t_config_wlan_qos_avc

Available Languages

Updated:January 28, 2019

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Configuring QoS and AVC for WLANs/RLANs

Configuring QoS and AVC for WLANs/RLANs

  1. On the Configure > WLANs > QoS and AVC page, choose an Auto QoS policy.
  2. From the QoS SSID Policies drop-down list, choose the upstream and downstream QoS policies for the WLAN/RLAN. Valid QoS policies are

    • Platinum—Used for VoIP clients

    • Gold—Used for video clients

    • Silver— Used for traffic that can be considered best-effort

    • Bronze—Used for NRT traffic

  3. From the QoS Client Policy drop-down list, choose an egress and ingress QoS policy to associate with WLAN/RLAN clients.
  4. From the WMM drop-down list, choose a WiFi multimedia (WMM) policy for the WLAN/RLAN.
  5. To enable Application Visibility on your network, check the Application Visibility Enable check box.
  6. Associate an upsteam and downstream AVC profile with the WLAN/RLAN.
  7. Click Next.

 

 

© 2018 Cisco Systems, Inc. All rights reserved.

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco