t_sec_url_filters_config

Available Languages

Updated:January 28, 2019

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

URL Filters

URL Filters

On the Configuration > Security > URL Filters page, click Add.

  1. In the Add URL Filter window that is displayed, enter a list name.

  2. From the Type drop-down list, choose the type as either PRE-AUTH or POST-AUTH.
  3. Use the slider to permit or deny the Action.
  4. In the Redirect Servers section, enter the IPv4 and IPv6 address.
  5. Enter a URL in the URLs field.
  6. Click Save & Apply to Device.

 

© 2018 Cisco Systems, Inc. All rights reserved.

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products