t_sec_local_pol_config

Available Languages

Updated:January 22, 2019

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Creating Policy Maps

Creating Policy Maps

ClosedCreate Service Template
  1. On the Services > Security >Local Policy > Service Template page, click Add.
  2. Enter a name for your service template.
  3. In the VLAN ID field, enter the VLAN identifier that you want to associate with the policy. The value ranges from 1 to 4094.
  4. In the Session timeout field, enter the maximum amount of time, in seconds, after which a client is forced to reauthenticate. The value ranges from 1 to 65535 seconds.
  5. From the Access Control List drop-down list, choose the access control list you want to map to the policy.
  6. From the Ingress QoS drop-down list, choose the ingress QoS policy to be applied.
  7. From the Egress QoS drop-down list, choose the egress QoS policy to be applied.
  8. Click Done and Apply.
ClosedCreate Policy Map
  1. On the Services > Security >Local Policy > Policy Map page, click Add.
  2. Enter a name for your policy.
  3. In the Match Criteria List section, click Add.
  4. From the Device Type drop-down list, choose the device type. The match criteria for the device type can be eq, not-eq, or regex with respect to the device type you are choosing.
  5. In the User Role drop-down list, enter the role associated with the user. The match criteria for the user role can be eq, not-eq, or regex.
  6. From the Service Template drop-down list, choose the service template to be mapped to the policy.
  7. Click Done and Apply.

 

 

© 2018 Cisco Systems, Inc. All rights reserved.

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products