Configuring Avdanced WLAN/RLAN Settings

1. Click Configuration>WLANs.
2. On the Wireless Networks page, click Add. The Add Wireless Networks page is displayed.
3. Click Advanced.

4. You can configure a WLAN/RLAN with a session timeout, in seconds. The session timeout is the maximum time for a client session to remain active before requiring reauthorization. The minimum session timeout allowed is 1 second and the maximum timeout allowed is 65535 seconds.

5. To configure timeout, in seconds, for deactivated client machine check the Client Exclusion check box. Client machines TBD page. A timeout setting of 0 indicates that the client is disabled permanently. Only users with administrative permissions can activate a deactivated client.

6. You can allow up to a maximum of 1000 clients to connect to your device, in the Maximum Allowed Clients field.

7. In the DHCP section, to make it mandatory for clients to obtain their IP address from the DHCP server, check the DHCP Address Assignment check box.

8. Enter the DHCP server on the WLAN that overrides the DHCP server address on the interface assigned to the WLAN/RLAN.

 

 

 

© 2018 Cisco Systems, Inc. All rights reserved.