t_config_radio_24ghz_high_thrghpt_config

Available Languages

Updated:January 22, 2019

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

High Throughput

High Throughput

On the Configuration > Radio Configurations > High Throughput page, you can configure high throughput for 802.11a/n/ac (5-GHz) and 802.11b/g/n (2.4-GHz) radios.

Note: You must disable your radio networks before you configure high throughput.

ClosedConfiguring High Throughput for 802.11a/n/ac (5-GHz Radios)
  1. Click 11n or 11ac to expand the section.
  2. Check the Enable 11n check box to enable 802.11n support on the network. To enable 802.11ac support check the Enable 11 ac check box.
  3. Check the check boxes of the rates you want, to specify the modulation and coding scheme (MCS) rates at which data can be transmitted between the access point and the client. Check the Select All check box to choose all the rates.
  4. Click Apply.
ClosedConfiguring High Throughput for 802.11b/g/n (2.4-GHz Radios)
  1. Check the Enable 11n check box to enable 802.11n support on the network.
  2. Check the check boxes of the rates you want, to specify the modulation and coding scheme (MCS) rates at which data can be transmitted between the access point and the client. MCS is a specification of PHY parameters consisting of modulation order (BPSK, QPSK, 16-QAM, 64-QAM) and FEC code rate (1/2, 2/3, 3/4, 5/6). Check the Select All check box to choose all the rates.
  3. Click Apply.

 

Related Topics Link IconRelated Topics

 

© 2018 Cisco Systems, Inc. All rights reserved.

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products