use cases and key considerations for understanding CAPWAP or LWAPP tunnel breaks between access points (APs) and the wireless controller, including references to additional troubleshooting resources.
GNSS
Introduces GNSS enhancements in Release 26.1.1, including controller-based enable or disable support and improved runtime status and diagnostic output.
Disable GNSS
Explains how to dynamically disable GNSS on a specific access point to prevent inaccurate location reporting when satellite signals are weak.
Enable GNSS
Guides how to re-enable GNSS service on a specific access point from the controller using the appropriate geolocation command.
Check the status of the GNSS module
Describes how to verify the administrative state of the GNSS module on an access point using the show gnss info command.
GNSS status and diagnostics
Explains the enhanced GNSS diagnostic output, including satellite details, signal quality, location data, fix status, accuracy, and uncertainty information.