t_day0_config_basic_wired_wireless

Available Languages

Updated:January 28, 2019

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Configuring Basic Device Settings

Configuring Basic Device Settings

On the Basic Device Settings page configure the following information:

  1. In the Device ID and Location Settings section, type a unique name to identify your device in the network.
  2. Choose the date and time settings for your device. To synchronize your device with a valid outside timing mechanism, such as an NTP clock source, choose Automatic, or choose Manual to set it yourself.
  3. In the Device Management Settings section, assign an IP address to the management interface. Ensure that the IP address you assign is part of the subnet mask you enter.
  4. Enter an IP address to specify the default gateway.

Next Step

 

 

© 2018 Cisco Systems, Inc. All rights reserved.

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products