t_config_commands_upload

Available Languages

Updated:January 22, 2019

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Uploading Files from Your Device to a Server

Uploading Files from Your Device to a Server

  1. Choose Administration > Commands.
  2. On the Commands page, click the File Upload tab.
  3. From the File Type drop-down list, choose Configuration as the type of file you want to upload:
  4. From the Transfer Mode drop-down list, choose TFTPor FTP to upload files from your device.
  5. In the Server Details section, enter the IP address of the FTP or TFTP server that you want to use.
  6. Specify the path to indicate the location to which you want to upload the file, and the name of the file.
  7. Click Upload File.

 

© 2018 Cisco Systems, Inc. All rights reserved.

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco