t_gen_set_sch_config_cust_profile

Available Languages

Updated:January 22, 2019

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Configuring Custom Profile Settings

Note: You must specify at least one transport mode, in the custom profile.

On the Profile tab, specify a name for the new profile.
To apply the profile to your device, set the Status button to Active. Multiple profiles can be active on your device.
Choose a transport mode to determine how Smart Call Home notifications should be delivered to you.
Choose Email, to receive Smart Call Home notifications via email. In the Address field, specify the email address to which to send notifications, and click +. You can add multiple email addresses. If you choose Email, specify at least one email address, and ensure that you configure a mail server for your email.
Choose HTTP/HTTPS, to send Smart Call Home notifications to a specified portal or website. Specify the location to which you want to send notifications, in the URL field and click +. If you choose HTTP/HTTPS, the HTTP URL is required. If you provide an HTTPS location as the URL, ensure that you have configured a certificate authorities (CA) trustpoint on your device. For more information on CA trustpoints, see About CA Trustpoints.
Optionally, you can set an HTTP/HTTPS proxy server using which notifications can be sent.
Click Next.